Which three statements are true about UCS port licensing? (Choose three.)

Port licenses are not bound to physical ports.

When a port is disabled, that license is retained for use by the next enabled port.

If a licensed port is unconfigured, that license is transferred to a port function within a grace period.

Port licenses are bound to the physical ports.

Port licenses are not bound to physical ports.

Licenses are transferable across product generations.

When a port is disabled, that license is retained for use by the next enabled port.

If a licensed port is unconfigured, that license is transferred to a port function within a grace period.

Your client wants to configure jumbo frames for Network File Storage in the UCS.Which three sections must be configured to support this request? (Choose three.)

QoS system Class priority Silver > MTU > 9216

root > QoS policy > VCE_QoS_Silver needs to exist

QoS system Class priority Silver > MTU > 9216

QoS system class priority Default > MTU > 9000

root > QoS policy > VCE_QoS_Default needs to exist

root > QoS policy > VCE_QoS_Silver needs to exist

Which two statements are true about a UCS fabric interconnect cluster? (Choose two.)

Both data planes are able to actively forward traffic.

The management plane operates in active-standby mode between the two devices.

Both data planes are able to actively forward traffic.

Only the active fabric interconnect is able to actively forward traffic.

The management plane operates in active-standby mode between the two devices.

The management plane operates in active-active mode between the two devices.

Click the Exhibit button. The UCSM is not accessible. Connecting to a fabric interconnect and issuing the show cluster extended-state command displays output shown in the exhibit.What must be done to resolve this issue?

Reboot both fabric interconnects using the CLI separately.

Execute the connect local-mgmt command on each fabric interconnect.

Disable the fabric interconnect uplink ports.

Click the Exhibit button. A client has added a new chassis and connected ports 13 through 16 on both fabrics to the I/O modules. The client has verified the Twinax cabling. The Chassis/FEX Discovery Policy is set to 4 Link. However, the new chassis still fails the discovery process.Referring to the exhibit, what would resolve the problem?

Configure the links as server ports.

Enable the Administratively down ports.

Configure the links as uplink ports.

Configure the links as server ports.

Click the Exhibit button.A client decides to add a new chassis with six additional blades. The chassis is using model 2204 I/O modules with four Twinax cables per I/O module connected to fabric interconnects A and B, and ports 17 through 20. When the client tries to discover the new chassis, they receive "fabric-unsupportedconn" error messages and are not able to use all four links.Referring to the exhibit, which two actions would resolve the problem? (Choose two.)

Change the discovery policy to 4 links.

Change the Link Grouping Preference option to None.

Change the discovery policy to 4 links.

Reduce the Twinax cables from 4 to 1.

During an implementation of a Vblock 320, new Cisco UCS blades need to be provisioned using UCS Manager.What are two correct methods to accomplish this task? (Choose two.)

The service profile can be provisioned from a template.

The service profile can be cloned from another service profile.

The service profile can be provisioned from a template.

The service profile can be associated from another service profile.

The service profile can be cloned from another service profile.

The service profile can be provisioned from service manager.

You have one UCS domain and want to create four vNICs. To create the four MAC pools, you must enter the values of the block of MAC addresses.According to the VCE Logical Build Guide, what are these values?

vNIC-0-Fabric-A=00:25:B5:01:A0:00vNIC-1-Fabric-B=00:25:B5:01:B1:00vNIC-2-Fabric- A=00:25:B5:01:A2:00vNIC-3-Fabric-B=00:25:B5:01:B3:00

vNIC-0-Fabric-A=00:25:B5:02:A0:00vNIC-1-Fabric-B=00:25:B5:02:B1:00vNIC-2-Fabric- A=00:25:B5:02:A2:00vNIC-3-Fabric-B=00:25:B5:02:B3:00

vNIC-0-Fabric-B=00:25:B5:01:B0:00vNIC-1-Fabric-A=00:25:B5:01:A1:00vNIC-2-Fabric- B=00:25:B5:01:B2:00vNIC-3-Fabric-A=00:25:B5:01:A3:00

