You are troubleshooting connectivity between an EVPN spine switch configured as a route reflector and a leaf node with an IP address of 10.30.100.6.Referring to the exhibit, what is the problem?

The spine node is not configured for the family inet NLRI.

The neighbor 10.30.100.3 statement is missing from leaf1's configuration.

The spine node is not configured for the family inet NLRI.

The neighbor 10.30.100.6 statement is missing from spine1's configuration.

The leaf node is not configured for the family evpn NLRI.

You have scheduled maintenance operations for one of the devices in your OSPF network.Referring to the exhibit, which three statements are correct? (Choose three.)

Any traffic destined for networks that terminate on R1 will still be forwarded to R1.

The metrics for all transit interfaces on R1 is set to the maximum value of 65,535.

R1 participates in OSPF routing but does not send or receive transit traffic.

R1 does not participate in OSPF routing.

Any traffic destined for networks that terminate on R1 will still be forwarded to R1.

The metrics for all transit interfaces on R1 is set to the maximum value of 65,535.

R1 participates in OSPF routing but does not send or receive transit traffic.

R1 does not send or receive transit traffic during the maintenance window even if no alternative paths exist to the given destination.

You are running OSPF as your IGP. The interfaces connecting two routers are in the ExStart state. You notice that something is incorrect with the configuration.Referring to the exhibit, which statement is correct?

The IP addresses are incorrect.

The interface type is incorrect.

The IP addresses are incorrect.

Referring to the exhibit, which two statements are correct? (Choose two.)

The DS-2 switch will be root bridge for MSTI 2.

The DS-2 switch will be root bridge for MSTI 1.

The DS-2 switch will be root bridge for MSTI 2.

The DS-1 switch will be root bridge for MSTI 1.

The DS-1 switch will be root bridge for MSTI 2.

The DS-2 switch will be root bridge for MSTI 1.

In OSPF, how does a router ensure that LSAs advertised to a neighboring router are received?

LSAs are acknowledged by the neighboring router.

LSA flooding guarantees that all routers will receive them successfully.

LSAs are sent over a TCP connection.

LSAs are acknowledged by the neighboring router.

LSAs are advertised with an acknowledgement bit.

Referring to the exhibit, which two statements are correct? (Choose two.)

BPDUs from the root bridge for VLAN 10 have been received on the ge-0/0/7.0 interface.

BPDUs from the root bridge for VLAN 20 have been received on the ge-0/0/7.0 interface.

BPDUs from the root bridge for VLAN 10 have been received on the ge-0/0/7.0 interface.

DS-1 is the root bridge for VLAN 10.

BPDUs from the root bridge for VLAN 20 have been received on the ge-0/0/7.0 interface.

Default VSTP bridge priority values are configured.

A user is attempting to watch a high-definition video being streamed from the media server over the network. However, the user complains that the experienced video quality is poor. While logged on to router B, a Juniper Networks device, you notice that video packets are being dropped.In this scenario, what would solve this problem?

Adjust the expedited-forwarding BA classifier on router B's ge-0/0/1 interface to support a higher transmit rate.

Adjust the scheduler for the expedited-forwarding forwarding class to support a higher transmit rate.

Adjust the expedited-forwarding BA classifier to router B's ge-0/0/0 interface to support a higher transmit rate.

Adjust the scheduler-map to support a higher transmit rate.

Adjust the expedited-forwarding BA classifier on router B's ge-0/0/1 interface to support a higher transmit rate.

There are two BGP routes to 10.200.200.0/24 received from two external peers. Route 1 comes from a neighbor with a router ID of 10.10.100.1 and a peer IP address of 10.10.30.1, and route 2 comes from a neighbor with a router ID of 10.10.200.1 and a peer IP address of 10.10.50.1. Both routes have the same MED value, origin value, AS path length, and local preference number.In this scenario, which statement is correct about the active route?

Route 2 will be active because of the router ID.

Route 1 will be active because of the peer IP address.

Route 2 will be active because of the peer IP address.

Route 1 will be active because of the router ID.

Route 2 will be active because of the router ID.

Referring to the exhibit, which two statements are correct? (Choose two.)

The maximum wattage that this switch can allocate to attached Ethernet devices is 100 watts.

PoE is not enabled on the ge-0/0/0 interface.

The maximum wattage that this switch can allocate to attached Ethernet devices is 100 watts.

If the total power consumption exceeds 90 watts, the ge-0/0/11 interface will continue to receive power.

