An administrator wants to enable application discovery on a Nutanix cluster to monitor applications. A Prism Central instance is already configured with sufficient CPU and memory.What other prerequisites must be met before enabling application discovery? (Choose two.)

Sufficient Prism Central VM resources

An administrator has been tasked with justifying why Nutanix Disaster Recovery was chosen for a multi-tier application spanning multiple business units.What is the most efficient way to organize and manage the workloads?

Utilize Categories to organize VMs in Recovery Plans

Utilize a VM naming schema that allows sorting

Utilize Categories to organize VMs in Recovery Plans

Utilize a 1:10 ratio of Recovery Plan to VMs

Utilize RESTful APIs to script creation of Recovery Plans

An administrator is working with a network engineer to design the network architecture for a DR failover.Because DNS is well-designed, the DR site will use a different subnet but retain the same last octet in the IP address.What is the best way to achieve this?

Utilize Recovery Plan Offset-based IP mapping.

Use a custom script to update the IP address after instantiation in DR.

Set up IPAM so the address is dynamically assigned during DR.

Manually log into VMs after the DR event and update the last octet.

Utilize Recovery Plan Offset-based IP mapping.

An administrator has been asked to calculate baseline Capacity Runway on a newly registered AHV cluster.The cluster has been running for 16 days, but no runway projections are displayed.Why are no Capacity Runway projections being displayed?

Capacity Planning requires at least 21 days of data.

Capacity Planning requires at least 30 days of data.

Capacity Planning requires at least 21 days of data.

Capacity Planning requires at least 3 months of data.

Capacity Planning requires at least 6 months of data.

An administrator is configuring a replication schedule on multiple remote locations deployed using a single-node cluster. The goal is to achieve the lowest possible RPO (Recovery Point Objective).How should the administrator configure the replication schedule?

Configure a schedule for 1 minute up to 15 minutes.

Configure NearSync replication.

Configure a schedule for 16 minutes up to 59 minutes.

Configure a schedule for 1 minute up to 15 minutes.

An administrator needs to create a storage container for VM disks. The container must meet the following conditions:10 GiB of the total allocated space must not be used by other containers.The container must have a maximum storage capacity of 500 GiB.What settings should the administrator configure while creating the storage container?

Set Reserved Capacity to 10 GiB and Advertised Capacity to 500 GiB.

Set Advertised Capacity to 10 GiB and Reserved Capacity to 500 GiB.

Set Advertised Capacity to 10 GiB.

Set Reserved Capacity to 500 GiB.

Set Reserved Capacity to 10 GiB and Advertised Capacity to 500 GiB.

In a five-node cluster, an administrator noticed that three VMs are consuming too many resources on a single host.Acropolis Dynamic Scheduling (ADS) is not able to migrate these VMs.What is the most likely reason preventing ADS from migrating these VMs?

VM-VM anti-affinity policy is set.

VMs use external Network Attached Storage.

An administrator using a dark site deployment for LCM is attempting to upgrade to the latest BIOS.After completing an inventory scan, the administrator does not see the expected BIOS version available for upgrade.What is the most likely reason the latest BIOS is not shown?

The latest compatibility bundle has not been uploaded.

AOS needs to be upgraded first.

The latest compatibility bundle has not been uploaded.

The BMC version needs to be upgraded first.

The dark site webserver is not accessible.

An administrator is experiencing storage performance issues on a Windows Server 2019 VM with the following configuration:vCPU: 1VRAM: 8 GBvSCSI: VirtIO SCSI ControllervDisk: 2 (100 GB, 250 GB)vNIC: VirtIO Fast EthernetThe AHV cluster is healthy, and other Windows VMs are performing well.Which configuration change should be reviewed to enhance VM performance?

Increase the VM's number of vCPUs.

Add a second virtual storage controller (vSCSI).

Enable Balance-TCP on bridge (br0).

Increase Controller VM (CVM) resources.

Increase the VM's number of vCPUs.

An administrator needs to perform an LCM upgrade on an AHV host with GPUs.What additional step is required before upgrading the host?

Use Direct Uploads to upload appropriate driver bundles.

Create an agent VM on each host that has GPU drivers installed.

Run LCM in dark site mode so it can update AHV independently.

Use Direct Uploads to upload appropriate driver bundles.

Update NCC to the latest version and re-run Inventory.

What is supported for creating a VM Template in Nutanix?

VM has disks located on RF2 containers.

VM is protected by Protection Domain-based DR.

VM is an agent or a Prism Central VM.

VM has disks located on RF2 containers.

VM runs on the ESXi hypervisor.

An administrator has configured AHV Metro Availability with Witness and is testing failover scenarios.During testing, the administrator disconnects the primary and recovery clusters but Prism Central remains connected to the recovery site.What are two expected system behaviors? (Choose two.)

Guest VM I/O operations pause (freeze) until connectivity is restored.

Guest VMs failover automatically to the recovery cluster.

Guest VM I/O operations pause (freeze) until connectivity is restored.

Guest VM I/O operations pause (freeze) until connectivity between Prism Central and the primary site is restored.

