Native Azure VMs exist in a subnet (10.20.80.0/20) in the Prism Central VNet that need access to the workload running on the Nutanix User.What needs to be modified to allow access from the native Azure VMs to the workloads running in the Nutanix User VPC?

Adjust the Inbound Network Security Group on the Flow Gateway VM Internal NIC to allow traffic 102030,0/20.

Remove the ERP value on the transit VPC and Nutanix User VPC.

Change the ERP value to the the subnet range of the native Azure VMs (10.20.80.0/20) on the Transit VPC and the Nutanix User VPC.

Adjust the Inbound Network Security Group on the Flow Gateway VM External NIC to allow traffic 102030.0/20.

Adjust the Inbound Network Security Group on the Flow Gateway VM Internal NIC to allow traffic 102030,0/20.

Exhibit. AN NC2 on Azure Cluster was deployed with two Flow gateways in HA (FGW1 and FGW2). After a week of use. Four bare-metal nodes, were added to the NC2 cluster and additional workloads were added.It was determined that additional bandwidth for north/South traffic would be needed. Two additional Flow gateways were added (FGW3 and FGW4) from the NC2 portal configuration menu.The existing workloads prior to expansion on the NC2 cluster will be able to use which Flow Gateways using the No-Nat (routed) traffic path?

Only the Flow Gateway that each workload was originally using.

All Flow Gateways can be used after the existing workloads reboot.

FGW1 & FGW2 only, new workloads can use FGW3 & FGW4.

An administrator has created a new overlay network. Which is intended for the company's user VMs.The cluster has these characteristics:* Policy-based Routing is not configured*Only using external NAT*DNS Server: 8.8.8.8After adding a few VMs to the network, the administrator notices that the VMs cannot reach resources outside the network, even by IP address.What is a likely cause?

A default route was not configured for the external subnet.

The local cluster does not have access to the underlying network.

The VPC connection is not established.

A default route was not configured for the external subnet.

When selecting the NC2 subscription plan from the Nutanix billing portal, which options are available?

Pay-as-you-Go (payG), Bring your own License (BYOL)

Reserved instances, Cloud Provider Credits, Bring your own License (BYOL)

Reserved instances, Bring your own License (BYOL)

Pay-as-you-Go (PayG), Cloud Provider Credits, Bring you own License (BYOL)

An administrator is deploying an NC2 cluster in Azure and observes on NC2 console that nodes will not progress and continue in a Booting state.What is the most likely cause for the node not continuing to deploy?

The subscription has not been validated to be allowlisted by Microsoft.

The Azure account does not have an active subscription.

An Azure Support case must first be submitted for allowlisting the Azure subscription.

The subscription has not been validated to be allowlisted by Microsoft.

A private DNS server is being used that is not reachable.

Which address must Azure Directory Service be able to resolve when deploying a new NC2 cluster?

Gateway-external-api.cloud.nutanix.com

Gateway-internal-api-cloud.nutanix.com

An administrator deploys a new NC2 cluster in Azure in a new subscription. No VPN or Express Route exists.Which two actions will allow the administrator access to Prism Central to start the configuration? (Choose two.)

Deploy a Jump Host VM instance in an external VNet and peer the VNets.

Deploy a Jump Host VM instance in the Prism Central VNet inside a delegated subnet.

Deploy a Jump Host VM instance in an external VNet and peer the VNets.

Deploy a Jump Host VM instance and NAT Gateway in an external VNet and peer the VNets.

Deploy a Jump Host VM instance in the Prism Central VNet inside a delegated subnet.

Deploy a Jump Host VM instance in the Prism Central VNet inside a non-delegated subnet.

Exhibit. An administrator is trying to figure out why the NC2 cluster deployment in Azure failed.Which issue might be the cause?

The selected bare metal node type is not supported in the deployment region.

The administrator has not specified a DNS server during deployment.

The selected bare metal node type is not supported in the deployment region.

DNS servers are not reachable from cluster management VNet.

The company does not have sufficient NCI/AOS licenses.

A company wants to start using Nutanix Cloud Clusters (NC2) in Azure. The company has large spend commitments as part of a Microsoft Azure Consumption Commitment (MACC) totaling $15 million.What approach should the administrator take to ensure the Nutanix licensing costs apply to the MACC?

Purchase Nutanix licenses through the Azure Marketplace.

Request a trial directly from Nutanix.

Leverage existing Nutanix licenses

Purchase Nutanix licenses through the Azure Marketplace.

Purchase Nutanix licenses directly from Nutanix and contact Microsoft support.

An administrator needs the permission to create and manage multiple organizations and clusters in NC2, as well as manage user access for the entire company.What role should be assigned to meet the minimum requirements of this task?

