Quiz IT certification exam

Question 1

What is a benefit of using workload domains in VMware Cloud Foundation?

Accepted Answer

Workload domains are pre-configured and automatically deployed according to industry best practices for SDDC implementation.

Answer

Workload domains require separate instances of vCenter, decreasinq complexity and manaqement overhead.

Answer

Workload domains allow for manual provisioninq of vSphere clusters usinq the SDDC Manaqer.

Answer

Each workload domain can only support a maximum of three ESXi hosts, makinq it easy to manaqe small workloads.

Question 2

An architect is designing a new hosting platform for a healthcare provider with proposed locations in three regional areas.The following set of requirements have been provided by key stakeholders:REQ001 - The hosting platform must support long distance vMotion between the primary and secondary site.REQ002 - The maximum RTT (round-trip time) latency between the primary site and the secondary site must be less than 150milliseconds.REQ003 - The hosting platform must be manageable from assets located in the third site.REQ004 - Each location must scale to support a minimum of 35TB storage.Which requirement would be classified as a technical (formerly non-functional) requirement for the new hosting platform?

Accepted Answer

The maximum RTT (round-trip time) latency between the primary and secondary site must be less than 150 milliseconds.

Answer

Each location must scale to support a minimum of 35TB storaqe.

Answer

The hosting platform must be manageable from assets located in the third site.

Answer

The hosting platform must support long distance vMotion between the primary and secondary site.

Question 3

An architect is responsible for the design of a greenfield vSphere-based solution for hosting a new web-based application. The customer has provided the following high-level information:The solution will host a highly transactional web application that is spread across multiple workloads within a vSphere cluster.The workloads should be distributed evenly across the hosts to maximize the performance and availability of the web application.The architect has made various design decisions, including:The solution will deploy vSphere distributed switches for all virtual networking.Which network load balancing method should the architect document in the physical design to meet the requirements?

Accepted Answer

Route Based on IP Hash

Answer

Route Based on Physical NIC Load

Answer

Route Based on Originating Virtual Port

Answer

Route Based on Source MAC Hash

Question 4

An architect is working with stakeholders to define requirements for architecting a new VMware vSphere design.What are two strategies for engaging with stakeholders to achieve this goal? (Choose two.)

Accepted Answer

The architect conducts workshops with stakeholders to gather business and technical requirements.

Accepted Answer

The architect conducts multiple rounds of interviews with stakeholders, iteratively refining requirements.

Answer

The architect conducts workshops with the virtualization technical team to gather deployment justifications.

Answer

The architect conducts workshops and interviews limited to those stakeholders identified in the assessment phase of the project.

Answer

The architect conducts interviews focusing on business requirements to build the architectural business case.

Question 5

An architect is updating an existing design to include a new vSphere cluster to meet the following customer requirements:The solution must provide automatic load redistribution of workloads across all resources in the clusterThe solution must consider the usage patterns of workloads when performing load redistributionThe solution must provide capacity to reserve resources equal to two ESXi hosts for failover in the event of a host failureThe architect has also collected the following assumptions and constraints during the design workshops:A001 - Budget is available for additional hardware and software if required to meet the solution requirementsA002 - Capacity is available to allow the deployment of additional tooling to manage the solutionC001 - All management workloads must be deployed to the existing vSphere management clusterWhich three design decisions should the architect include to meet the documented requirements? (Choose three.)

Accepted Answer

The solution will enable the Predictive DRS option to avoid host over-commitment.

Accepted Answer

The solution will deploy a Distributed Resource Scheduler (DRS) enabled cluster with sufficient capacity to meet the workload demands.

Accepted Answer

The solution will deploy a vSphere Distributed Power Management (DPM) enabled cluster with sufficient capacity to meet the workload demands.

Answer

The solution will enable the Memory Metric for Load Balancing option to avoid host over-commitment.

Answer

The solution will deploy VMware Aria Operations to monitor the vSphere environment.

Answer

The solution will enable the VM Distribution option to avoid host over-commitment.

