What is the correct path to verify the Overall Status of Chassis 1 | Server 3?

Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab

Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab

Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab

Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab

Servers Tab > Chassis > Server 3 General tab

Status Tab > Chassis > Chassis 1 > Servers > Server 3

Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab

If the Overall Status for a Cisco UCS B-Series Blade Server indicates a failure in the Cisco UCS Manager, such as discovery-failed, which statement is true?

The endpoints on that server cannot be upgraded.

The server automatically reboots reboot in 3 minutes.

The endpoints on that server cannot be upgraded.

The server is online, but the administrator cannot assign a service profile to that blade.

Which action should the administrator take before physically removing a blade server for maintenance or replacement?

Disassociate the service profile.

Perform a graceful shutdown of the server.

Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true? (Choose three.)

Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode.

Green indicates that the server is in main power mode and can be safely powered off.

Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which isindicated by an amber power status LED.

Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode.

Green indicates that the server is in main power mode and can be safely powered off.

Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which isindicated by an amber power status LED.

Disconnect the power cords from the power supplies in your server to completely power off the server.

Only an emergency shutdown can be performed using the power button on the server front panel.

The Cisco UCS C-Series Rack-Mount Server has only one power mode.

Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)

In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.

In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).

In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.

Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.

In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).

If the memory in a server is not fully populated, you can install DIMMs in any open slot.

Which three tools are necessary to console into a Cisco UCS C-Series Rack-Mount Server? (Choose three.)

Cisco DB-9-to-RJ-45 console cable

After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.Which four options should be verified? (Choose four.)

Verify the power source to the equipment.

Reseat the DIMMs, CPU, and PCI cards.

Verify that power supplies are receiving power.

Check the CPU sockets for bent pins.

Verify the power source to the equipment.

Reseat the DIMMs, CPU, and PCI cards.

Verify that power supplies are receiving power.

Reseat the mezzanine card connector.

Check the CPU sockets for bent pins.

Check the Cisco IMC for fan faults.

Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)

Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.

Reseat the blade in the same slot in the chassis.

Move the blade to another slot in the chassis.

Decommission and acknowledge the blade.

Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.

Check the CPU sockets for bent pins.

Reseat the blade in the same slot in the chassis.

Move the blade to another slot in the chassis.

Refer to the exhibit. This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool.Which types of Cisco UCS servers and Intel Xeon processors do these tools support?

Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Seriesprocessors

Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors

Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors

Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Seriesprocessors

Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Seriesprocessors

Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.)

Its power supplies and fan trays are hot-swappable.

It is offered in a one-rack-unit form factor.

It supports up to 96 10G BASE-T ports.

Which device provides analysis of Fibre Channel traffic without any network disruption?

Cisco MDS 9000 Port Analyzer Adapter

Cisco MDS 9000 Data Analyzer Adapter

Cisco MDS 9000 Port Analyzer Adapter

Cisco MDS 9000 Channel Analyzer Device

Cisco MDS 9000 Channel Analyzer Adapter

Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.)

Check that the front I/O dongle is properly seated.

Check the front I/O cable connection to the motherboard.

Check for memory subsystem failure.

Check that the front I/O dongle is properly seated.

Check the front I/O cable connection to the motherboard.

Check for memory subsystem failure.

Verify the power source to equipment.

Reseat the DIMMs, CPU, and PCI cards.

Which two specialized tools do you need to service a UCS product? (Choose two.)

KVM Console to USB 2.0 Portable Laptop Crash Cart

Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?

VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225

VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280

VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC

M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240

VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225

To confirm the installation of a B-Series Server, which GUI based management tool will be used?

CIMC (Cisco Integrated Management Controller)

Refer to the exhibit. Which item does C represent?

Favorite Icon (make any specific work pane in the application as your favorite)

Pin icon (prevents Navigation pane from sliding)

Icon to view the Navigation pane

Favorite Icon (make any specific work pane in the application as your favorite)

Index Icon (view listing in alphabetical order)

What is Platform as a Service?

It is the software development framework and components delivered over the network on a pay-as-you-go basis.

It configures, manages and develops networking environment for your application.

It is when an application service is delivered over the network on a subscription basis.

It is where servers and virtual machines (VMs), network and storage are delivered over the network on a pay-as-you-go basis.

It is the software development framework and components delivered over the network on a pay-as-you-go basis.

Which statement is true about cloud computing?

It provides end-to-end server, application network service, and storage virtualization.

It provides self-service, on-demand provisioning and a billing for corporate usage only.

Users usually own and maintain their own IT infrastructure and facility.

It provides end-to-end server, application network service, and storage virtualization.

It increases total cost of ownership.

Cisco 010-151 Practice Test 2 - Free Online Exam Prep & Questions

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

Cisco 010-151 Practice Test 2

Question

Cisco 010-151 Practice Tests

Practice Tests