Which two statements about PCIe are true? (Choose two.)

The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.

A link that is composed of four lanes is called an x4 link.

The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.

You can install a PCI Express x8 adapter into an x4 slot.

The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.

The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.

A link that is composed of four lanes is called an x4 link.

Which three statements about FCoE are true? (Choose three.)

Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.

Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.

Consolidates I/O traffic in the data center.

Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.

Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.

Increases capital costs due to the difficulty to manage.

Consolidates I/O traffic in the data center.

Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?

SFP+ Ethernet transceiver cable

Where do you find the model number of a Cisco MDS 9200 Series chassis?

on the top front of the chassis next to the Cisco logo

on the top front of the chassis next to the serial number

on the bottom front of the chassis next to the Cisco logo

on the top front of the chassis next to the Cisco logo

on the bottom front of the chassis next to the serial number

Refer to the exhibit. Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?A. A is power button and power status LED;B is identification button and LED;C is system status LED;D is network link activity LED.

A is network link activity LED;B is system status LED;C is power button and power status LED;D is identification button and LED.

A is system status LED;B is network link activity LED;C is power button and power status LED;D is identification button and LED.

A is network link activity LED;B is system status LED;C is identification button and LED;D is power button and power status LED.

Which processor option is supported in the Cisco UCS C420 M3 Server?

up to four Intel Xeon E5-4600 series multicore processors

up to two Intel Xeon E5-4600 series multicore processors

up to two Intel Xeon E7-4800 series multicore processors

up to four Intel Xeon E5-4600 series multicore processors

two or four Intel Xeon E7-8800 series multicore processors

Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)

Virtual Memory Controller Module

Refer to the exhibit. What is the name of this rack-mount server?

Cisco UCS C420 Rack-Mount Server

Cisco UCS C220 Rack-Mount Server

Cisco UCS C240 Rack-Mount Server

Cisco UCS C420 Rack-Mount Server

Cisco UCS C460 Rack-Mount Server

Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?

second-generation supervisor enhanced module (Sup2E)

first-generation supervisor module

second-generation supervisor module (Sup2)

second-generation supervisor enhanced module (Sup2E)

third-generation supervisor enhanced module (Sup3E)

Refer to the exhibit. Which item does A represent?

mLOM for Cisco UCS B420 M3 Blade Servers

Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers

Virtual Interface Card for Cisco UCS B420 M3 Blade Servers

mLOM for Cisco UCS B420 M3 Blade Servers

Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers

SuperCap module for Cisco UCS B420 M3 Blade Servers

Refer to the exhibit. Which call-out accurately shows the current running version of the Cisco UCS Manager management software?

A - UCS Manager running version 1.4(1m)

B - IO Module 1 running version 1.4(1m)

C - Interface Card 1 running version 1.4(1m)

D - Kernel running version 4.2(1)N(1.4m)

Which command saves the active configuration to NVRAM?

copy running-config startup-config

copy startup-config running-config

copy active-config backup-config

copy running-config startup-config

copy backup-config active-config

Refer to the exhibit. Where is the best place to see the power supply status of the blade server enclosure?

E - Fabric Interconnects A - PSUs

Which three options are the minimum browser requirements to log into the Cisco CIMC GUI? (Choose three.)

Adobe Flash Player 10 or higher

Adobe Shockwave Player 11 or higher

Which tool does a network administrator not need when installing hardware?

soldering iron with grounded tip

Cisco 010-151 Practice Test 1 - Free Online Exam Questions 1-40

Which method is a TCP/IP-based protocol for establishing and managing connections between IP-based storage devices, hosts, and clients?

FCIP

iFCP

iSCSI

FCoE

Comment (0)

Cisco 010-151 Practice Test 1

Question

Drag and Drop

Hot Area

Cisco 010-151 Practice Tests

Practice Tests