Customer Security Administrator

An administrator needs to configure the correct outbound requirement for a successful cluster deployment in Azure.Which destination must have an outbound rule to meet this requirement?

Https://downloads.cloud.nutanix.com/*

A company is extending a subnet from their on-premises environment to an NC2 cluster on Azure. The company is considering using either a Virtual Tunnel End Point (VTEP) or a layer 2 subnet Extension over VPN.In which two scenarios would it be advantageous to use VTEP for this requirement? (Choose two.)

Connectivity between sites already provides encryption.

Multiple remote Availability Zones exist to add to the same VTEP-based extended Layer 2 subnet.

Connectivity between sites already provides encryption.

Only one remote Availability Zone exists that needs the subnet extended.

Connectivity between sites already does not provided encryption.

Multiple remote Availability Zones exist to add to the same VTEP-based extended Layer 2 subnet.

A nutanix user VPC called servers has three subnets called Tier1, tier2 and Darren-Tier3.* Servers:10.0.0.0/16* Tier1: 10.0.0.0/16* Tier2: 10.0.0.0.128/25* Darren-Tier3:10.0.4.0/24An administrator wants to keep Darren-Tier3 isolated and not receive any outside traffic.In order properly route for Tier1 and Tier2 coming from native subnets for Azure, what should the ERP be set to?

Transit VPC ERP set to 10.0.0.0/16 and Servers ERP set to 10.0.4.0/24

Transit VPC ERP set to 10.0.0.0/20 and Servers ERP set to 10.0.0.0/24

Transit VPC ERP set to 10.0.0.0/16 and Servers ERP set to 10.0.0.0/25

Transit VPC ERP set to 10.0.0.0/24 and Servers ERP set to 10.0.0.0/24

Transit VPC ERP set to 10.0.0.0/16 and Servers ERP set to 10.0.4.0/24

An administrator is planning to expand an NC2 on Azure cluster.Which statement is true regarding prerequisites for expanding the cluster?

Cluster must be in a Cluster Connected state.

Cluster must be in a Cluster Stopped state.

Cluster must have at least three nodes.

Cluster must be in a Cluster Connected state.

Cluster must have at least five nodes.

A company has just adopted Nutanix as their technology of choice and is preparing to deploy Nutanix Cloud Clusters (NC@)Which step must be taken first to gain access to the NC2 console?

Start a free trial via Billing Portal.

Open a support case with Nutanix.

An administrator ran into an issue during an NC2 cluster deployment on Azure. The administrator has logged a case with Nutanix Support.Support has requested the following logs from NC2 on Azure in order to diagnose the deployment issue:* Cluster_agent* Host_agent* HostsetupWhat action should the administrator take to ensure the collect the appropriate logs?

Login to Prism Element to access the CVM's console and run the logbay collect command.

SSH to the CVM and use the logbay collect command.

Login to Prism Element to access the CVM's console and run the logbay collect command.

SSH to the PCVM and use the logbay collect command.

Login to Prism Element Web Console to generate a Logbay bundle.

An administrator needs to extend an on-premises subnet to an NC2 cluster on Azure.Which set of options should the administrator configure to complete this task?

Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic IPv6 unicast traffic and ARP On-premises Hypervisor: ESXi and AHV

Subnet Type: VPC subnets Traffic Type: IPv4 unicast traffic and ARP On-premises Hypervisor: ESXi, AHV, Hyper-V

Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic IPv6 unicast traffic and ARP On-premises Hypervisor: ESXi and AHV

Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic and ARP On-premises Hypervisor: AHV

Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv6 umcasi traffic and ARP On-premises Hypervisor: Hyper-V

An administrator is seeking help with an ongoing NC2 issue. After reaching out to Nutanix support, the administrator is introduce to the NC2 specialist who can help troubleshoot the problem.How can the administrator verify that the NC2 specialist has access to the necessary organizations?

Confirm the Support Authorization on the organization is set to Full Access.

Provide the specialist with the administrator's login credentials.

Confirm the Support Authorization on the organization is set to Full Access.

Add the specialist as an admin user to the organizations.

Ensure the specialist is assigned the RBAC role with proper permissions.

Exhibit An NC2 on Azure cluster was deployed with two Flow Gateway in HA (FHW1 and FGW2). After a week of use, four bare-metal nodes were added to the NC2 cluster and additional workloads were added. The existing workloads were using floating IPs to allow inbound traffic to communicate with the running workloads on the NC2 cluster.It was determined that additional bandwidth for north/south traffic would be needed. Two additional Flow Gateways were added (FGW3 and FGW4) from the NC2 portal configuration menu.The existing workloads prior to expansion on the NC2 cluster will be able to use which Flow Gateways using the NAT traffic path after the expansion?

