Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?

Determines whether the NetScaler appliance will allow or deny access to content for which there is no specific authorization policy

Determines the default logging level

Determines whether the NetScaler appliance will allow or deny access to content for which there is no specific authorization policy

Determines the default period after which the user is automatically disconnected and must authenticate again to access the intranet

Determines whether the NetScaler appliance will log users onto all web applications automatically after they authenticate or will pass users to the web application logon page to authenticate for each application.

Controls are amount of time the users can be idle before they are automatically disconnected.

Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.The following requirements were discussed during the implementation:All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configurationAll traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.Single Sign-on should be created for Microsoft Outlook web access (OWA).NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSLWhich monitor will meet these requirements?

add lb monitor mon_rpc HTTP-ECV --send ''GET/rpc/healthcheck.htm'' recv 200 -LRTM DISABLED --secure YES

add lb monitor mon_rpc HTTP-ECV --send ''GET /rpc/healthcheck.htm'' recv 200 -LRTM DISABLED

add lb monitor mon_rpc HTTP-ECV --send ''GET /rpc/healthcheck.htm'' recv 200 -LRTM ENABLED

add lb monitor mon_rpc HTTP --send ''GET /rpc/healthcheck.htm'' recv 200 -LRTM DISABLED --secure YES

add lb monitor mon_rpc HTTP-ECV --send ''GET/rpc/healthcheck.htm'' recv 200 -LRTM DISABLED --secure YES

Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment for a customer. During the design discussions, the architect learns that the customer would like to allow external RDP connections to internal Windows machines but does NOT want client drive redirection enabled on these connections.Where should the architect enable the options to allow the customer to complete their requirement?

NetScaler Gateway global settings

Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.The following requirements were discussed during the design requirements phase:The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.What should the architect configure with Link Load balancing (LLB) to meet this requirement?

Mac-based forwarding option enabled.

Scenario: A Citrix Architect needs to configure a full VPN session profile to meet the following requirements:Users should be able to send the traffic only for the allowed networks through the VPN tunnel.Only the DNS requests ending with the configured DNS suffix workspacelab.com must be sent to NetScaler Gateway.If the DNS query does NOT contain a domain name, then DNS requests must be sent to NetScaler gateway.Which settings will meet these requirements?

Split Tunnel to ON, Split DNS Remote

Split Tunnel to OFF, Split DNS Both

Split Tunnel to ON, Split DNS Local

Split Tunnel to OFF, Split DNS Remote

Split Tunnel to ON, Split DNS Remote

Under which two circumstances will a service be taken out of the slow start phase with automated slow start? (Choose two.)

The service does NOT receive traffic for three successive increment intervals.

The actual request rate is slower than the new service request rate.

The service does NOT receive traffic for three successive increment intervals.

The server request rate parameters are set above 25 requests per second.

The actual request rate is slower than the new service request rate.

The percentage of traffic that the new service must receive is greater or equal to 50.

The request rate has been incremented 100 times.

Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version 12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:The NetScaler MPX device:should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.needs to protect backend servers from overloading.needs to queue all the incoming requests on the virtual server level instead of the service level.should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies.should provide flexibility to enforce the decided level of security check inspections for the requests originating from a specific geolocation database.should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote (''); backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.Which security feature should the architect configure to meet these requirements?

Geolocation-based blocking using Application Firewall

Global Server Load balancing with Dynamic RTT

Global Server Load Balancing with DNS views

Geolocation-based blocking using Application Firewall

geolocation-based blocking using Responder policies

Global Server Load Balancing with Mac Based Forwarding

Scenario: A Citrix Architect has deployed Authentication for the SharePoint server through NetScaler. In order to ensure that users are able to edit or upload documents, the architect has configured persistent cookies on the NetScaler profile.Which action should the architect take to ensure that cookies are shared between the browser and non-browser applications?

The SharePoint load-balancing VIP FQDN and the AAA VIP FQDN should be in the trusted site of the client browser.

The time zone should be the same on the NetScaler, client, and SharePoint server.

The SharePoint load-balancing VIP FQDN and the AAA VIP FQDN should be in the trusted site of the client browser.

The Secure flag must be enabled on the cookie.

The cookie type should be HttpOnly.

Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collects key requirements for different user groups, as well as the current session profile settings that are applied to those users.Click the Exhibit button to view the information collected by the architect. Which configuration should the architect make to meet these requirements?

Change the Clientless Access settings in an existing session profile.

Change the remote Access settings in StoreFront.

Change ICA proxy settings in an existing session profile.

Change the policy expression in an existing session policy.

Create a new session profile and policy.

For which three reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new NetScaler in an existing environment? (Choose three.)

Understand the skill set of the company.

Assess and identify potential risks for the design and build phase.

Identify other planned projects and initiatives that must be integrated with the design and build phase.

Understand the skill set of the company.

Assess and identify potential risks for the design and build phase.

Establish and prioritize the key drivers behind a project.

Determine operating systems and application usage.

Identify other planned projects and initiatives that must be integrated with the design and build phase.

Which step does a Citrix Architect need to ensure during the Define phase when following the Citrix Methodology?

The project manager agrees with road map timelines.

A phased roll out was completed.

Existing networking infrastructure is ready.

The redundancy deployment decision was made.

Scenario: Based on a discussion between a Citrix Architect and team of Workspacelab has been created across three (3) sites.They captured the following requirements during the design discussion held for NetScaler design projects:All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configuration and design.Both external and internal NetScaler MPX appliances will have Global Server Load balancing (GSLB) configured and deployed in Active/Passive mode.GSLB should resolve both A and AAA DNS queries.In the GSLB deployment, the NDR site will act as backup for the DC site. whereas the DR site will act as backup for the NDR site.When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.On the internal NetScaler, both front-end VIP and back-end SNIP will be part of the same subnet.USIP is configured on the DMZ NetScaler appliances.The external NetScaler will act default gateway for back-end servers.All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode.Which design decision must the architect make to meet the design requirements above?

The SNIP of the external NetScaler must be configured as default gateway on the back-end servers.

Interface 0/1 must be used for DNS traffic.

The SNIP of the external NetScaler must be configured as default gateway on the back-end servers.

ADNS service must be used with IPv6 address.

Policy-Based Route with next hop as CISCO IPS must be configured on the external NetScaler.

Scenario: A Citrix Architect has configured a load balancing virtual server for RADIUS authentication. The architect observes that, when the radius authentication action has the virtual server IP address, the authentication falls. However, when any of the individual server IP addresses are used, the authentication works fine.How should the architect troubleshoot this issue?

Change the Radius client from NSIP to SNIP on the Radius server

Change the Logon name attribute in Radius Action

Ensure that TCP port 1821 is open from NSIP to backend Radius servers

Verify the shared secret on Citrix ADC

Change the Radius client from NSIP to SNIP on the Radius server

For which two reasons should a Citrix Architect perform a capabilities assessment when designing and deploying a new Citrix ADC in an existing environment? (Choose two.)

Identify other planned projects and initiatives that must be integrated with the design and build phase.

Assess and identify potential risks for the design and build phase.

Determine operating system and application usage.

Identify other planned projects and initiatives that must be integrated with the design and build phase.

Determine the new environment networking requirements.

Establish and prioritize the key drivers behind a project.

Assess and identify potential risks for the design and build phase.

Scenario: A Citrix Architect needs to design a hybrid XenApp and XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in on-premises datacenter and Microsoft Azure.Organizational details and requirements are as follows:Active XenApp and XenDesktop Service subscriptionNo existing Citrix deploymentAbout 3,000 remote users are expected to regularly access the environmentMulti-factor authentication should be used for all external connectionsSolution must provide load balancing for backend application serversLoad-balancing services must be in Location BClick the Exhibit button to view the conceptual environment architecture. The architect should use ________ in Location A, and should use _________ in Location B. (Choose the correct option to complete the sentence.)

