You are deploying multiple Juniper switches al the same location. Your switches are currently using the factory-default configuration.In this scenario, which two statements are correct? (Choose two.)

The switch will try to request an IP address from a DHCP server using all interfaces that are connected and are operational.

The DHCP server configuration can provide Junos version requirements to DHCP clients.

The DHCP server configuration cannot provide Junos version requirements to DHCP clients.

The switch will try to request an IP address from a DHCP server using all interfaces that are connected and are operational.

The switch will try to request an IP address from a DHCP server using only the management interface.

The DHCP server configuration can provide Junos version requirements to DHCP clients.

As part of the onboarding process for new switches being added to your data centers, your company uses Juniper Networks' ZTP process. As part of the ZTP process, a script is executed by the devices being onboarded.Which statement is correct in this scenario?

The Junos ZTP process supports Shell. Python, and SLAX.

The Junos ZTP process supports Shell. JScript. and Ansible.

The Junos ZTP process supports Python, SLAX, and Perl.

The Junos ZTP process supports JScript. Ansible. and Perl.

The Junos ZTP process supports Shell. Python, and SLAX.

Exhibit. You are deploying a VXLAN overlay with EVPN as the control plane in an ERB architecture.Referring to the exhibit, which three statements are correct about where the VXLAN gateways will be placed? (Choose three.)

All leaf devices will have L2 VXLAN gateways.

All leaf devices will have L3 VXLAN gateways.

Spine devices will have no VXLAN gateways.

Only the spine devices will have L2 VXLAN gateways.

All leaf devices will have L2 VXLAN gateways.

All leaf devices will have L3 VXLAN gateways.

Only the border and leaf devices will have L3 VXLAN gateways.

Spine devices will have no VXLAN gateways.

You are designing an IP fabric tor a large data center, and you are concerned about growth and scalability. Which two actions would you take to address these concerns? (Choose two.)

Design a three-stage Clos IP fabric.

Use OFX5700 Series devices as the super spines.

Design a five-stage Clos IP fabric.

Design a three-stage Clos IP fabric.

Use EX4300 Series devices as the spine devices.

Use OFX5700 Series devices as the super spines.

Exhibit. Referring to the configuration shown in the exhibit, assume that there is no external router present, and that the configuration is fabric-only.Which two statements are true about the example configuration? (Choose two.)

Devices in irb.400 (vlan 400) are not able to communicate directly with devices in routing instance Customer A.

Devices in irb.400 (vlan 400) and irb.800 (vlan 800) are able to communicate over the fabric.

VNI 10006 is assigned to vlan 800 (irb.800).

Devices in irb.400 (vlan 400) are not able to communicate directly with devices in routing instance Customer A.

Devices in routing instance Customer A are able to communicate with devices in routing instance Customer B

Devices in irb.400 (vlan 400) and irb.800 (vlan 800) are able to communicate over the fabric.

Exhibit. The exhibit shows the truncated output of the show evpn database command.Given this output, which two statements are correct about the host with MAC address 40:00:dc:01:00:04? (Choose two.)

The host is assigned IP address 10.4.4.5.

The host is originating from an ESI LAG.

The host is assigned IP address 10.4.4.5.

The host is originating from irb.300.

The host is located on VN110002.

The host is originating from an ESI LAG.

Exhibit. Referring to the exhibit, Host1 (10.1.1.1) is failing to communicate with Host2 (10.1.2.1) in a data center that uses an ERB architecture. What do you determine from the output?

The traffic is entering the VXLAN tunnel.

The traffic is failing because load balancing is not configured correctly.

The traffic is entering the VXLAN tunnel.

Host1 and Host2 are directly connected to leaf1.

The irb.20 interface is not configured on leaf1.

You are deploying a Clos IP fabric with an oversubscription ratio of 3:1.In this scenario, which two statements are correct? (Choose two.)

The oversubscription ratio decreases when you add spine devices.

The oversubscription ratio increases when you remove spine devices.

The oversubscription ratio remains the same when you remove spine devices.

The oversubscription ratio decreases when you add spine devices.

The oversubscription ratio increases when you remove spine devices.

The oversubscription ratio remains the same when you add spine devices.

Exhibit. Referring to the exhibit, which statement is correct?

The MAC address is unknown and not in the forwarding table of the remote VTEP.

VNI 100 is not configured on the remote VTEP.

The MAC address is unknown and not in the forwarding table of the remote VTEP.

The remote VTEP is not responding.

The MAC address is known but not reachable by the remote VTEP

Exhibit. Referring to the exhibit, the spinel device has an underlay BGP group that is configured to peer with its neighbors' directly connected interfaces. Which two statements are true in this scenario? (Choose two.)

The multihop statement is not required to establish the underlay BGP sessions.

Load balancing for the underlay is configured correctly.