Question 6

An architect is designing a new workload domain in an existing VMware Cloud Foundation environment. The customer requirement is to physically separate the vSAN network traffic from other management network flows.Which design decision should the architect make to meet this requirement?

Accepted Answer

Deploy the new workload domain using multiple physical adapters.

Answer

Deploy the new workload domain using a vSAN stretched cluster.

Answer

Deploy the new workload domain using SDDC Manager.

Answer

Deploy the new workload domain using API.

Question 7

An architect is designing a new vSphere solution. The customer has stated that the solution will be used to host different types of applications, some of which have special considerations. The customer has provided the following information in relation to the special considerations:The applications are sensitive to the time it takes for CPUs to be accessible to process instructionsThe applications send and receive large amounts of data across the networkThe applications are sensitive to the time it takes for the data to be sent and received at the destinationWhat could the architect include in the design for these considerations?

Accepted Answer

Use vSphere Distributed Services Engine with Data Processing Units (DPUs) in the ESXi host hardware

Answer

Use vSphere Distributed Resource Scheduler (DRS) with affinity rules to keep the virtual machines on the same ESXi hosts

Answer

Use vSphere Distributed Services Engine with Network I/O Control on the distributed switch

Answer

Use vSphere Distributed Resource Scheduler (DRS) with SmartNICs in the ESXi host hardware

Question 8

Which is a benefit of using vSAN stretched clusters in VMware Cloud Foundation?

Accepted Answer

To enable high availability of virtual machines across different availability zones

Answer

To reduce the cost by eliminating the need for additional hardware and software components

Answer

To simplify physical network configurations by automatically configuring the required network components

Answer

To improve application performance by reducing network latency between availability zones

Question 9

An architect is documenting the logical design for a new vSphere solution. The following requirements have been provided to the architect by the customer for the design:The solution must be deployed in two locations: DC1 and DC2The solution must limit the impact radius of accidental changes by administratorsThe solution must meet a recovery time objective (RTO) of four (4) hours and recovery point objective (RPO) of 24hoursThe solution must allow workloads to run in both DC1 and DC2 during normal operationsThe solution must allow workloads to be moved bi-directionally between DC1 and DC2The solution must use hyper-converged infrastructure for the virtual machine storageThe customer has also confirmed that the network connection between DC1 and DC2 has a 10Gbps bandwidth with a maximum round trip latency of 4ms.The architect recommends the following design decision:Use separate clusters in DC1 and DC2 to form a multi-region designWhat should the architect include as justification for this design decision?

Accepted Answer

Using separate clusters mitigates the risk of an accidental change at the cluster level in DC1 from impacting DC2.

Answer

Sufficient capacity must be deployed in both DC1 and DC2 to support all running virtual machines.

Answer

Using separate clusters is the only configuration available that supports the RTO of four (4) hours.

Answer

The network connection between DC1 and DC2 does not support the use of stretched clusters.

Question 10

What is an example of a performance design quality?

Accepted Answer

The solution must scale to meet spikes in CPU demand.

Answer

The solution must provide 40 physical CPU cores and 20 TB of physical memory.

Answer

The solution must support applications with a maximum tolerable downtime (MTD) of four hours.

Answer

The solution must support applications with 1,000 transactions per second (TPS).

Question 11

An architect is responsible for designing a vSphere-based solution for a customer. The customer has the following requirements:The solution must provide redundancy and load balancing for storage trafficThe solution must tolerate at least one failureThere must be no single point of failure in the solutionWhich three considerations regarding physical host design should the architect analyze when making storage related design decisions? (Choose three.)

Accepted Answer

Use an active-active array for Fibre Channel storage-based VMFS datastores

Accepted Answer

Configure a minimum of two paths to every LUN or datastore

Accepted Answer

Configure a minimum of four paths to every LUN or datastore

Answer

Configure the fixed multi-pathing policy on the ESXi hosts

Answer

Use four single port storage host bus adapters (HBAs) in each ESXi host

Answer

Use one quad-port storage host bus adapter (HBA) in each ESXi host

Question 12

Which two vSphere cluster-related design details would an architect document in a physical design? (Choose two.)