Citrix Gateway as a Service, Citrix ADC (BYO)

Citrix Gateway as a Service, no Citrix products

No Citrix products, Citrix ADC (BYO)

Citrix Gateway as a Service, Citrix ADC (BYO)

No Citrix products, Citrix ICA Proxy (cloud-licensed)

Citrix Gateway as a Service, Citrix ICA Proxy (cloud-licensed)

No Citrix products; Citrix Gateway appliance

Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in a high availability (HA) pair for the Workspace labs team. The deployment method is two-arm. and the devices are installed behind a CISCO ASA 5585 firewall. The architect enables the following features on the Citrix ADC devices: Content Switching. SSL Offloading, Load Balancing, Citrix Gateway, Application Firewall in hybrid security, and Appflow. All are enabled to send monitoring information to Citrix Application Delivery Management 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.The following requirements were discussed during the implementation:All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration.All traffic should be secured, and any traffic coming into HTTP should be redirected to HTTPS.Single Sign-on should be created for Microsoft Outlook web access (OWA).Citrix ADC should recognize Uniform Resource Identifier (URI) and close the session to Citrix ADC, when users hit the Logoff button in Microsoft Outlook web access.Users should be able to authenticate using user principal name (UPN).The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers, and the monitor probes must be sent on SSL.<a target='_blank' href='http://mail.citrix.com/'>Which Responder policy can be utilized to redirect the users from http://mail.citrix.com to https://mail.citrix.com/owa?</a>

add responder action Act redirect ''https://mail.citrix.com/owa/'' -responseStatusCode 302 add responder policy pol 'http.REQ.URL.PATH_AND_QUERY.EQ('/')' Act

add responder action Act redirect ''https://mail.citrix.com/owa/'' -responseStatusCode 307 add responder policy pol 'HTTP.REQ.IS_NOTVALID Act

add responder action Act redirect ''http://mail.citrix.com/owa/'' -responseStatusCode 302 add responder policy pol 'HTTP.REQ.IS_NOTVALID Act

add responder action Act redirect ''http://mail.citrix.com/owa/'' -responseStatusCode 302 add responder policy pol 'http.REQ.URL.PATH_AND_QUERY.EQ('/')' Act

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.They captured the following requirements during the design discussion held for a Citrix ADC design project:All three (3) Workspacelab sites (DC, NDR, and DR) will have similar Citrix ADC configurations and design.Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.GSLB should resolve both A and AAA DNS queries.In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.When the external Citrix ADC replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.On the internal Citrix ADC, both the front-end VIP and backend SNIP will be part of the same subnet.The external Citrix ADC will act as default gateway for the backend servers.All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.Which design decision must the architect make the design requirements above?

MAC-based Forwarding must be enabled on the External Citrix ADC Pair.

NSIP of the External Citrix ADC must be configured as the default gateway on the backend servers.

The Internal Citrix ADC must be deployed in Transparent mode.

The ADNS service must be configured with an IPv6 address.

Which two settings must a Citrix Architect enable to deploy a shared VLAN on Citrix ADC VPX instance on an ESX platform? (Choose two.)

Promiscuous mode for shared VLANs

Port based VLAN tagging must be enabled

Promiscuous mode for shared VLANs

Which three tasks can a Citrix Architect select and schedule using the Citrix ADC maintenance tasks? (Choose three.)

Upgrade Citrix ADC CPX Instances

Convert a high availability pair of Instances to Cluster.

Configure a high availability pair of Citrix ADC Instances.

Convert Citrix Web App Firewall Policy Instances.

Upgrade Citrix ADC CPX Instances

Convert a high availability pair of Instances to Cluster.

Convert cluster instances to a high availability pair.

Configure a high availability pair of Citrix ADC Instances.

Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.Organizational details and requirements are as follows:Active Citrix Virtual App and Citrix Virtual Desktops Service subscriptionNo existing NetScaler deploymentGlobal Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.Click the Exhibit button to view the conceptual environment architecture. The architect should use _____ in Location A, and should use ________ in Location B. (Choose the correct option to complete the sentence.)

Citrix Gateway appliance; Citrix ADC (BYO)

Citrix ADC (BYO); Citrix gateway appliance

Citrix ADC (BYO); No Citrix products

Citrix ADC (BYO); Citrix ADC (BYO)

Citrix Gateway appliance; Citrix Gateway appliance

Citrix Gateway appliance; Citrix ADC (BYO)

Citrix 1Y0-440 Practice Test 2 - Free Online Exam Questions 41-80

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

Citrix 1Y0-440 Practice Test 2

Question

Citrix 1Y0-440 Practice Tests

Practice Tests