A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a NetScaler_________deployed_________. (Choose the correct option to complete sentence.)

SDX; with less than 6 partitions and dedicated management interface

CPX; as part of a high availability pair

SDX; with less than 6 partitions and dedicated management interface

MPX; as part of the cluster but Cluster IP is NOT configured

SDX; with no partitions as a stand alone device

Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a NetScaler design project. They captured the following requirements from this design discussion:A pair of NetScaler MPX appliances will be deployed in the DMZ network.High Availability will be accessible in the NetScaler MPX in the DMZ Network.Load balancing should be performed for the internal network services like Microsoft Exchange Client Access Services and Microsoft App-V.The load balancing should be performed for StoreFront.The NetScaler Gateway virtual server will be utilizing the StoreFront load-balancing virtual server.The NetScaler Gateway virtual server and StoreFront.The NetScaler Gateway virtual service and StoreFront and load-balancing services are publicly accessible.The traffic for internal and external services must be isolated.Click the Exhibit button to review the logical network diagram. Which two design decisions are incorrect based on these requirements? (Choose two.)

LB StoreFront bound to traffic Domain 0

NetScaler Gateway VIP bound to Traffic Domain 1

LB StoreFront bound to traffic Domain 0

NetScaler Gateway VIP bound to Traffic Domain 1

LB APP-V bound to Traffic Domain 1

SNIP 192.168.20.2 bound to Traffic Domain 1

Scenario: A Citrix Architect needs to deploy SAML integration between NetScaler (Identity Provider) and ShareFile (Service Provider). The design requirements for SAML setup are as follows:NetScaler must be deployed as the Identity Provider (IDP).ShareFile server must be deployed as the SAML Service Provider (SP).The users in domain workspacelab.com must be able to perform Single Sign-on to ShareFile after authenticating at the NetScaler.The User ID must be UserPrincipalName.The User ID and Password must be evaluated by NetScaler against the Active Directory servers SFO-ADS-001 and SFO-ADS-002.After successful authentication, NetScaler creates a SAML Assertion and passes it back to ShareFile.Single Sign-on must be performed.SHA 1 algorithm must be utilized.The verification environment details are as follows:Domain Name: workspacelab.comNetScaler AAA virtual server URL https://auth.workspacelab.comShareFile URL https://sharefile.workspacelab.comWhich SAML IDP action will meet the design requirements?

add authentication samIIdPProfile SAMI-IDP --samISPCertName Cert_1 --samIIdPCertName Cert_2 --assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs'' --samIIssuerName auth.workspacelab.com --signatureAlg RSA-SHA1-digestMethod SHA1 --encryptAssertion ON --serviceProviderID sharefile.workspacelab.com

add authentication samIIdPProfile SAMI-IDP --samISPCertName Cert_1 --samIIdPCertName Cert_2 --assertionConsimerServiceURL ''https://auth.workspacelab.com/samIIssueName auth.workspacelab.com -signatureAlg RSA-SHA256-digestMethod SHA256-encryptAssertion ON -serviceProviderUD sharefile.workspacelad.com

add authentication samIIdPProfile SAMI-IDP --samISPCertName Cert_1 --samIIdPCertName Cert_2 --assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs'' --samIIssuerName sharefile.workspacelab.com --signatureAlg RSA-SHA256 --digestMethod SHA256 --serviceProviderID sharefile.workspacelab.com

add authentication samIIdPProfile SAMI-IDP --samISPCertName Cert_1 --samIIdPCertName Cert_2 --assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs'' --samIIssuerName auth.workspacelab.com --signatureAlg RSA-SHA1-digestMethod SHA1 --encryptAssertion ON --serviceProviderID sharefile.workspacelab.com

add authentication samIIdPProfile SAMI-IDP --samISPCertName Cert_1 --samIIdPCertName Cert_2 --assertionConsimerServiceURL https://sharefile.workspacelab.com/saml/acs'' --samIIssuerName sharefile.workspacelab.com --signatureAlg RSA-SHA1 --digestMethod SHA1 --encryptAssertion ON --serviceProviderID sharefile.workspacelab.com

What can help a Citrix Architect prepare to discuss time scales and resource requirements?

Creating a high-level project plan.

Meeting with each member of the project team to assign tasks.

Setting expectations with the project's key stakeholders.

Identifying challenges associated with the project.

