What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

It does not back up firmware images saved on FortiManager.

It supports FTP, SCP, and SFTP.

It does not back up firmware images saved on FortiManager.

It can be configured using the CLI and GUI.

It backs up all devices and the FortiGuard database.

It supports FTP, SCP, and SFTP.

In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?

By default, the unregistered FortiGate will appear in the root ADOM.

The FortiGate will be added automatically to the default ADOM named FortiGate.

The FortiGate will be automatically added to the Training ADOM.

By default, the unregistered FortiGate will appear in the root ADOM.

The FortiManager administrator must add the unregistered device manually to the unregistered device manually to the Training ADOM using the Add Device wizard

An administrator would like to create an SD-WAN using central management. What steps does the administrator need to perform to create an SD-WAN using central management?

Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.

First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route

You must specify a gateway address when you create a default static route

Remove all the interface references such as routes or policies

Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.

Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)

Does not back up firmware images saved on FortiManager

Backs up all devices and the FortiGuard database.

Does not back up firmware images saved on FortiManager

Can be configured from the CLI and GUI

An administrator has added all the devices in a Security Fabric group to FortiManager.How does the administrator identify the root FortiGate?

By an Asterisk (*) at the end of the device name

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a QUESTION NO : mark(?) at the end of the device name

By an Asterisk (*) at the end of the device name

An administrator has added all the devices in a Security Fabric group to FortiManager.How does the administrator identify the root FortiGate?

By an Asterisk (*) at the end of the device name

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a QUESTION NO : mark(?) at the end of the device name

By an Asterisk (*) at the end of the device name

What does a policy package status of Modified indicate?

The policy package was never imported after a device was registered on FortiManager

FortiManager is unable to determine the policy package status

The policy package was never imported after a device was registered on FortiManager

The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager

The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

View the following exhibit. When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

Once initiated, the install process cannot be canceled and changes will be installed on the managed device

Installs device-level changes to FortiGate without launching the Install Wizard

Once initiated, the install process cannot be canceled and changes will be installed on the managed device

Will not create new revision in the revision history

Installs device-level changes to FortiGate without launching the Install Wizard

Provides the option to preview configuration changes prior to installing them

You are moving managed FortiGate devices from one ADOM to a new ADOM.Which statement correctly describes the expected result?

The shared policy package will not be moved to the new ADOM

Any pending device settings will be installed automatically

Any unused objects from a previous ADOM are moved to the new ADOM automatically

The shared policy package will not be moved to the new ADOM

Policy packages will be imported into the new ADOM automaticallyD

In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device

Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

Which three settings are the factory default settings on FortiManager? (Choose three.)

FortiAnalyzer features are disabled

port1 interface IP address is 192.168.1.99/24

FortiAnalyzer features are disabled

Reports and Event Monitor panes are enabled

port1 interface IP address is 192.168.1.99/24

When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

An administrator run the reload failure command: diagnose test deploymanager reload config<deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.Which troubleshooting step should you take to resolve the issue?

Make sure the administrator IP address is part of the trusted hosts.

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

What are two outcomes of ADOM revisions? (Choose two.)

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current state of all policy packages and objects for an ADOM

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current size of the whole ADOM

ADOM revisions can create System Checkpoints for the FortiManager configuration

ADOM revisions can save the current state of all policy packages and objects for an ADOM

View the following exhibit. If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

When you configure an SD-WAN, you must specify at least two member interfaces.

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

An administrator wants to delete an address object that is currently referenced in a firewall policy.What can the administrator expect to happen?

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy

FortiManager will not allow the administrator to delete a referenced address object

FortiManager will disable the status of the referenced firewall policy

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy

FortiManager will replace the deleted address object with all address object in the referenced firewall policy

An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.How should the Workspace mode be configured on FortiManager?

Set to workflow and use the ADOM locking feature

Set to read/write and use the policy locking feature

Set to normal and use the policy locking feature

Set to disable and use the policy locking feature

Refer to the following exhibit: Which of the following statements are true based on this configuration? (Choose two.)

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

The same administrator can lock more than one ADOM at the same time

Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

Unlocking an ADOM will submit configuration changes automatically to the approval administrator

Unlocking an ADOM will install configuration automatically on managed devices

Refer to the exhibits.Exhibit one. Exhibit two. An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.What can be the main reason for these unset commands?

