When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)

An X.509 to authenticate the authentication server

A WPA2 or WPA3 Enterprise wireless network

An X.509 certificate to authenticate the client

An X.509 to authenticate the authentication server

A WPA2 or WPA3 personal wireless network

A WPA2 or WPA3 Enterprise wireless network

Which statement is correct about security profiles on FortiAP devices?

Only bridge mode SSIDs can apply the security profiles

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic

Only bridge mode SSIDs can apply the security profiles

FortiGate performs inspection the wireless traffic

How are wireless clients assigned to a dynamic VLAN configured for hash mode?

Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool

Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN

Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs

Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool

Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of

A tunnel mode SSID is configured on a FortiGate wireless controller.Which task must be completed before the SSID can be used?

The wireless network interface must be assigned a Layer 3 address.

The new network must be manually assigned to a FortiAP profile.

The wireless network interface must be assigned a Layer 3 address.

Security Fabric and HTTPS must be enabled on the wireless network interface.

The wireless network to Internet firewall policy must be configured.

When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)

Short message service authentication

Software security token authentication

Short message service authentication

Hardware security token authentication

Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.Which configuration would enable the most reliable wireless connectivity for the remote clients?

Configure a bridge mode wireless network and enable the Local standalone configuration option

Configure a tunnel mode wireless network and enable split tunneling to the local network

Configure a bridge mode wireless network and enable the Local standalone configuration option

Configure a bridge mode wireless network and enable the Local authentication configuration option

Install supported FortiAP and configure a bridge mode wireless network

Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?

Two wireless APs must be sending data

DTLS encryption on wireless traffic must be turned off

Wireless network security must be set to open

Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

Which factor is the best indicator of wireless client connection quality?

Upstream link rate, the connection rate for the client to the AP

Downstream link rate, the connection rate for the AP to the client

The receive signal strength (RSS) of the client at the AP

Upstream link rate, the connection rate for the client to the AP

The channel utilization of the channel the client is using

When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)

When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

Refer to the exhibits.Exhibit A Exhibit B Exhibit C A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and Io devices.Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

Enable frequency handoff on the AP to band steer clients

Increase the transmission power of the AP radios

Enable frequency handoff on the AP to band steer clients

Reduce the number of wireless networks being broadcast by the AP

Install another AP in the reception area to improve available bandwidth

Which two statements about background rogue scanning are correct? (Choose two.)

A dedicated radio configured for background scanning can support the connection of wireless clients

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can support the connection of wireless clients

When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band

Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)

A VAP configured for WPA2 or 3 Enterprise

A VAP configured to authenticate using a radius server

A VAP configured for captive portal authentication

A VAP configured for WPA2 or 3 Enterprise

A VAP configured to authenticate locally on FortiGate

A VAP configured to authenticate using a radius server

Where in the controller interface can you find a wireless client's upstream and downstream link rates?

On the AP CLI, using the cw_diag ksta command

On the controller CLI, using the diag wireless-controller wlac -d sta command

On the AP CLI, using the cw_diag -d sta command

On the controller CLI, using the WiFi Client monitor

You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.Which configuration change will allow neighboring APs to be successfully detected?

Enable Radio resource provisioning on the relevant AP profiles.

Enable Locate WiFi clients when not connected in the relevant AP profiles.

Enable Monitor channel utilization on the relevant AP profiles.

Ensure that all allowed channels are enabled for the AP radios.

Enable Radio resource provisioning on the relevant AP profiles.

Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

Gathering details about on site visitors

Comparing current data with historical records

Gathering details about on site visitors

Predicting the number of guest users visiting on-site

Comparing current data with historical records

Reporting potential threats by guests on site

As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

Set the wireless controller country setting

Create wireless LAN specific policies

Set the wireless controller country setting

As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?

Create a new FortiAP profile and change the county code settings on the profile

Configure the APs individually by overriding the settings in Managed FortiAPs

Configure the controller for the correct country code for Germany

Clone a suitable FortiAP profile and change the county code settings on the profile

Create a new FortiAP profile and change the county code settings on the profile

Refer to the exhibits.Exhibit A Exhibit B A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be ''Authors''

For both interfaces in the wtp-profile, configure vap-all to be manual

For both interfaces in the wtp-profile, configure set vaps to be ''Authors''

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

A tunnel mode wireless network is configured on a FortiGate wireless controller.Which task must be completed before the wireless network can be used?

The wireless network to Internet firewall policy must be configured

The wireless network interface must be assigned a Layer 3 address

Security Fabric and HTTPS must be enabled on the wireless network interface

The wireless network to Internet firewall policy must be configured

The new network must be manually assigned to a FortiAP profile.

How can you find upstream and downstream link rates of a wireless client using FortiGate?

On the FortiGate GUI, using the WiFi Client monitor

On the FortiAP CLI, using the cw_diag ksta command

On the FortiAP CLI, using the cw_diag -d sta command

On the FortiGate GUI, using the WiFi Client monitor

On the FortiGate CLI, using the diag wireless-controller wlac -d Sta command

Which statement is correct about security profiles on FortiAP devices?

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.

Security profiles can only be applied to unencrypted wireless traffic.

Security profiles can only be applied via firewall policies on the FortiGate.

Security profiles are only supported on Bridge-mode SSIDs.

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.

Refer to the exhibit. If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

Areas with the signal strength equal or stronger than -68 dB are highlighted in green circles.

Areas with the signal strength weaker than -68 dB are shown with black background.

Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility.

Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APS.

Areas with the signal strength equal or stronger than -68 dB are highlighted in green circles.

Which statement is correct about security profiles on FortiAP devices?

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.

Security profiles are only supported on Bridge-mode SSIDs.

Security profiles can only be applied via firewall policies on the FortiGate.

Security profiles can only be applied to unencrypted wireless traffic.

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.

Which statement describes FortiPresence location map functionality?

Provides real-time insight into user movements

Provides real-time insight into user online activity

Provides real-time insight into user purchase activity

Provides real-time insight into user usage stats

Refer to the exhibit. If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor

Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility

Areas with the signal strength weaker than -68 dB are cut out of the map

Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor

Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.

Refer to the exhibits.Exhibit A Exhibit B The exhibits show the diagnose debug log of a station connection taken on the controller CLI.Which security mode is used by the wireless connection?

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

Fortinet NSE6_FWF-6.4 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 35

Refer to the exhibit.

Fortinet NSE6_FWF-6.4 image Question 1 133281 12222024234406000000

What does the asterisk (*) symbol beside the channel mean?

Indicates channels that can be used only when Radio Resource Provisioning is enabled

Indicates channels that cannot be used because of regulatory channel restrictions

Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)

Indicates channels that are subject to dynamic frequency selection (DFS) regulations

Comment (0)

Fortinet NSE6_FWF-6.4 Practice Test 1

Question

Fortinet NSE6_FWF-6.4 Practice Tests

Practice Tests