Regarding the wired sharing method, is the following description correct?

The wired sharing mode supports access to the computer through the HDMT interface and the sharing of the computer desktop.

After the plug and play function of shared materials is enabled, regardless of whether there is a venue in the meeting or not, you need to select the shared materials to the remote venue according to the interface prompts.

The wired sharing mode supports access to the computer through the HD-VI interface and the sharing of the computer desktop.

When shared materials plug and play is turned on, you can share your computer desktop content without additional action, regardless of whether there is a meeting where materials are being shared.

Regarding the VPT300 auto-tracking mode, what is the error described below?

In auto-track mode, the VPT300 features speakers when speaking simultaneously over a wide range or speaking quickly alternately.

The VPT300 automatically tracks panoramas, parts, or speakers in auto-track mode and combines picture-in-picture settings to deliver the best picture results.

In the auto track mode, the VPT300 automatically recognizes the two-person dialogue, and the bipartition screen displays the interlocutor.

VPT300 In auto-track mode, close-up speakers when speaking alone or in an orderly manner by multiple people.

In auto-track mode, the VPT300 features speakers when speaking simultaneously over a wide range or speaking quickly alternately.

After Joining IdeaHub , the remote images seen locally are blurry, mosaic, solidified, discontinuous, etc., which of the following reasons may be caused?

The terminal example network egress is busy, resulting in only a relatively low video bandwidth obtained locally.

The video camera on this end is malfunctioning.

Packet loss exists in the network between the endpoint and the MCU.

The far-end video camera is malfunctioning.

The terminal example network egress is busy, resulting in only a relatively low video bandwidth obtained locally.

The video camera on this end is malfunctioning.

Packet loss exists in the network between the endpoint and the MCU.

The far-end video camera is malfunctioning.

Before the meeting, a basic check of the Idealub is generally required to ensure that it can be used normally. Basic pre-sessional checks include ( ).

Server registration status check

Is the following description of the VP96 Series MCU network access characteristics correct?

GEO is a service network port that is used for signaling and media streaming communications in the MCU.

When the electrical port and the optical port are plugged in at the same time, the electric port is used preferentially.

The FE port and the GEO port are mutually backup, providing network port backup function.

GEO is a service network port that is used for signaling and media streaming communications in the MCU.

When the MCU is connected to the network, the network cable needs to be connected to the FE port.

Is the following description of the VP98 Series MCUs correct?

The VP9850 provides a 4*GE ethernet card and an outgoing 1000Mbps Ethernet port.

The VP98 series is a box MCU that supports "1+1" power module backup.

The VP98 series MCUs provide a 1000Mbps Ethernet port for server device management.

Huawei VP98 series MCUs have 4K full-edit and full-solution processing capabilities.

The VP9850 provides a 4*GE ethernet card and an outgoing 1000Mbps Ethernet port.

The VP98 series is a box MCU that supports "1+1" power module backup.

The VP98 series MCUs provide a 1000Mbps Ethernet port for server device management.

Huawei VP98 series MCUs have 4K full-edit and full-solution processing capabilities.

What is the following statement about KU resource pools correct?

When the resources of a single MCU in the region are insufficient, the two MCUs with the most abundant resources in the priority area are cascaded.

In the same service area, the system will preferentially select the MCU with the same prefix and the most abundant resources for venue access.

SUC3.0 unifies the management and scheduling of MCUs to achieve load balancing, sharing, and redundant backup of MCU resources.

The system matches the number prefix of the service area with the terminal number and determines the NCU resource pool that the terminal preferentially accesses.

When the resources of a single MCU in the region are insufficient, the two MCUs with the most abundant resources in the priority area are cascaded.

In the same service area, the system will preferentially select the MCU with the same prefix and the most abundant resources for venue access.

SUC3.0 unifies the management and scheduling of MCUs to achieve load balancing, sharing, and redundant backup of MCU resources.

The system matches the number prefix of the service area with the terminal number and determines the NCU resource pool that the terminal preferentially accesses.

After the free discussion mode is enabled on the SMC3.0 conference interface, what is the following description incorrect?

Microphones and loudspeakers for all meeting rooms or attendees will be turned on.

Turn off the microphones of all conference rooms or participants.

In addition to the speech venue, the microphones of other conference rooms or participants will be muted.

Microphones and loudspeakers for all meeting rooms or attendees will be turned on.

In addition to the Chair's Room, microphones from other conference rooms or attendees will be turned off.

Turn off the microphones of all conference rooms or participants.

In addition to the speech venue, the microphones of other conference rooms or participants will be muted.

Regarding the SMC3.0 Backup Service Area, is the following description correct?

When the conference resources in this service area are insufficient, the system will use the conference resources in the corresponding backup service area.

Multiple backup service areas can be configured for a service area.

When the conference resources in this service area are insufficient, the system will use the conference resources in the corresponding backup service area.

Each service area must be configured with a backup service area.

The default Default service area of the system must be configured with the backup service area.

Regarding C1oudRSE's on-demand and live streaming capabilities, is the following description correct?

When users want to play dual-stream video, support one-click layout switching, and can switch between video and conference materials.

CloudRSE cannot switch video formats (HD or SD) when watching live or on-demand.

Users do not need to install a plug-in to watch live and on-demand videos on CloudRSE.

CloudRSE supports video and conferencing materials in a full-screen, picture-in-picture layout.

When users want to play dual-stream video, support one-click layout switching, and can switch between video and conference materials.

CloudRSE cannot switch video formats (HD or SD) when watching live or on-demand.

Users do not need to install a plug-in to watch live and on-demand videos on CloudRSE.

CloudRSE supports video and conferencing materials in a full-screen, picture-in-picture layout.

Regarding the image resolution, what is wrong with the following statement?

The more pixels the image displayed on the screen, the sharper the image effect.

The "p" in 0p indicates interlacing.

The more pixels the image displayed on the screen, the sharper the image effect.

4CIF belongs to the SD resolution.

1080p resolution images contain approximately 2 megapixels.

Regarding the RAS message, is the following statement correct?

Endpoint registration messages can be used for terminal switching capabilities, encryption, and so on.

Call acceptance information is used for terminal call request authentication.

Status queries are used by GK to query the current state of an entity.

Endpoint positioning is used to confirm address information across multiple GKs.

Endpoint registration messages can be used for terminal switching capabilities, encryption, and so on.

Call acceptance information is used for terminal call request authentication.

Status queries are used by GK to query the current state of an entity.

Endpoint positioning is used to confirm address information across multiple GKs.

In a cascade meeting, the media flow from the lower venue to the higher venue is ( ).

Broadcast venue - subordinate MCU - superior MCU - superior venue

Broadcast venue - superior MCU - subordinate MCU - superior venue

Broadcast venue - subordinate MCU - superior MCU - superior venue

Broadcast venue - Superior MCU - Superior venue

Broadcast Venue - Subordinate MCU - Superior Venue

Huawei H11-851_V3.0 Practice Test 11 - Free Online Exam Questions 401-440

Through the COM port cable to connect the RS-232 control interface of the HD camera and the COM port of the HD terminal , it can realize the remote control of the camera pan/tilt/zoom, preset position, etc. of the HD terminal, COM The length of the port cable is fixed and cannot be extended.

Become a Premium Member for full access

Unlock Premium Member

Huawei H11-851_V3.0 Practice Test 11

Question

Huawei H11-851_V3.0 Practice Tests

Practice Tests