Accepted Answer

The solution will set the das.isolationaddress advanced setting to 192.168.100.2.

Accepted Answer

The solution will configure vSphere High Availability (HA).

Answer

The solution will set the isolation.tools.diskshrink,disable advanced setting to true.

Answer

The solution will deploy a dedicated VMware Management Cluster into the primary site.

Answer

The solution will set the das.usedefaultisolationaddress advanced setting to true.

Question 13

An architect is tasked with designing a repeatable edge hosting solution using VMware technologies that can be deployed to existing hotels across the world and operate independently of other locations.During interviews with stakeholders, the architect notes the following information:There are 123 hotels in total.All hotels have a minimum of two 1Gbps connections for guest Internet access.The company operates hotels in four countries: Canada, USA, Cuba and Mexico.The company is rebranding the hotels located in Mexico.Which of these is a business factor that will impact this design?

Accepted Answer

The company is rebranding the hotels located in Mexico.

Answer

The company operates hotels in four countries: Canada, USA, Cuba and Mexico.

Answer

There are 123 hotels in total

Answer

All hotels have a minimum of two 1Gbps connections for guest Internet access.

Question 14

The following is a list of requirements from a discovery workshop for a new VMware hosting platform system design:REQ001 - The architecture must support recoverability to the VMware Cloud Disaster Recovery (VCDR) service.REQ002 - The architecture must support high availability (HA) and fault tolerance (FT).REQ003 - The architecture must support reducing existing energy consumption and carbon footprint.REQ004 - The architecture must provide support for network virtualization using distributed virtual switches.Which requirement would be classified as a business (formerly functional) requirement?

Accepted Answer

The architecture must support reducing existing energy consumption and carbon footprint.

Answer

The architecture must support high availability (HA) and fault tolerance (FT).

Answer

The architecture must support recoverability to the VMware Cloud Disaster Recovery (VCDR) service.

Answer

The architecture must provide support for network virtualization using distributed virtual switches.

Question 15

An architect is working on a new VMware vSphere design and notes the following information during interviews with stakeholders:The company has previously worked with multiple VMware partnersThe company has an internal security policy that is referenced in long running contractsThe company has an Enterprise License Agreement (ELA) with VMwareThe company has a multi-year cloud subscription agreementWhich of these is a business factor that will impact this design?

Accepted Answer

The company has an Enterprise License Agreement (ELA) with VMware.

Answer

The company has previously worked with multiple VMware partners.

Answer

The company has an internal security policy that is referenced in long running contracts.

Answer

The company has a multi-year cloud subscription agreement.

Question 16

An architect is responsible for designing a vSphere-based solution for a customer. The customer has the following requirement:There should be no single points of failure within the solution.Which three considerations regarding physical host design should an architect analyze when making network teaming-related design decisions? (Choose three.)

Accepted Answer

For NIC Teaming, all NICs in the same port group must be in the same layer 2 broadcast domain.

Accepted Answer

To increase availability, the NICs within a NIC team should be from different physical NIC Cards.

Accepted Answer

NIC Teaming requires a minimum of two physical network connections.

Answer

NIC Teaming requires a minimum of three physical network connections.

Answer

To increase performance, the NICs within a NIC team should be from the same physical NIC Card.

Answer

For NIC Teaming, all NICs in the same port group must be in the same routable network.

Question 17

An architect is responsible for designing a new vSphere-based solution to meet the following customer requirements:The solution must support component-level redundancy.The solution must support physical segregation of management and workload traffic.Any traffic from virtual infrastructure-level operations (such as migrations of workloads between hosts within a cluster) must not impact any workload.The solution should react to any substantial impact of physical network traffic to ensure workload traffic is unaffected.In response to this requirement, the architect makes the following logical design decisions:The solution will separate vSphere management traffic from all other network traffic.The solution will ensure that all replication and vMotion traffic will be separated from all other traffic.The solution will separate workload traffic from all other network traffic.The customer has a hardware standard for physical VMware ESXi host servers that includes 6 x 10GbE network.Which three physical design decisions should the architect make to meet the requirements? (Choose three.)