Scenario: A Citrix Architect holds a design discussion with a team of Workspacelab members, and they capture the following requirements for the NetScaler design project.A pair of NetScaler MPX appliances will be deployed in the DMZ network and another pair in the internal network.High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.Multi-factor authentication must be configured for the NetScaler Gateway virtual server.The NetScaler Gateway virtual server is integrated with the StoreFront server.Load balancing must be deployed for users from the workspacelab.com domain.The workspacelab users should be authenticated using Cert Policy and LDAP.All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.Single Sign-on must be performed between StoreFront and NetScaler Gateway.After deployment, the architect observes that LDAP authentication is failing.Click the Exhibit button to review the output of aaad debug and the configuration of the authentication policy.Exhibit 1 Exhibit 2 What is causing this issue?

UserNamefield is set as subjection

User does NOT exist in database

IdapLoginName is set as sAMAccountName

Scenario: A Citrix Architect has configured NetScaler Gateway integration with a XenApp environment to provide access to users from two domains: vendorlab.com and workslab.com. The Authentication method used is LDAP.Which two steps are required to achieve Single Sign-on StoreFront using a single store? (Choose two.)

Do NOT configure SSO Name attribute in LDAP Profile.

Configure SSO Name attribute to 'userPrincipalName' in LDAP Profile.

Configure Single sign-on domain in Session profile 'userPrincipalName'.

Do NOT configure SSO Name attribute in LDAP Profile.

Do NOT configure sign-on domain in Session Profile.

Configure SSO Name attribute to 'userPrincipalName' in LDAP Profile.

Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version 12.0.53.13 nc.The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.The following are the requirements that were discussed during the project initiation call:NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.Configuration on the new MPX devices should be identical to MPX 11500 devices.Configuration changes after the deployment and initial setup should be optimized using NMAS.NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.As per the requirement from the Workspacelab team, NMAS should be store the audited data for only 15 days.Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?

Under Configuration Management; Configuration Audit and Advice should be used prior to deployment.

Under Stylebooks; Inbuilt and composite stylebook templates should be utilized prior to deployment.

Under Stylebooks; Public and composite stylebook templates should be utilized prior to deployment.

Under Configuration Management; Configuration Audit and Advice should be used prior to deployment.

Under Configuration jobs; Configuration Audit and Advice should be used prior to deployment.

Scenario: A Citrix Architect needs to assess a NetScaler Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The NetScaler Gateway needs to use ICA proxy to provide access to a XenApp and XenDesktop environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.Click the Exhibit button to view the troubleshooting details collected by the customer. What is the cause of this issue?

The Secure Ticket Authority (STA) servers are load balanced on the NetScaler.

The required ports have NOT been opened on the firewall between the NetScaler gateway and the Virtual Delivery Agent (VDA) machines.

The StoreFront URL configured in the NetScaler gateway session profile is incorrect.

The Citrix License Server is NOT reachable.

The Secure Ticket Authority (STA) servers are load balanced on the NetScaler.

Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.Organizational details and requirements are as follows:Active XenApp and XenDesktop Service subscriptionNo existing NetScaler deploymentGlobal Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.Click the Exhibit button to view the conceptual environment architecture. The architect should use _____ in Location A, and should use ________ in Location B. (Choose the correct option to complete the sentence.)

NetScaler ADC (BYO); No NetScaler products

NetScaler ADC (BYO); NetScaler gateway appliance

NetScaler ADC (BYO); No NetScaler products

NetScaler ADC (BYO); NetScaler ADC (BYO)

NetScaler Gateway appliance; NetScaler Gateway appliance

NetScaler Gateway appliance; NetScaler ADC (BYO)

Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.Organizational details and requirements are as follows:Active XenApp and XenDesktop Service subscriptionNo existing NetScaler deploymentAbout 3,000 remote users are expected to regularly access the environmentMulti-factor authentication should be used for all external connectionsSolution must provide load balancing for backend application serversLoad-balancing services must be in Location BClick the Exhibit button to view the conceptual environment architecture. The architect should use ________ in Location A, and should use _________ in Location B. (Choose the correct option to complete the sentence.)

Citrix Gateway as a Service, Citrix ADC (BYO)

Citrix Gateway as a Service, no NetScaler products

No Citrix products, Citrix ADC (BYO)

Citrix Gateway as a Service, Citrix ADC (BYO)

No Citrix products, Citrix ICA Proxy (cloud-licensed)

Citrix Gateway as a Service, Citrix ICA Proxy (cloud-licensed)

No Citrix products; Citrix Gateway appliance

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.They captured the following requirements during the design discussion held for a Citrix ADC design project:All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configurations and design.Both external and internal NetScaler MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.GSLB should resolve both A and AAA DNS queries.In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.On the internal NetScaler, both the front-end VIP and backend SNIP will be part of the same subnet.The external NetScaler will act as default gateway for the backend servers.All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.Which design decision must the architect make the design requirements above?

