What can the CLI command # diagnose test application oftpd 3 help you to determine?

What devices and IP addresses are connecting to FortiAnalyzer

What logs, if any, are reaching FortiAnalyzer

What ADOMs are enabled and configured

What devices are registered and unregistered

In FortiAnalyzer's FormView, source and destination IP addresses from FortiGate devices are not resolving to a hostname. How can you resolve the source and destination IPs, without introducing any additional performance impact to FortiAnalyzer?

Configure local DNS servers on FortiAnalyzer

Configure # set resolve-ip enable in the system FortiView settings

Resolve IPs on a per-ADOM basis to reduce delay on FortiView while IPs resolve

View the exhibit. Why is the total quota less than the total system storage?

Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files

3.6% of the system storage is already being used.

Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files

The oftpd process has not archived the logs yet

The logfiled process is just estimating the total quota

What purposes does the auto-cache setting on reports serve? (Choose two.)

To reduce report generation time

To automatically update the hcache when new logs arrive

To reduce report generation time

To automatically update the hcache when new logs arrive

To reduce the log insert lag rate

To provide diagnostics on report generation time

On FortiAnalyzer, what is a wildcard administrator account?

An account that permits access to members of an LDAP group

An account that allows guest access with read-only privileges

An account that requires two-factor authentication

An account that validates against any user account on a FortiAuthenticator

FortiAnalyzer uses the Optimized Fabric Transfer Protocok (OFTP) over SSL for what purpose?

To encrypt log communication between devices

To upload logs to an SFTP server

To prevent log modification during backup

To send an identical set of logs to a second logging server

To encrypt log communication between devices

Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy. What is the most likely problem?

The ADOM disk quota is set too low based on log rates.

The total disk space is insufficient and you need to add other disk.

The ADOM disk quota is set too low based on log rates.

Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.

What is the purpose of the following CLI command?

To add the MD's hash value and authentication code

To add a unique tag to each log to prove that it came from this FortiAnalyzer

View the exhibit. What does the data point at 14:35 tell you?

FortiAnalyzer is indexing logs faster than logs are being received.

FortiAnalyzer is dropping logs.

FortiAnalyzer is indexing logs faster than logs are being received.

FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.

The sqlplugind daemon is ahead in indexing by one log.

What statements are true regarding disk log quota? (Choose two)

The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.

The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.

The FortiAnalyzer stops logging once the disk log quota is met.

The FortiAnalyzer automatically sets the disk log quota based on the device.

The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.

The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.

What statements are true regarding FortiAnalyzer 's treatment of high availability (HA) dusters? (Choose two)

FortiAnalyzer distinguishes different devices by their serial number.

FortiAnalyzer receives logs from d devices in a duster.

FortiAnalyzer distinguishes different devices by their serial number.

FortiAnalyzer receives logs from d devices in a duster.

FortiAnalyzer receives bgs only from the primary device in the cluster.

FortiAnalyzer only needs to know (he serial number of the primary device in the cluster-it automaticaly discovers the other devices.

Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with SSL? (Choose two.)

SSL encryption levels are globally set on FortiAnalyzer.

SSL communications are auto-negotiated between the two devices.

SSL can send logs in real-time only.

SSL encryption levels are globally set on FortiAnalyzer.

FortiAnalyzer encryption level must be equal to, or higher than, FortiGate.

What statements are true regarding the 'store and upload' log transfer option between FortiAnalyzer and FortiGate? (Choose three.)

Only FortiGate models with hard disks can send logs to FortiAnalyzer using the store and upload option.

Both secure communications methods (SSL and IPsec) allow the store and upload option.

Disk logging is enabled on the FortiGate through the CLI only.

All FortiGates can send logs to FortiAnalyzer using the store and upload option.

Only FortiGate models with hard disks can send logs to FortiAnalyzer using the store and upload option.

Both secure communications methods (SSL and IPsec) allow the store and upload option.

Disk logging is enabled on the FortiGate through the CLI only.

Disk logging is enabled by default on the FortiGate.

Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)

Must establish an IPsec tunnel ID and pre-shared key.

IPsec is only enabled through the CLI on FortiAnalyzer.

Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.

Must establish an IPsec tunnel ID and pre-shared key.

IPsec cannot be enabled if SSL is enabled as well.

IPsec is only enabled through the CLI on FortiAnalyzer.

Which two statements about log forwarding are true? (Choose two.)

The client retains a local copy of the logs after forwarding.

You can use aggregation mode only with another FortiAnalyzer.

Forwarded logs cannot be filtered to match specific criteria.

Logs are forwarded in real-time only.

The client retains a local copy of the logs after forwarding.

You can use aggregation mode only with another FortiAnalyzer.

Consider the CLI command: What is the purpose of the command?

To add a unique tag to each log to prove that it came from this FortiAnalyzer

To add the MD5 hash value and authentication code

Which two statements are true regarding FortiAnalyzer log forwarding? (Choose two.)

Both modes, forwarding and aggregation, support encryption of logs between devices.

Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.

Both modes, forwarding and aggregation, support encryption of logs between devices.

In aggregation mode, you can forward logs to syslog and CEF servers as well.

Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.

Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.

An administrator has moved FortiGate A from the root ADOM to ADOM1. However, the administrator is not able to generate reports for FortiGate A in ADOM1.What should the administrator do to solve this issue?

Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.

Use the execute sql-local rebuild-db command to rebuild all ADOM databases.

Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.

Use the execute sql-report run ADOM1 command to run a report.

Use the execute sql-local rebuild-adom root command to rebuild the ADOM database.

Which statement is true regarding Macros on FortiAnalyzer?

Macros are ADOM specific and each ADOM will have unique macros relevant to that ADOM.

Macros are supported only on the FortiGate ADOM.

Macros are useful in generating excel log files automatically based on the reports settings.

Macros are predefined templates for reports and cannot be customized.

Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)

When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.

By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting

When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.

Collector mode is the default operating mode.

When in collector mode. FortiAnalyzer supports event management and reporting features.

By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting

Refer to the exhibit. The exhibit shows ''remoteservergroup'' is an authentication server group with LDAP and RADIUS servers.Which two statements express the significance of enabling ''Match all users on remote server'' when configuring a new administrator? (Choose two.)

It creates a wildcard administrator using LDAP and RADIUS servers.

Administrator can log in to FortiAnalyzer using their credentials on remote servers LDAP and RADIUS.

It creates a wildcard administrator using LDAP and RADIUS servers.

Administrator can log in to FortiAnalyzer using their credentials on remote servers LDAP and RADIUS.

Use remoteadmin from LDAP and RADIUS servers will be able to log in to FortiAnalyzer at anytime.

It allows administrators to use two-factor authentication.

A rogue administrator was accessing FortiAnalyzer without permission, and you are tasked to see what activity was performed by that rogue administrator on FortiAnalyzer.What can you do on FortiAnalyzer to accomplish this?

Click Task Monitor and view the tasks performed by that administrator.

Click FortiView and generate a report for that administrator.

Click Task Monitor and view the tasks performed by that administrator.

Click Log View and generate a report for that administrator.

View the tasks performed by the rogue administrator in Fabric View.

The admin administrator is failing to register a FortiClient EMS on the FortiAnalyzer device.What can be the reason for this failure?

ADOMs are not enabled on FortiAnalyzer.

FortiAnalyzer is in an HA cluster.

ADOM mode should be set to advanced, in order to register the FortiClient EMS device.

ADOMs are not enabled on FortiAnalyzer.

A separate license is required on FortiAnalyzer in order to register the FortiClient EMS device.

Refer to the exhibit. Which two statements are true regarding enabling auto-cache on FortiAnalyzer? (Choose two.)

This feature is automatically enabled for scheduled reports.

Enabling auto-cache reduces report generation time for reports that require a long time to assemble datasets.

Report size will be optimized to conserve disk space on FortiAnalyzer.

Reports will be cached in the memory.

This feature is automatically enabled for scheduled reports.

Enabling auto-cache reduces report generation time for reports that require a long time to assemble datasets.

Which two statements are true regarding high availability (HA) on FortiAnalyzer? (Choose two.)

FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings.

All devices in a FortiAnalyzer HA cluster must run in the same operation mode: analyzer or collector.

FortiAnalyzer HA can function without VRRP. and VRRP is required only if you have more than two FortiAnalyzer devices in a cluster.

FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings.

All devices in a FortiAnalyzer HA cluster must run in the same operation mode: analyzer or collector.

FortiAnalyzer HA implementation is supported by many public cloud infrastructures such as AWS, Microsoft Azure, and Google Cloud.

An administrator has moved FortiGate A from the root ADOM to ADOM1.Which two statements are true regarding logs? (Choose two.)

Archived logs will be moved to ADOM1 from the root ADOM automatically.

Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.

Analytics logs will be moved to ADOM1 from the root ADOM automatically.

Archived logs will be moved to ADOM1 from the root ADOM automatically.

Logs will be presented in both ADOMs immediately after the move.

Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.

Which two actions should an administrator take to view Compromised Hosts on FortiAnalyzer? (Choose two.)

Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to FortiAnalyzer.

Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date.

Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to FortiAnalyzer.

Make sure all endpoints are reachable by FortiAnalyzer.

Enable device detection on an interface on the FortiGate devices that are connected to the FortiAnalyzer device.

Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date.

Which two statement are true regardless initial Logs sync and Log Data Sync for Ha on FortiAnalyzer?

With initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.

When Logs Data Sync is turned on, the backup device will reboot and then rebuilt the log database with the synchronized logs.

By default, Log Data Sync is disabled on all backup devise.

Log Data Sync provides real-time log synchronization to all backup devices.

With initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.

When Logs Data Sync is turned on, the backup device will reboot and then rebuilt the log database with the synchronized logs.

Which two statements are true regarding fabric connectors? (Choose two.)

Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more efficient than third-party information from the FortiAnalyzer API.

Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3, Azure Blob , and Google Cloud.

Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more efficient than third-party information from the FortiAnalyzer API.

Fabric connectors allow to save storage costs and improve redundancy.

Storage connector service does not require a separate license to send logs to cloud platform.

Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3, Azure Blob , and Google Cloud.

What does the disk status Degraded mean for RAID management?

The hard driveiIs no longer being used by the RAID controller

One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the operating system.

The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array fault tolerant.

The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard drive to an optimal state.

The hard driveiIs no longer being used by the RAID controller

Fortinet FCP_FAZ_AD-7.4 Practice Test 3 - Free Online Exam Questions 81-120

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

Fortinet FCP_FAZ_AD-7.4 Practice Test 3

Question

Fortinet FCP_FAZ_AD-7.4 Practice Tests

Practice Tests