Accepted Answer

The solution will configure the six (6) available network connections into load balanced pairs.

Accepted Answer

The solution will deploy a vSphere distributed switch with three (3) uplink port groups.

Accepted Answer

The solution will configure the Route Based on Physical NIC Load load balancing method.

Answer

The solution will configure the Route Based on Source MAC Hash load balancing method.

Answer

The solution will deploy three (3) vSphere standard switches each with a single uplink port group.

Answer

The solution will configure the six (6) available network connections into a single load balanced group.

Question 18

An architect is responsible for the lifecycle management design for a brownfield vSphere-based solution.The following information has been provided during initial meetings around the new solution:Existing heterogeneous server hardware will be used to provide the hosting platform.The available hardware is:-- 10 servers that contain 2 x 20-Core Intel Xeon processors and 512GB RAM from Vendor A-- 10 servers that contain 2 x 24-Core Intel Xeon processors and 768GB RAM from Vendor A-- 20 servers that contain 2 x 16-Core AMD EPYC processors and 512GB RAM from Vendor B-- 10 servers that contain 1 x 24-Core AMD EPYC processors and 256GB RAM from Vendor CAll of the hardware is currently listed on the VMware Hardware Compatibility List (HCL).All existing server hardware has 36months vendor support remaining.The requirements from the customer are:REQ001 - The solution must support the hosting of 5,000 workloads across two physical sites.REQ002 - The solution should minimize the number of clusters.REQ003 - The solution must ensure that there is no impact to service when completing upgrades.Given the resource requirements needed for the solution, the architect has calculated that all of the existing servers will be required to provide sufficient resources for the new environment. The Intel-based servers will be deployed to the primary site and the AMD-based servers will be deployed to the secondary site.Which four additional design decisions should the architect make to ensure all requirements can be met? (Choose four.)

Accepted Answer

The solution will use VMware SDDC Manager to perform lifecycle management of the solution.

Accepted Answer

The solution will ensure each vSphere cluster supports a minimum of N + 1 redundancy.

Accepted Answer

The solution will use vSphere Lifecycle Manager images to update and upgrade vSphere ESXi hosts in the secondary site.

Accepted Answer

The solution will use vSphere Lifecycle Manager images to update and upgrade vSphere ESXi hosts in the primary site.

Answer

The solution will create an Intel-based 20-node vSphere cluster in the primary site and an AMD-based 30-node vSphere cluster in the secondary site.

Answer

The solution will use vSphere Lifecycle Manager baselines to perform patching and upgrading of vSphere ESXi hosts in the secondary site.

Answer

The solution will ensure each vSphere cluster is configured with Distributed Power Management (DPM).

Question 19

An architect is designing a new vSphere solution. The following information has been gathered during the design workshops with the customer:The solution will be deployed into two availability zones (AZs)The solution will be configured as a single stretched cluster with shared storage across the two AZsProduction and Development workloads will run across both AZsThe cluster is configured as N + 1The architect needs to ensure that, in the event of a host failure during maintenance of another host in the cluster, only the Production workloads are recovered.What should the architect include in the design to meet this requirement?

Accepted Answer

Configure vSphere HA Host Failure Response to Restart VMs Set the Development VMs to Disabled as the Restart Priority

Answer

Configure vSphere HA VM Monitoring to VM and Application Monitoring Set the VM monitoring sensitivity to Custom

Answer

Configure vSphere HA VM Monitoring to VM Monitoring only Set the VM monitoring sensitivity to Preset of High

Answer

Configure vSphere HA Host Failure Response to Restart VMs Set the cluster default Restart VM Restart Priority to Highest

Question 20

An architect is reviewing the information gathered from an initial requirements gathering workshop.The following requirements have been identified:REQ001 -- The architecture must support tracking of administrative logons and actions.REQ002 -- The architecture must support class three (three nines or 99.9%) system availability.REQ003 -- The architecture must report on system usage in terms of CPU, memory, storage and network.REQ004 -- The architecture must provide for system recovery point objective (RPO) of two hours.REQ005 -- The architecture must provide access to a precision time protocol (PTP) for time synchronization.Which two of the listed requirements would be classified as business (formerly functional) requirements? (Choose two.)

