You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

It will be transmitted in vlan 1.

It will be transmitted in vlan 2

It will be transmitted in vlan 50.

A customer is moving a server from a co-location facility back into their existing data center to comply with new internal policies on data management Due to budget constraints, the customer cannot purchase any additional switches and will need to use an existing end-of-row design with HPE FlexFabric switches While the server will be installed six racks away from the switches, the total cable run with cable management Is expected to be 35 m.Which component should be selected when designing the 10 Gbps connectivity option for the server?

SFP+ Direct Attach Copper Cable

A customer is subject to regulatory requirements and their data is highly sensitive.Which HPE Smart Array feature addresses their need for an level of security for data stored inside their server?

Smart Battery backed-up write-cache

Why is SNMPv2c considered to be insecure?

SNMPv2c community strings are transmitted in clear text

SNMPv2c agents only accept GET requests which match their read-only community string

SNMPv2c community strings are transmitted in clear text

SNMPv2c only allows the signing of the message payload

SNMPv2c agents only encrypt WRITE messages.

A client needs a data center network for a highly-virtualized server environment. They have the following requirements• 25 Gb connectivity from the servers to the top-of-rack switches• support for iSCSl storage• lowest possible latency between their VM farms, which are contained In separate cabinets and connected to different top-of-rack switches within the data center• support for Python script interpretation and open APIsWhich networking product line and architecture should you recommend?

ArubaOS-Swrtch configured in a spine/leaf architecture with 5406R switches at the spine and 2930M leaf switches

ArubaOS-CX configured in a spine/leaf architecture with 8325 switches at the spine and 8320 leaf switches utilizing VSX between cabinets

ArubaOS-CX configured in spine/leaf architecture with 8325 switches at the spine and leaf

HPE FlexFabicc configured in a traditional two-tier architecture with 5950 switches at the core and 5940 access switches configured using IRF stacks per cabinet

When should you choose to populate a server with LRDlMMs?

when memory speed is the most important factor

when error correction is the most important factor

when price is the most important factor

when memory capacity is the most important factor

when memory speed is the most important factor

A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.Which HPE solution best meets the customer requirements?

HPE Proliant for Microsoft Azure Stack

For which virtualization management products does HPE OneView offer integration plug-ins1?(Select two.)

Nutanix Prism infrastructure Manager

Red Hat Enterprise Virtualization Manager

A customer is experiencing read cache hit ratios well below 80 percent on an HPE Nimble HF40 array Data is constantly being ejected from the Nimble array's First In First Out cache What should you recommend?

Turn off deduplication on affected volumes

Upgrade the SSD bundle to add more capacity.

Enable InfoSlght's Al-based cache optimization setting

Turn off deduplication on affected volumes

Turn on deduplication on affected volumes.

You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two moreSFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.Which action must be performed to finish the installation?

Order the optional 2-SFF rear drive box to house the two SFF drives

Order the optional Premium 6 SAS/SATA+2 NVMe cage to house the two SFF drives.

install the two SFF drives in the two included SFF slots in the universal Media Bay.

Give the two SFF drives to the customer to keep on-site in case of future drive failure.

Order the optional 2-SFF rear drive box to house the two SFF drives

A customer requires five HPE ProLiant servers that will be mounted in a rack and shipped from site to site All servers must be online within an hour of site arrival Which feature will ensure that the servers will be available to the business if travel motion has damaged a DIMM?

HPE Fast Fault Tolerance Memory protection

Flash Back Write Cache battery protection

HPE Active Health System integration

An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive.What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?

RDMA over Converged Ethernet (RoCE)

Open Shortest Path First (OSPF)

Priority-based Flow Control (PFC)

RDMA over Converged Ethernet (RoCE)

Multi Active Discriminator (MAD)

A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight. What should you recommend'?

Add another datastore for the RTP Nimble Datacenter

Add cache to the array for the RTP Nimble Datacenter.

increase the cache size for VMware-DS-Space-NoDeDup

increase the datastore size for VMware-DS-Space-NoDeDup.

Add another datastore for the RTP Nimble Datacenter

A customer wants to optimize the performance of its storage array by moving data residing in one class of disks to a more appropriate class of disks based on data access patterns without manual intervention.Which HPE storage technology/feature will meet the customer requirement when the data is stored on an HPE Primera storage?

Nothing needs to be done since this is part of the OS

Activate SSD read cache on volume level

Enable Automated Tiering on the Storage Pool level

HP HPE0-V15 Practice Test 2 - Free Online Exam Prep & Questions

A customer has a single ProLiant DL560 Gen 10 running a virtualization system. They want to validate installed firmware components at the hardware level.

Which built-in management tool should they use to complete this task?

Become a Premium Member for full access

Unlock Premium Member

HP HPE0-V15 Practice Test 2

Question

HP HPE0-V15 Practice Tests

Practice Tests