The Internal NetScaler must be deployed in Transparent mode.

MAC-based Forwarding must be enabled on the External NetScaler Pair.

NSIP of the External NetScaler must be configured as the default gateway on the backend servers.

The Internal NetScaler must be deployed in Transparent mode.

The ADNS service must be configured with an IPv6 address.

Scenario: A Citrix Architect has met with a team of Workspacelab members for a design discussion. They have captured the following requirements for NetScaler design project:The authentication must be deployed for the users from the workspacelab.com and vendorlab.com domains.The workspacelab users connecting from the internal (workspacelab) network should be authenticated using LDAP.The workspacelab users connecting from the external network should be authenticated using LDAP and RADIUS.The vendorlab users should be authenticated using Active Directory Federation Service.The user credentials must NOT be shared between workspacelab and vendorlab.Single Sign-on must be performed between StoreFront and NetScaler Gateway.A domain drop down list must be provided if the used connects to the NetScaler gateway virtual server externally.Which method must the architect utilize for user management between the two domains?

Create a global catalog containing the objects of Vendorlab and Workspacelab domains.

Create shadow accounts for the users of the Workspacelab domain in the Vendorlab domain.

Create a global catalog containing the objects of Vendorlab and Workspacelab domains.

Create shadow accounts for the Vendorlab domain in the Workspacelab domain.

Create a two-way trust between the Vendorlab and Workspacelab domains.

Which parameter must a Citrix Architect configure to ensure that HDX Proxy Connection terminates upon AAA Session TimeOut?

ICA session timeout in Citrix ADC Gateway Session Profile.

ICA session timeout in VPN parameters

Connection timeout(mins) in Citrix ADC gateway Session Profile.

Connection timeout(mins) in VPN Parameters

ICA session timeout in Citrix ADC Gateway Session Profile.

Which three methods can a Citrix Architect use to assess the capabilities of a network infrastructure? (Choose three.)

Review existing monitoring solutions for periods of latency, lost packets, and insufficient bandwidth.

Map the location of the users against the existing network topology.

Examine the topology for single points of failure and potential bottlenecks.

Review existing monitoring solutions for periods of latency, lost packets, and insufficient bandwidth.

Map the location of the users against the existing network topology.

Alter firewall rules of existing network to fit into the new NetScaler Deployment.

Examine the topology for single points of failure and potential bottlenecks.

Ensure that users and computers are in the correct organizational units (OUs).

Scenario: A Citrix Architect needs to assess an existing NetScaler multi-site deployment. The deployment is using Global Server Load Balancing (GSLB) configured in a parent-child configuration.Click the Exhibit button to view the diagram of the current GSLB configuration and parent-child relationships, as well as the status of the sites and the connectivity between them. Based on the displayed configuration and status, Child_site1_______ a connection from _______. (Choose the correct option to complete the sentence.)

accepts; SiteP2; becomes its child site

rejects; SiteP2 and SiteP3; remains a child site of SiteP1

rejects; SiteP3; remains a child site of SiteP1

accepts; SiteP3; becomes its child site

accepts; SiteP2; becomes its child site

does NOT receive; SiteP2 and SiteP3; remains a child site of SiteP1

rejects; SiteP2; remains a child site of SiteP1

Scenario: The following NetScaler environment requirements were discussed during a design meeting between a Citrix Architect and the Workspacelab team:All traffic should be secured, and any traffic coming into HTTP should be redirected to HTTPS.Single Sign-on should be created for Microsoft Outlook web access (OWA).NetScaler should recognize Uniform Resource Identifier (URI) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.Users should be able to authenticate using user principal name (UPN).The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL.Which method can the architect use to redirect the user accessing https://mail.citrix.com to https://mail.citrix.com?

add lb server test SSL 10.107.149.243.443 --persistenceType NONE -cltTimeout 180 -redirectFromPort 80 -httpsRedirectUrl https://mail.citrix.com

add responder action act redirect ''https://mail.citrix.com'' -responseStatusCode 302 add responder policy pol HTTP.REQ.IS_VALID act

add lb server test SSL 10.107.149.243.80 -persistenceType NONE -cltTimeout 180 -redirectFromPort 80 -httpsRedirectUrl https://mail.citrix.com

add lb server test SSL 10.107.149.243.443 --persistenceType NONE -cltTimeout 180 -redirectFromPort 80 -httpsRedirectUrl https://mail.citrix.com

add responder action act redirect ''\https://\ + HTTP REQ.HOSTNAME. HTTP_URL_SAFE + HTTP.REQ.URL_PATH_AND_QUERY.HTTP_URL_SAFE\n\n'' -responseStatusCode 302 add responder policy pol HTTP.REQ.IS_VALID act