Guest VMs failover automatically to the recovery cluster.

Guest VMs continue to run on the primary cluster.

What guest customization options are available when creating a VM template?

Sysprep, Cloud-init, Custom Script, Guided Script

None, guest customization is not supported in Nutanix templates.

An administrator is protecting an application and its data stored on Volume Groups using Protection Domains.During failover tests, all application VMs restore successfully, but the application data is completely missing.How can the Protection Domain configuration be adjusted to avoid this issue in the future? (Choose two.)

Select the 'Auto protect related entities' checkbox.

Manually add Volume Groups to Protected Entities.

Select the 'Auto protect related entities' checkbox.

Manually add Volume Groups to Protected Entities.

Place Volume Groups in a separate Protection Domain.

Use application-consistent snapshots.

An administrator is configuring Nutanix Disaster Recovery (DR) for a cross-hypervisor setup (ESXi to AHV) but finds that guest VMs do not recover properly at the DR location.What is required for a successful cross-hypervisor DR event?

Nutanix Guest Tools (NGT) must be installed on source guest VMs.

Deploy Legacy BIOS boot on hosts within the cluster.

Nutanix Guest Tools (NGT) must be installed on source guest VMs.

The team leads of a development environment want to limit developer access to a specific set of VMs.What is the most efficient way to enable the team leads to directly manage these VMs?

Create a Project for each team lead and assign access.

Create a role mapping for each team lead and assign appropriately.

Create a VPC for each team lead and give them VPC Admin.

Create a Project for each team lead and assign access.

Create Security Policies to isolate users.

An administrator needs to configure NTP on Prism Central running on a Hyper-V cluster.How should the administrator complete this task?

Add a server with a DNS hostname.

Add the IP of the Domain Controller.

An administrator receives an alert in Prism stating:'Storage container <container_name> on cluster <cluster_name> will run out of storage resources in approximately 1 day.'However, the cluster has plenty of available space remaining.What configuration setting is causing the container to run out of space while the cluster has space remaining?

Reserved Capacity is set too high.

Advertised Capacity is set too low.

Reserved Capacity is set too high.

Replication Factor is set too high.

Which two actions occur by default on a node that is placed in Maintenance Mode? (Choose two.)

All eligible VMs on the host are migrated to other hosts in the cluster.

Non-migratable VMs are powered off.

Non-migratable VMs are powered off and restarted on other hosts in the cluster.

All eligible VMs on the host are migrated to other hosts in the cluster.

All eligible VMs on the host are powered off.

Non-migratable VMs are powered off.

An administrator observes an alert in Prism for a hybrid SSD/HDD cluster:'Storage Pool SSD utilization consistently above 75%.'What is the potential impact of this condition?

Average I/O latency in the cluster may increase.

The cluster is unable to sustain an SSD disk failure.

The cluster may be nearly out of storage for metadata.

The cluster is at risk of entering a read-only state.

Average I/O latency in the cluster may increase.

An administrator wants to clean up inactive VMs using VM Efficiency in Nutanix.The business requires that VMs must be inactive for 120 days before deletion.A Playbook was created to delete Dead and Zombie VMs with a 99-day wait period after they are marked inactive.How long will have passed before these VMs are deleted? (Choose two.)

For Zombie VMs, the wait before deletion is 129 days.

For Dead VMs, the wait before deletion is 129 days.

For Dead VMs, the wait before deletion is 120 days.

For Zombie VMs, the wait before deletion is 129 days.

For Dead VMs, the wait before deletion is 129 days.

For Zombie VMs, the wait before deletion is 120 days.

How can a VM or Volume Group (VG) be associated with a Storage Policy?

Assign the VM or VG to the same Category as the Storage Policy.

Assign the Storage Policy directly on the VM or VG.

Assign the VM or VG directly to the Storage Policy.

Migrate the VM or VG to the Storage Container assigned to the Storage Policy.

Assign the VM or VG to the same Category as the Storage Policy.

An administrator is managing a 4-node cluster with different hardware generations:Two G5 Nodes 2 CPUs (12 cores), 1 SSD (1.92 TB), 2 HDDs (4 TB).Two G7 Nodes 2 CPUs (16 cores), 2 SSDs (1.92 TB), 4 HDDs (4 TB).The cluster will be decommissioned from production and used for Disaster Recovery (DR) purposes with an RPO of 1 hour.What is the best approach when replacing G5 nodes without impacting performance?

New node must have at least 2 SSDs.

New node must have 2 CPUs with 12 cores.

An administrator wants to live-migrate a vGPU-enabled VM from one host to another within the same cluster.What requirements must be met before initiating the migration?

The target host has sufficient resources to support the VM.

The vGPU profile needs to be changed.

The VM must be configured as an agent VM.

The host affinity for the VM must be set to a specific host.

Nutanix NCP-MCI-6.10 Practice Test 2 - Free Online Exam Prep & Questions

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

Nutanix NCP-MCI-6.10 Practice Test 2

Question

Nutanix NCP-MCI-6.10 Practice Tests

Practice Tests