Accepted Answer

The architecture must support class three (Three nines or 99.9%) system availability.

Accepted Answer

The architecture must provide for system recovery point objective (RPO) of two hours.

Answer

The architecture must provide access to a precision time protocol (PTP) for time synchronization.

Answer

The architecture must report on system usage in terms of CPU, memory, storage and network.

Answer

The architecture must support tracking of administrative logons and actions.

Question 21

An architect is responsible for the following customer considerations in a hardware refresh:Capacity planning will ensure that the environment does not exceed 70% of peak-average utilization on deployment.CPU purchases will favor clock speed and last level cache over cores per socket.Additional ESXi hosts will be added to the cluster when CPU or memory utilization exceeds 70% for 3 consecutive business days.Path Selection policy will be set to round robin and set to switch paths with every SCSI command.vCPU to pCPU ratio may not exceed 5:1.What are three considerations when designing for performance? (Choose three.)

Accepted Answer

vCPU to pCPU ratio may not exceed 5:1.

Accepted Answer

CPU purchases will favor clock speed and last level cache over cores per socket.

Accepted Answer

Additional ESXi hosts will be added to the cluster when CPU or memory utilization exceeds 70% for 3 consecutive business days.

Answer

Path Selection policy will be set to round robin and set to switch paths with every SCSI command.

Answer

Capacity planning will ensure that the environment does not exceed 70% of peak-average utilization on deployment.

Answer

All ESXi hosts must have four paths to the storage array.

Question 22

An architect is tasked with designing a new workload domain in an existing VMware Cloud Foundation environment. The customer requirement is to physically separate the NSX host overlay network traffic from other management networks flows.Which design decision should the architect make to meet this requirement?

Accepted Answer

Deploy the new workload domain using multiple physical adapters.

Answer

Deploy the new workload domain with NSX Federation.

Answer

Deploy the new workload domain using SDDC Manager.

Answer

Deploy the new workload domain using API.

Question 23

An architect is designing the access management component of a vSphere-based solution. During a requirements gathering workshop, the customer states that the architecture must use a centralized user authentication solution.The architect decides that an Open Lightweight Directory Access Protocol (OpenLDAP) solution would meet the requirement. The security team intervenes and requires that the solution use the corporate Active Directory Domain Services solution.At which point did the architect's design become constrained?

Accepted Answer

When the customer required the use of the corporate Active Directory Domain Services solution.

Answer

When the customer provided the requirement for the use a centralized user authentication solution.

Answer

When the architect made the design decision to use an OpenLDAP solution for user authentication.

Answer

When the architect finished documenting all of the requirements.

Question 24

A company has a requirement that all production applications must have a maximum tolerable downtime (MTD) of one hour per month.Which statement would be included in the physical design to support this requirement?

Accepted Answer

vSphere HA Host Failure Response will be set to Restart VMs.

Answer

vSphere HA will be enabled on all clusters.

Answer

vSphere Fault Tolerance (FT) will not be enabled for the production applications.

Answer

Server hardware has already been purchased for the production applications.

Question 25

An architect is designing a new vSphere solution. The solution will be used to host workloads that have multiple dependencies. The customer provides the following information regarding the workloads:Workload 1: Self-Service PortalWorkload 2: DatabaseWorkload 3: Identity BrokerWorkload 4: Reporting ToolWorkload 5: Management ToolApplication A is formed of workloads 1 and 2 and has a dependency on workload 3Application B is formed of workloads 2 and 4 and has a dependency on workload 3Application C is formed of workload 5 and has a dependency on workload 4How should the architect document the vSphere HA requirements to ensure that all of the applications can be recovered in the event of a host failure while observing the dependencies?