Scenario: A Citrix Architect and a team of Workspacelab members have met for a design discussion about the NetScaler Design Project. They captured the following requirements:Two pairs of NetScaler MPX appliances will be deployed in the DMZ network and the internal network.High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.Multi-factor authentication must be configured for the NetScaler Gateway virtual server.The NetScaler Gateway virtual server is integrated with XenApp/XenDesktop environment.Load balancing must be deployed for the users from the workspacelab.com and vendorlab.com domains.The logon page must show the workspacelab logo.Certificate verification must be performed to identify and extract the username.The client certificate must have UserPrincipalName as a subject.All the managed workstations for the workspace users must have a client identifications certificate installed on it.The workspacelab users connecting from a managed workstation with a client certificate on it should be authenticated using LDAP.The workspacelab users connecting from a workstation without a client certificate should be authenticated using LDAP and RADIUS.The vendorlab users should be authenticated using Active Directory Federation Service.The user credentials must NOT be shared between workspacelab and vendorlab.Single Sign-on must be performed between StoreFront and NetScaler Gateway.A domain drop down list must be provided if the user connects to the NetScaler Gateway virtual server externally.The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.On performing the deployment, the architect observes that users are always prompted with two-factor authentication when trying to assess externally from an unmanaged workstation.Click the exhibit button to view the configuration. What should the architect do to correct this configuration?

Bind the Default LoginSchema Policy as Domaindropdown.

Unbind LoginSchema Policy LDAP_RADIUS from the virtual server.

Bind the Portal theme as Domaindropdown.

Bind the LoginSchema Policy Domaindropdown to priority 90.

Bind the Default LoginSchema Policy as Domaindropdown.

A Citrix Architect needs to configure advanced features of NetScaler by using StyleBooks as a resource in the Heat service.What is the correct sequence of tasks to be completed for configuring NetScaler using the Heat stack?

1. Install NetScaler Bundle for OpenStack2. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource3. Register OpenStack with NMAS4. Deploy the Heat stack5. Add NetScaler instances (Optional)6. Create service packages (Add OpenStack tenants)

1. Install NetScaler Bundle for OpenStack2. Deploy the Heat stack3. Register OpenStack with NMAS4. Add NetScaler instances (Optional)5. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource6. Create service packages (Add OpenStack tenants)

1. Install NetScaler Bundle for OpenStack2. Register OpenStack with NMAS3. Add NetScaler instances (Optional)4. Create service packages (Add OpenStack tenants)5. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource6. Deploy the Heat stack

1. Install NetScaler Bundle for OpenStack2. Add NetScaler instances (Optional)3. Create service packages (Add OpenStack tenants)4. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource5. Register OpenStack with NMAS6. Deploy the Heat stack

1. Install NetScaler Bundle for OpenStack2. Prepare the HOT by using the NetScaler heat resources and NetScaler Network Resource3. Register OpenStack with NMAS4. Deploy the Heat stack5. Add NetScaler instances (Optional)6. Create service packages (Add OpenStack tenants)

Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.Organizational details and requirements are as follows:Active XenApp and XenDesktop Service subscriptionNo existing NetScaler deploymentMinimization of additional costsAll users should correct directly to the resource locations containing the servers which will host HDX sessionsClick the Exhibit button to view the conceptual environment architecture. The architect should use___________ in Location A, and should use _______________ in Location B. (Choose the correct option to complete the sentence.)

NetScaler Gateway as a Service; no NetScaler products

No NetScaler products; NetScaler ICA Proxy (cloud-licensed)

NetScaler Gateway as a Service; NetScaler ICA Proxy (cloud-licensed)

NetScaler Gateway as a Service; no NetScaler products

No NetScaler products; NetScaler Gateway appliance

NetScaler gateway as a Service; NetScaler ADC (BYO)

Citrix 1Y0-440 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

A Citrix Architect has deployed NetScaler Management and Analytics System (NMAS) to monitor a high availability pair of NetScaler VPX devices.

The architect needs to deploy automated configuration backup to meet the following requirements:

The configuration backup file must be protected using a password.

The configuration backup must be performed each day at 8:00 AM GMT.

The configuration backup must also be performed if any changes are made in the ns.conf file.

Once the transfer is successful, auto-delete the configuration file from the NMAS.

Which SNMP trap will trigger the configuration file backup?

netScalerConfigSave

sysTotSaveConfigs

netScalerConfigChange

sysconfigSave

Comment (0)

Citrix 1Y0-440 Practice Test 1

Question

Citrix 1Y0-440 Practice Tests

Practice Tests