PoE is not enabled on the ge-0/0/0 interface.

The ge-0/0/10 interface supports PoE+.

You are asked to establish full connectivity between all devices in the BGP network.Referring to the exhibit, which two configuration changes will allow BGP route advertisements?(Choose two.)

On R1 and R3, include the loops 2 statement at the [edit protocols bgp family inet unicast] hierarchy.

On R2, include the advertise-peer-as statement at the [edit protocols bgp group external] hierarchy.

On R2, include the loops 2 statement at the [edit protocols bgp family inet unicast] hierarchy.

On R1 and R3, include the loops 2 statement at the [edit protocols bgp family inet unicast] hierarchy.

On R1 and R3, include the advertise-peer-as statement at the [edit protocols bgp group external] hierarchy.

On R2, include the advertise-peer-as statement at the [edit protocols bgp group external] hierarchy.

Referring to the exhibit, which two statements are correct? (Choose two.)

The BGP neighbor can advertise L3 VPN related routes.

The BGP neighbor can advertise EVPN related routes.

The BGP neighbor can advertise L3 VPN related routes.

The BGP neighbor cannot advertise EVPN related routes.

The BGP neighbor can advertise EVPN related routes.

The BGP neighbor cannot advertise L3 VPN related routes.

You are deploying IP phones in your enterprise networks. When plugged in, the IP phones must be automatically provided with the correct VLAN ID needed for sending voice traffic to the EX Series switches.In this scenario, which two solutions are required to accomplish this task? (Choose two.)

Enable LLDP-MED on appropriate access interfaces.

Enable the voice VLAN feature with the appropriate access interfaces and VLAN ID for voice traffic.

Enable LLDP-MED on appropriate access interfaces.

Create two VLANs and assign them as VLAN members to the appropriate access interfaces.

Enable the voice VLAN feature with the appropriate access interfaces and VLAN ID for voice traffic.

Use LLDP on appropriate interfaces.

Referring to the exhibit, how will router E quickly learn that the remote MAC addresses are no longer reachable through the router attached to the failed link?

Router E receives Type 1 withdrawal messages from router D.

Router E receives Type 2 withdrawal messages from router D.

Router E receives Type 1 withdrawal messages from router D.

Router E receives Type 1 withdrawal messages from router C.

Router E receives Type 2 withdrawal messages from router C.

Referring to the exhibit, which statement is correct?

The route is learned from only one neighbor.

The route is learned from a multihop BGP session.

The route is learned from only one neighbor.

The route is learned from a multipath BGP session.

The route is learned from three different neighbors.

Referring to the exhibit, which statement is correct when a failure exists on the link between host2 and switch5 on this EVPN-VXLAN fabric?

The switch5 device will send a Type 3 route to all peers.

The switch5 device will send a Type 2 route to all peers.

The switch5 device will send a Type 4 route to all peers.

The switch5 device will send a Type 1 route to all peers.

The switch5 device will send a Type 3 route to all peers.

Your network is multihomed to two ISPs. The BGP sessions are established; however, the ISP peers are not receiving any routes.Which two statements are correct about troubleshooting your configuration? (Choose two.)

Verify the export policies on your router.

Verity that the multihop settings are configured on your router.

Verify the import policies on your router.

Verify that the BGP routes are active in your routing table.

Verify the export policies on your router.

Verity that the multihop settings are configured on your router.

Referring to the exhibit, you have placed the cos multifield classifier on all edge interfaces and configured the relevant CoS parameters.In this scenario, which two statements are correct? (Choose two.)

SSH traffic using the default port will be placed in the af forwarding class and accepted.

UDP traffic using the 16000 port will be placed in the voice forwarding class and accepted.

SSH traffic using the default port will be placed in the af forwarding class and accepted.

SSH traffic using the default port will be placed in the best-effort forwarding class and accepted.

UDP traffic using the 16000 port will be placed in the voice forwarding class and accepted.

UDP traffic using the 16000 port will be placed in the best-effort forwarding class and accepted.

Juniper JN0-649 Practice Test 2 - Free Online Exam Prep & Questions

Which two statements are correct regarding the behavior shown in the exhibit? (Choose two.)

Juniper JN0-649 image Question 41 51043 09182024211314000000

Become a Premium Member for full access

Unlock Premium Member

Juniper JN0-649 Practice Test 2

Question

Juniper JN0-649 Practice Tests

Practice Tests