Accepted Answer

Set vSphere HA to Restart VMs in response to a Host Failure Set the Restart Priority of workloads 3 and 4 to High Set the Restart Priority of workload 5 to Medium Set the Restart Priority of workloads 1 and 2 to Low

Answer

Set vSphere HA to Restart VMs in response to a Host Failure Set the Restart Priority of workload 3 to High Set the Restart Priority of workload 4 to Medium Set the Restart Priority of workloads 1, 2 and 5 to Low

Answer

Set vSphere HA to Shut Down and Restart VMs in response to a Host Isolation Set the Restart Priority of workloads 3 and 4 to High Set the Restart Priority of workload 5 to Medium Set the Restart Priority of workloads 1 and 2 to Low

Answer

Set vSphere HA to Shut Down and Restart VMs in response to a Host Isolation Set the Restart Priority of workload 3 to High Set the Restart Priority of workloads 4 and 5 to Medium Set the Restart Priority of workloads 1 and 2 to Low

Question 26

An architect is documenting the design for a new vSphere cluster. The customer provides the following information:All ESXi hosts will use hardware from the same vendorAll ESXi hosts will be monitored for hardware related issues using the vendor's monitoring toolingThe vendor's monitoring tooling provides a plugin for vCenter to allow the hardware status to be visibleThe customer also informs the architect of the following requirements:Workloads must be automatically relocated to other hosts in the event that a host hardware is marked as degraded.Workloads must be automatically restarted on other hosts in the event of a host failure.What should the architect include in the design to meet these requirements?

Accepted Answer

vSphere HA will be enabled and set to restart VMs in response to a host failure. Proactive HA will be enabled with an Automation Level of Automated.

Answer

vSphere HA will be enabled and set to Power off and Restart VMs in response to a host isolation. Proactive HA will be enabled with an Automation Level of Automated.

Answer

vSphere HA will be enabled and set to Power off and Restart VMs in response to a host isolation. VM Monitoring will be enabled with a setting of VM Monitoring.

Answer

vSphere HA will be enabled and set to restart VMs in response to a host failure. VM Monitoring will be enabled with a setting of VM and Application Monitoring.

Question 27

An architect is tasked with creating a design for a vSphere-based solution.Reviewing requirements with the security team, the architect makes the following design decision:ESXi hosts in the environment will enable shell sandbox for SSH connections and the local ESXi shellWhat is an implication of the design decision to enable shell sandboxing?

Accepted Answer

Only certain commands can be executed in the sandboxed shell

Answer

Only administrative accounts can access the sandbox shell

Answer

All commands executed in the sandbox shell will be logged

Answer

The vSphere 8 hosts will operate in strict lockdown mode

Question 28

A company has the business goal of automated, centralized, and efficient management of the data center.Which statement would be included in the conceptual design to support this business goal?

Accepted Answer

Join all vCenter instances to a single vCenter Single Sign-On domain.

Answer

Place the management cluster and the compute cluster in the same rack.

Answer

Reduce the cost of providing IT services to the organization.

Answer

Store templates and ISO files on a dedicated Virtual Machine File System (VMFS) datastore.

Question 29

What is a use case for a VMware Cloud Foundation consolidated architecture model?

Accepted Answer

Deploy an SDDC for a small-scale environment that can be extended later.

Answer

Run customer workloads in separate virtual infrastructure workload domains for scalability and autonomous licensing.

Answer

Implement a dedicated management domain for high availability of management workloads.

Answer

Deploy a large-scale environment with multiple vCenter instances for workload isolation.

Question 30

An architect is discussing the design of a vSphere solution with a customer. The following requirements have been defined for the solution:The solution must provide data encryption at restThe solution must provide the ability to reduce the amount of storage consumed from duplicate dataThe solution must minimize the amount of resources consumed by the encryption process.The architect has made a design decision that VM Encryption will be used to meet these requirements.Which two implications should the architect include in the design in relation to this design decision? (Choose two.)

Accepted Answer

Encryption is a CPU-intensive feature. The ESXi hosts should use the AES-NI BIOS setting to improve the performance of encryption and reduce CPU utilization.