vNIC-1-Fabric-A=00:25:B5:01:A1:00vNIC-2-Fabric-B=00:25:B5:01:B2:00vNIC-3-Fabric- A=00:25:B5:01:A3:00vNIC-4-Fabric-B=00:25:B5:01:B4:00

vNIC-0-Fabric-A=00:25:B5:01:A0:00vNIC-1-Fabric-B=00:25:B5:01:B1:00vNIC-2-Fabric- A=00:25:B5:01:A2:00vNIC-3-Fabric-B=00:25:B5:01:B3:00

A customer wants you to install two Vblock System 340s. When you connect the second system to the customer's network, you begin seeing intermittent network connectivity problems.What is the problem?

The Vblock System 340s have duplicate MAC addresses.

The firmware versions of the fabric interconnects are different.

The Vblock System 340s have duplicate MAC addresses.

The Vblock System 340s have duplicate WWPNs.

The firmware versions of the Nexus 5548 switches are different.

During a Vblock System 340 deployment, you power on all of the pre-installed ESXi servers. All but one server boots successfully. You notice the boot device is not visible to the UCS blade server.What would be the cause of the problem?

The SAN boot target includes a WWPN that is not properly zoned.

The Fibre Channel ports are not configured in the Cisco UCS.

The Cisco UCS fabric interconnects are not logged into the Fibre Channel switch.

The boot policy is not properly configured with the correct boot LUN ID.

The SAN boot target includes a WWPN that is not properly zoned.

During a Vblock System 720 deployment, the customer asks you to change the boot LUN for a pair of ESXi test servers. They want to preserve the existing configuration while testing the latest version of ESXi on a larger boot device. You have provisioned the devices from the storage array by simply adding the device to the correct storage group.What must be done to allow the new devices to be installed with the latest version of ESXi so the host will boot?

Create a new boot policy and associate it with a service profile to boot from LUN ID (1).

Modify the boot policy associated with the service profile to boot from LUN ID (1).

Create a new boot policy and associate it with a service profile to boot from LUN ID (1).

Modify the storage group on the VMAX to change the LUN ID between the two devices.

Modify the storage group on the VMAX to remove the LUN ID (0).

You recently deployed a Vblock System 720. During testing, you fail fabric interconnect A and all the servers lose access to storage.What would be the cause of the problem?

Storage was only accessible to the Fibre Channel ports on fabric interconnect A.

Storage devices were not configured with a LUN address for fabric interconnect B.

A path failure on the uplink ports was not handled by the PowerPath/VE software.

Storage vMotion was not properly configured within the VMware HA environment.

When creating a standard service offering in UIM/P, what information needs to be populated? (Choose two.)

discovered converged hardware system

discovered Nexus 5000 series switch information

As part of a Vblock System 340 deployment, you are asked to install an additional UCS chassis with 2- 2204 IOM and 8 B-Series blades. The fabric interconnects have available capacity but the customer has not purchased new licenses.Which impact will licensing have on the installation?

Cisco UCS Manager initiates a 120-day grace period for ports without a license.

The unlicensed ports will not provide server or storage connectivity.

The ports will provide connectivity but will broadcast license compliance warning messages.

Vblock System 340 ships with all fabric interconnect ports licensed.

You are deploying multiple Cisco UCS chassis and the UCS manager fails to discover a chassis.What is the problem?

The chassis discovery policy is set with more links than what is physically connected.

There is a power supply unplugged in one of the chassis causing a fault.

There are too many uplinks connected to the fabric interconnect(s).

The chassis discovery policy is set with more links than what is physically connected.

There are no blades in the chassis you are trying to discover.

VCE 210-020 Practice Test 2 - Free Online Exam Questions 41-79

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

VCE 210-020 Practice Test 2

Question

VCE 210-020 Practice Tests

Practice Tests