Only the Flow Gateway each workload was using prior to expansion.

They will be able to use FGW3 and FGW4 once the NC2 workloads reboots.

All four Flow Gateways using a MAC/Hash algorithm.

Only the Flow Gateway each workload was using prior to expansion.

Exhibit. Which action should the administrator take to troubleshoot the error shown in the exhibit?

Check the Azure AD App registration Client Secret.

Check the NC2 organization permissions.

Check the Azure AD App registration Client Secret.

Check the Azure subnet delegation status.

Check the PC VNet is peered correctly.

An administrator just completed the initial account setup tasks for NC2 on Azure, such as creating a My Nutanix account, starting a 30-day free trial for NC2 on Azure, and setting up the Azure account and subscription.Which two additional actions should the administrator take before creating a cluster? (Choose two.)

Allowlisting the Azure Subscription

Purchasing an Azure savings plan

Allowlisting the Azure Subscription

A company wants NC2 networking components to be created manually with the correct naming conversation. To achieve this the administrator manually creates the PC and Host VNets in Azure.What additional Azure Network components must the administrator manually create?

NAT Gateways, Delegated Subnets, Flow Gateway Subnets, VNet Peers

NAT Gateways. Delegated Subnets, Flow Gateway Subnets, Transit VPC

NAT Gateways, Delegated Subnets, Flow Gateway Subnets, VNet Peers

internet Gateways, Private Endpoints, Flow Gateway Subnets, VNet Peers

Internet Gateways. Delegated Subnets, Flow Gateway Subnets, VNet Peers

The cluster has the following configuration:A Transit VPC exists as Default, but is additionally configured with a overlay-external-subnet-nonat overlay subnetThe ERP for the Transit VPC is 10.1.1.0/25A User VPC exists named User_VPC_ProdThe ERP for the User VPC is 10.1.1.0/24Outbound and inbound routes have been configuredA User VM NO-NAT subnet has been configured in the User VPCThe administrator has successfully created a VM and added the NIC associated with the NO-NAT subnet, but is not able to communication with other resources.Which option will resolve this issue?

The ERP in the User VPC must be from a different CIDR range than the ERP in the transit VPC.

Ensure that the security groups associated with the VM allow traffic to and from the desired resources.

Verify that the route table associated with the User VPC has appropriate routes to the Transit VPC.

Check that the network ACLs for the NO-NAT subnet are not blocking the necessary traffic.

An NC2 on Azure environment requires that outside networks are allowed to be routed to a Nutanix User VPC from outside the cluster when using a No-Nat path.Which configuration will satisfy this requirement?

Externally routable IP address which shares the same address space of the Nutanix User VPC

Internally routable network address which shares the same address space of the Nutanix set VPC

Externally routable IP address which shares the same address space of the Native Azure Subnet

Internally routable network address which shares the same address space of the Native Azure Subnet

Externally routable IP address which shares the same address space of the Nutanix User VPC

Exhibit. An administrator is trying to create an NC2 cluster in Azure, but does not see the required region in the drop-down list.Which two steps could the administrator take to resolve this issue? (Choose two.)

Check the list of regions specified under the NC2 organization cloud account.

Ensure that the Azure region is whitelisted for use by Microsoft in the subscription.

Check the Azure subscription is created in the correct region.

Check the list of regions specified under the NC2 organization cloud account.

Check the NC2 Billing console to ensure the region is listed.

Ensure that the Azure region is whitelisted for use by Microsoft in the subscription.

An on-premises network has been extended to azure with a VPN/ExpressRoute. The routing and peering of VNets is setup and has been confirmed to be correct.Which statement best describes the state of the traffic flow between the on-prem CVMs and the NC2 CVMs in Azure?

The Network Security Group of the Flow Gateway VM on the Internal NICs will need to be edited to enable the traffic flow.

A ticket will need to be put in with Microsoft support to open the subnet ranges from on-premises.

Traffic will flow directly to the NC2 CVMs. Nothing will block the path by default.

The Network Security Group of the Flow Gateway VM on the Externa! NICs will need to be edited to enable the traffic flow.

Nutanix NCP-CI-Azure Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

An administrator is planning on building the network prior to deploying a Nutanix cluster into Azure.

Which two components require their own vNets for NC2 in Azure? (Choose two.)

Bare-metal instance

Prism Central

Azure Load Balancer

Virtual Network Gateway

Comment (0)

Nutanix NCP-CI-Azure Practice Test 1

Question

Nutanix NCP-CI-Azure Practice Tests

Practice Tests