Accepted Answer

When data is encrypted by the ESXi host, the effectiveness of de-duplication on the storage may be reduced.

Answer

Encryption is a CPU-intensive feature. Resource Pools should be used to assign shares to the encrypted VMs.

Answer

When data is encrypted by the storage device, the effectiveness of de-duplication on the storage will be unaffected.

Answer

Encryption is a memory-intensive feature. The ESXi hosts should use the AES-NI BIOS setting to improve the performance of encryption and reduce memory utilization.

Question 31

During the creation of a vSphere-based design solution, an architect identifies the following assumption:The customer will be responsible for providing all licensing for the vSphere platform.The storage hardware has sufficient capacity for future workload scale.The data center offers sufficient power, cooling and rack space for workload scale.When documenting each assumption within the design, which two corresponding pieces of information must the architect also define? (Choose two.)

Accepted Answer

The storage hardware may not have capacity for future workload scale.

Accepted Answer

Additional storage capacity can be procured to expand the solution in the future as needed.

Answer

The data center does not have sufficient capacity to meet the requirements for workload scale.

Answer

Additional data center locations have been identified. Contracts will be signed to bring the capacity online within 12 months.

Answer

The project sponsor is responsible for the data center capacity. The administrator is accountable and the architect is informed.

Question 32

An architect is designing a new vSphere architecture and notes the following information during the design workshops:vSphere distributed switches (VDS) will be used for all vSphere clusters. Switch naming will be based on cluster name, resource type function and switch number.Port group naming will be based on function, role and VLAN number range.Each host has two physical network cards each with two NIC ports:- Card A aligns to vmnic0 and vmnic1- Card B aligns to vmnic2 and vmnic3The architecture must provide resilient network connections.Management Services will use VLAN ID 43.Virtual machines access VLAN ID 100.The vSphere infrastructure will use a hyper-converged storage architecture.How should the architect document the VDS physical design based on the noted information?

Accepted Answer

vSwitch Prod_DVS_01 will have 4 uplinks Port group name 'pg_mgmt_43' - uplink = vmnic0, vmnic2 - teaming policy = active/passive Port group name 'pg_VM_100' - uplink = vmnic1, vmnic3 - teaming policy = active/passive

Answer

vSwitch Prod_DVS_01 will have 2 uplinks - uplink = vmnic0 - teaming policy = active/passive - uplink = vmnic1 - teaming policy = active/passive

Answer

vSwitch Prod_DVS_01 will have 4 uplinks - uplink = vmnic0, vmnic1 - teaming policy = active/passive - uplink = vmnic2, vmnic3 - teaming policy = active/passive

Answer

vSwitch Prod_DVS_01 will have 4 uplinks - uplink = vmnic0, vmnic2 - teaming policy = active/passive - uplink = vmnic1, vmnic3 - teaming policy = active/passive

Question 33

An architect is tasked with designing a new vSphere environment for a customer. The new environment must:Be standardized, repeatable, and consistentContain the same common heterogenous components that run from commercial hardware across an on-premises, edge, and broad hybrid cloud eco-systemProvide intrinsic and intelligent security in every component from the hypervisor to the storage, networking, and management layersWhich VMware solution will satisfy these requirements?

Accepted Answer

VMware Cloud Foundation

Answer

VMware Validated Design

Answer

VMware

Answer

VMware Validated Solutions

Question 34

An architect is designing a vSphere-based private cloud solution to support the following customer requirements:The solution should support running 5,000 concurrent production compute workloads across the primary and secondary sites.The solution should support running 1,000 development compute workloads within the secondary site.The solution should support up to 50 management workloads across the primary and secondary site.The solution must ensure the isolation of virtual infrastructure management operations between management and compute workloads.The solution must ensure that hosting of any virtual infrastructure management workloads does not impact the amount of capacity available for compute workloads.The solution must ensure that all production compute workloads are physically isolated from development compute workloads.The solution must ensure that the operational management of compute workloads in the secondary site is possible in the event of a disaster affecting the primary site.A combination of which four design decisions should the architect make to support the requirements? (Choose four.)