The Training system template has other default settings

The DNS addresses in the default system settings are the same as the Training system template

The Training system template has other default settings

The ADOM is locked by another administrator

The Training system template does not have assigned devices

An administrator would like to create an SD-WAN using central management in the Training ADOM.To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

Enable SD-WAN central management in the Training ADOM

Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces

Specify a gateway address when you create a default SD-WAN static route

Enable SD-WAN central management in the Training ADOM

Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings

Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces

View the following exhibit. Which statement is true regarding this failed installation log?

Policy ID 2 will not be installed

Policy ID 2 is installed without a source address

Policy ID 2 will not be installed

Policy ID 2 is installed in disabled state

Policy ID 2 is installed without a source device

Refer to the exhibit. Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

View the following exhibit. What is the purpose of setting ADOM Mode to Advanced?

This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.

The setting allows automatic updates to the policy package configuration for a managed device

The setting enables the ADOMs feature on FortiManager

This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.

The setting disables concurrent ADOM access and adds ADOM locking

An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.What can prevent an admin account that has Super_User rights over the device from approving a workflow session?

Trainer is not a part of workflow approval group

Trainer does not have full rights over this ADOM

Trainer must close Student's workflow session before approving the request

Student, who submitted the workflow session, must first self-approve the request

Refer to the exhibit. You are using the Quick Install option to install configuration changes on the managed FortiGate.Which two statements correctly describe the result? (Choose two.)

It installs device-level changes to FortiGate without launching the Install Wizard

It cannot be canceled once initiated and changes will be installed on the managed device

It will not create a new revision in the revision history

It installs device-level changes to FortiGate without launching the Install Wizard

It cannot be canceled once initiated and changes will be installed on the managed device

It provides the option to preview configuration changes prior to installing them

View the following exhibit: How will FortiManager try to get updates for antivirus and IPS?

From the list of configured override servers with ability to fall back to public FDN servers

From the configured override server list only

From the default server fdsl.fortinet.com

From public FDNI server with highest index number only

View the following exhibit. Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

View the following exhibit. An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

The unused objects that are not tied to the firewall policies will be installed on FortiGate

The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

The unused objects that are not tied to the firewall policies in policy package will be deleted from the FortiManager database

View the following exhibit, which shows the Download Import Report: Why it is failing to import firewall policy ID 2?

The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate

Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager

Policy ID 2 does not have ADOM Interface mapping configured on FortiManager

Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.

View the following exhibit: Which two statements are true if the script is executed using the Remote FortiGate Directly (via CLI) option? (Choose two.)

FortiGate will auto-update the FortiManager's device-level database.

FortiManager will create a new revision history.

You must install these changes using Install Wizard

FortiGate will auto-update the FortiManager's device-level database.

FortiManager will create a new revision history.

FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.

Refer to the exhibit. Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

The latest history for the managed FortiGate does not match with the device-level database

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed

The latest history for the managed FortiGate does not match with the device-level database

Configuration changes directly made on the FortiGate have been automatically updated to device-level database

Which two statements regarding device management on FortiManager are true? (Choose two.)

FortiGate devices in HA cluster devices are counted as a single device.

FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.

FortiGate devices in HA cluster devices are counted as a single device.

FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.

FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.

The maximum number of managed devices for each ADOM is 500.

Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

The Security Fabric settings are part of the device level settings

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration

The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices

The Security Fabric settings are part of the device level settings

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

Refer to the exhibit. Which two statements are true if the script is executed using the Device Database option? (Choose two.)

You must install these changes using the Install Wizard to a managed device

The Device Settings Status will be tagged as Modified

You must install these changes using the Install Wizard to a managed device

The successful execution of a script on the Device Database will create a new revision history

The script history will show successful installation of the script on the remote FortiGate

The Device Settings Status will be tagged as Modified

Refer to the exhibit. An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

The administrator profile does not have full access privileges like the Super_User profile.

FortiAnalyzer features are not enabled on FortiManager.

The administrator logged in using the unsecure protocol HTTP, so the view is restricted.

The administrator profile does not have full access privileges like the Super_User profile.

The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.

FortiAnalyzer features are not enabled on FortiManager.

Fortinet NSE5_FMG-7.2 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

View the following exhibit.

Fortinet NSE5_FMG-7.2 image Question 1 26474 09182024190431000000

An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package. When the install operation is performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

10.0.1.0/24

It will create firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values

192.168.0.1/24

Local-FortiGate will automatically choose an IP Network based on its network interface settings.

Comment (0)

Fortinet NSE5_FMG-7.2 Practice Test 1

Question

Fortinet NSE5_FMG-7.2 Practice Tests

Practice Tests