ExamGecko
Home Home / Huawei / H12-224

Huawei H12-224 Practice Test - Questions Answers, Page 33

Question list
Search
Search

For a network like 175.25.128.0/19, the mask value is?

A.
255.255.0.0
A.
255.255.0.0
Answers
B.
255.255.224.0
B.
255.255.224.0
Answers
C.
255.255.24.0
C.
255.255.24.0
Answers
D.
Different based on the address type
D.
Different based on the address type
Answers
Suggested answer: B

Which of the following statements about Stub areas is false?

A.
An AS-external-LSA cannot be advertised to a Stub area.
A.
An AS-external-LSA cannot be advertised to a Stub area.
Answers
B.
The ABR in the Stub area generates a default route to guide forwarding of packets destined for other areas.
B.
The ABR in the Stub area generates a default route to guide forwarding of packets destined for other areas.
Answers
C.
A Transit area cannot be configured as a Stub area.
C.
A Transit area cannot be configured as a Stub area.
Answers
D.
Any area can be configured as a Stub area.
D.
Any area can be configured as a Stub area.
Answers
Suggested answer: D

If the network address 172.29.100.0/16 is subnetted, which of the following valid VLSM subnets can be obtained?

A.
172.29.100.8/28
A.
172.29.100.8/28
Answers
B.
172.29.100.32/28
B.
172.29.100.32/28
Answers
C.
172.29.100.60/28
C.
172.29.100.60/28
Answers
D.
172.29.100.104/28
D.
172.29.100.104/28
Answers
Suggested answer: B

Which of the followings are OSPF packet type? (Choose three.)

A.
LSA
A.
LSA
Answers
B.
LS Request
B.
LS Request
Answers
C.
LSP
C.
LSP
Answers
D.
LS Update
D.
LS Update
Answers
E.
LS Ack
E.
LS Ack
Answers
Suggested answer: B, D, E

The IP address 0.0.0.0 indicates ().

A.
Network address
A.
Network address
Answers
B.
Broadcast address of specially designated network segment
B.
Broadcast address of specially designated network segment
Answers
C.
All networks
C.
All networks
Answers
D.
Broadcast address of all nodes of local network segment
D.
Broadcast address of all nodes of local network segment
Answers
Suggested answer: C

What is the link ID of an ASBR-Summary-LSA?

A.
OSPF Router ID of an LSA's originator
A.
OSPF Router ID of an LSA's originator
Answers
B.
Port IP address of the DR on the described network segment
B.
Port IP address of the DR on the described network segment
Answers
C.
Address of the destination network segment
C.
Address of the destination network segment
Answers
D.
Router ID of the destination ASBR
D.
Router ID of the destination ASBR
Answers
Suggested answer: D

When the GR Restarter performs the active/standby switchover, the neighbor performs which of the following operations when detecting that a TCP disconnection? (Choose three.)

A.
Keeping the routing tables of various address families advertised by the GR Restarter during negotiation, marking entries in these tables with stale tags, and starting a stale timer
A.
Keeping the routing tables of various address families advertised by the GR Restarter during negotiation, marking entries in these tables with stale tags, and starting a stale timer
Answers
B.
Starting a restart timer.
B.
Starting a restart timer.
Answers
C.
Clearing all routing entries and forwarding entries related to the GR restarter if the GR restarter fails to re-establish the BGP connection with the neighbor after the restart timer expires.
C.
Clearing all routing entries and forwarding entries related to the GR restarter if the GR restarter fails to re-establish the BGP connection with the neighbor after the restart timer expires.
Answers
D.
Remaining the neighbor relationship unchanged.
D.
Remaining the neighbor relationship unchanged.
Answers
Suggested answer: A, B, C

On a broadcast network or an NBMA network, not all neighbors need to set up adjacencies. Therefore, the concept about the adjacency is applicable to only the broadcast network or the NBMA network.

A.
True
A.
True
Answers
B.
False
B.
False
Answers
Suggested answer: B

Which is the default network mask length of 219.25.23.56?

A.
8
A.
8
Answers
B.
16
B.
16
Answers
C.
24
C.
24
Answers
D.
32
D.
32
Answers
Suggested answer: C

If both the ospf cost and bandwidth-reference commands are configured on an interface, the value set in the ospf cost command is used as the cost of the interface.

A.
True
A.
True
Answers
B.
False
B.
False
Answers
Suggested answer: A
Total 803 questions
Go to page: of 81