The multihop statement is not required to establish the underlay BGP sessions.

Load balancing for the underlay is not configured correctly.

The multihop statement is required to establish the underlay BGP sessions.

Load balancing for the underlay is configured correctly.

Which three statements are correct about VXLAN control planes? (Choose three.)

Both multicast and EVPN can facilitate MAC learning.

EVPN enables fast convergence and updates.

Multicast does not require as many resources.

EVPN is inefficient and does not scale well.

Both multicast and EVPN can facilitate MAC learning.

Multicast is not agile and requires manual VNI mapping.

EVPN enables fast convergence and updates.

Multicast does not require as many resources.

You are asked to set up an IP fabric that supports Al or ML workloads. You have chosen to use lossless Ethernet in this scenario, which statement is correct about congestion management?

The switch experiencing the congestion notifies the source device.

Only the source and destination devices need ECN enabled.

ECN marks packets based on WRED settings.

ECN is negotiated only among the switches that make up the IP fabric for each queue.

Exhibit. Referring to the exhibit, which statement Is true?

An ERB architecture is being used.

A PBB-EVPN architecture is being used.

An ERB architecture is being used.

An OTT architecture is being used.

A CRB architecture is being used.

Exhibit. Connections between hosts connected to Leaf-1 and Leaf-2 are not working correctly.Referring to the exhibit, which two configuration changes are required to solve the problem? (Choose two.)

Configure the set switch-options service-id 1 parameter on Leaf-2.

Configure the set switch-options vrf-target target: 65000:55 parameter on Leaf-2.

Configure the set switch-options route-distinguisher 192.168.100.51:2 parameter on Leaf-1.

Configure the set switch-options service-id 1 parameter on Leaf-2.

Configure the set switch-options vtep-source-interface 100. 0 parameter on Leaf-1.

Configure the set switch-options vrf-target target: 65000:55 parameter on Leaf-2.

Which two statements are true about a pure IP fabric? (Choose two.)

Devices in an IP fabric function as Layer 3 routers.

An IP fabric does not support Layer 2 protocols.

Devices in an IP fabric function as Layer 3 routers.

An IP fabric supports Layer 2 VLANs.

Devices in an IP fabric must be connected to a fabric controller.

An IP fabric does not support Layer 2 protocols.

Which two statements are true about IP fabrics using unnumbered BGP? (Choose two.)

Unnumbered BGP requires that family inet is configured on each interface.

Unnumbered BGP peering automatically provisions IPv4 peering.

Unnumbered BGP requires that family inet6 is configured on each interface.

Unnumbered BGP peering automatically provisions IPv6 peering.

Unnumbered BGP requires that family inet is configured on each interface.

Unnumbered BGP peering automatically provisions IPv4 peering.

You are asked to implement VXLAN group-based policies (GBPs) in your data center. Which two statements are correct in (his scenario? (Choose two.)

VXLAN GBP uses scalable group tags that may be configured on a RADIUS server and pushed to the switch through 802.1X.

VXLAN GBP ensures consistent application of security group policies throughout the network.

VXLAN GBP uses scalable group tags that must be configured statically on each switch and activated through 802.1X.

VXLAN GBP uses scalable group tags that may be configured on a RADIUS server and pushed to the switch through 802.1X.

VXLAN GBP ensures consistent application of security group policies throughout the network.

VXLAN GBP ensures consistent application of BGP groups throughout the network.

You are using E8GP peering in an underlay IP fabric. Which two statements are correct in this scenario? (Choose two.)

EBGP peering does not require an IGP protocol tor adjacency establishment.

Every leaf node has one peering session to every spine node.

EBGP peering requires an IGP protocol tor adjacency establishment.

EBGP peering does not require an IGP protocol tor adjacency establishment.

Every leaf node has one peering session to every spine node.

Every leaf node has a peering session to every other leaf node.

Which two statements are true about EVPN routes for Data Center Interconnect? (Choose two.)

Type 2 EVPN routes do not require a VXLAN tunnel to the protocol next hop.

Type 5 EVPN routes do not require a VXLAN tunnel to the protocol next hop.

Type 5 EVPN routes require a VXLAN tunnel to the protocol next hop.

Type 2 EVPN routes do not require a VXLAN tunnel to the protocol next hop.

Type 2 EVPN routes require a VXLAN tunnel to the protocol next hop.

Type 5 EVPN routes do not require a VXLAN tunnel to the protocol next hop.

Juniper JN0-683 Practice Test 2 - Free Online Exam Prep & Questions

You are preparing an sFlow monitoring system configuration.

In this scenario, what Information will be included in the datagram sent to the sFlow collector? (Choose two.)

Become a Premium Member for full access

Unlock Premium Member

Juniper JN0-683 Practice Test 2

Question

Juniper JN0-683 Practice Tests

Practice Tests