Accepted Answer

The solution will deploy a VMware vCenter instance in each management domain for the virtual infrastructure management of management workloads.

Accepted Answer

The solution will deploy a VMware vCenter instance in the secondary site management domain for the virtual infrastructure management of production compute workloads.

Accepted Answer

The solution will deploy a VMware vCenter instance in the primary site management domain for the virtual infrastructure management of production compute workloads.

Accepted Answer

The solution will deploy a separate management domain within each site for hosting local management workloads only.

Answer

The solution will deploy a VMware vCenter instance within the primary site management domain for hosting all management virtual machines.

Answer

The solution will deploy a VMware vCenter instance in the primary site management domain for virtual infrastructure management of production and development compute workloads.

Answer

The solution will deploy a VMware vCenter instance in the secondary site management domain for the virtual infrastructure management of production and development compute workloads.

Question 35

An architect is working on the design documentation for a new vSphere solution. The architect has completed a conceptual model based on the following requirement:REQ001 -- The solution must use shared storageWhat could the architect include in the logical design to meet this requirement?

Accepted Answer

The use of an NFS mount point, including the IP address of the NFS server it is hosted on

Answer

The use of an all flash vSAN datastore

Answer

The use of an HCI solution for a datastore

Answer

The use of File Based Storage, including the list of permissions applied to the share

Question 36

Refer to the exhibit.<img alt="VMware 3V0-21.23 image Question 76 63875516135303676935450"  width="606" height="317" src="https://examgecko.com/getfile/a98a0d6f-b6aa-45be-a208-75937bc2cb4a">An architect is assigned a new project to design a VMware hybrid cloud solution.The project is following a proven design methodology following the V-Model of systems engineering and verification. The selected methodology follows these phases: Assess, Design, Deploy and Validate.Which activity would be conducted during the Design phase?

Accepted Answer

The architect conducts a series of group interviews with stakeholders

Answer

The architect helps stakeholders learn the mechanics of the solution

Answer

The architect resolves configuration issues and addresses concerns

Answer

The architect defines the scope of the project

Question 37

An architect is working on the cluster layout design for a new vSphere solution. The resource requirements for the first cluster state that memory demand can experience spikes of up to 20% over the documented average demand during peak business hours and the cluster must be able to handle these spikes without contention.Which design quality is being referenced?

Accepted Answer

Performance

Answer

Availability

Answer

Recoverability

Answer

Manageability

Question 38

An architect is tasked with designing the implementation of the VMware Validated Solutions in an existing VMware Cloud Foundation environment that includes:Intelligent Operations ManagementIntelligent Logging and AnalyticsWhich two design elements must the architect include in the design to be able to accomplish the deployment of these two solutions? (Choose two.)

Accepted Answer

vSphere Lifecycle Manager

Accepted Answer

NSX Edge Cluster

Answer

Application Virtual Network (AVN)

Answer

vSAN Stretched Cluster

Answer

NSX Federation

Question 39

An architect is designing the implementation of the VMware Validated Solutions in an existing VMware Cloud Foundation environment.The design must meet the following requirements:Must provide logical networks that can span physical network boundaries and locationsMust use automatic Border Gateway Protocol (BGP) configuration for Top-of-Rack (ToR) switchesWhat should the architect recommend based on these requirements?

Accepted Answer

Overlay-backed NSX segments

Answer

A dedicated distributed virtual switch and dedicated port groups

Answer

VLAN-backed NSX segments

Answer

A dedicated NSX segment configured manually

Question 40

An architect is tasked with designing the VMware Validated Solutions in an existing VMware Cloud Foundation environment.The design must meet the following requirements:Must not allow logical networks to span physical network boundaries or locationsMust support static routingWhat should the architect recommend based on these requirements?

Accepted Answer

VLAN-backed NSX segments

Answer

Overlay-backed NSX segments

Answer

A dedicated distributed virtual switch and dedicated port groups

Answer

A dedicated NSX segment configured manually

VMware 3V0-21.23 Practice Test 2

VMware 3V0-21.23 Practice Tests