administrator successfully installs VMware ESXi onto the first host of a new vSphere duster but makes no additional configuration changes. When attempting to log into the vSphere Host Client using the Fully Qualified Domain Name (FQDN) of the host, the administrator receives the following error message:"server Not Found –we can't connect to the server at esxit101.corp.local."• Host FQDN: esxi 101. Corp. local• Management VLAN ID: 10• DHCP: No• Management IP Address: 172.16.10.101/24• Management IP Gateway: 172.16.10.1• Corporate DNS Servers: 172.16.10.5, 172.16.10.6• DNS Domain: corp.localWhich three high level tasks should the administrator complete, at a minimum, in order to successfully log into the the vSphsrs Host Client using the FQDN for the exxi101 and complete the configuration (Choose three.)

Ensure a DNS A Record Is created for the VMware ESXI host on the corporate DNS servers,

Update the VMware ESXI Management Network IPv4 configuration to use a static a IPv4 address.

Set the value of the VMware ESXI Management Network VLAN ID to 10.

Ensure a DNS A Record Is created for the VMware ESXI host on the corporate DNS servers,

Update the VMware ESXI Management Network DNS configuration to use the corporate DNS servers for name, resolution,

Update the VMware ESXI Management Network IPv4 configuration to use a static a IPv4 address.

Configure at least two network adapters for the VMware ESXI Management Network.

Set the value of the VMware ESXI Management Network VLAN ID to 10.

Disable IPv6 for the VMware ESXI Management Network.

When configuring vCenter High Availability (HA), which two statements are true regarding the active, passive, and witness nodes? (Choose two.)

Network latency must be less than 10 milliseconds.

They must have a minimum of a 1 Gbps network adapter.

Network latency must be less than 10 milliseconds.

They must have a supported Wide Area Network (WAN).

They must have a minimum of a 10 Gbps network adapter

They must have a minimum of a 1 Gbps network adapter.

Network latency must be more than 10 milliseconds.

An administrator enables Secure Boot on an ESXi host. On booting the ESXi host, the following error message appears:Fatal error: 39 (Secure Boot Failed)

The kernel has been tampered with.

The Trusted Platform Module chip has failed.

The administrator attempted to boot with a bootloader that is unsigned or has been tampered with.

A package (VIB or driver) has been tampered with.

To keep virtual machines (VMs) up and running at all times in a vSphere cluster, an administrator would like VMs to be migrated automatically when the host hardware health status becomes degraded.Which cluster feature can be used to meet this requirement?

vSphere HA Orchestrated Restart

A VMkernel port is labelled PROD01 and uses the default TCP/IP stack. Currently, this VMkernel port is configured for supporting live virtual machine (VM) migrations.Which configuration change should the administrator make to isolate live VM migration traffic from other network traffic?

Remove PROD01 and create a new VMkernel port and set the TCP/IP stack to vSphere vMotion.

Remove PROD01 and create a new VMkernel port with the TCP/IP stack set to provisioning.

Create a new VMkernel port and set the TCP/IP stack to provisioning.

Modify PROD01 by changing the TCP/IP stack to vSphere vMotion.

After adding a new vSphere ESXi host with identical hardware configuration to an existing vSphere cluster, which task would an administrator complete prior to checking the compliance with an existing host profile?

Attach the host profile to the new host

Copy the host settings from the new host

An administrator is tasked with deploying a new on-premises software-defined data center (SDDC) that will contain a total of eight VMware vCenter instances.The following requirements must be met:• All vCenter instances should be visible in a single vSphere Client session.• All vCenter inventory should be searchable from a single vSphere Client session.• Any administrator must be able to complete operations on any vCenter instance using a single set of credentials.What should the administrator configure to meet these requirements?

A single Hybrid Linked Mode group consisting of four vCenter instances each in a Single Sign-On domain.

Two Enhanced Linked Mode groups consisting of four vCenter instances each in a Single Sign-On domain.

A single Hybrid Linked Mode group consisting of four vCenter instances each in a Single Sign-On domain.

A single Enhanced Linked Mode group consisting of eight vCenter instances in one Single Sign-On domain.

A single Hybrid Linked Mode group consisting of eight vCenter instances in one Single Sign-On domain.

Which three features are only available when using vSphere Distributed Switches instead of vSphereStandard Switches? (Choose three.)

Configuration backup and restore

An administrator is configuring vSphere Lifecycle Manager to install patches to a vSphere cluster. The cluster runs workload virtual machines (VMs) that are incompatible with vSphere vMotion, and therefore cannot be live migrated between hosts during the installation of the patches.Which configuration in vSphere Lifecycle Manager will allow the administrator to reduce the downtime associated with the patching operation without migrating the VMs?

Enable Quick Boot and set the VM power state to the suspend to memory option

Enable Distributed Power Management (DPM) and set the VM power state to the suspend to disk option

Enable Quick Boot and set the VM power state to the suspend to disk option

Enable vSphere High Availability (HA) admission control and set the VM power state to the suspend to memory option

Enable Quick Boot and set the VM power state to the suspend to memory option

An administrator creates a new corporate virtual machine (VM) template every month to include all of the latest patches. The administrator needs to ensure that the new VM template is synchronized from the primary data center site (London) to two secondary data center sites (Tokyo and New York).The administrator is aware that datastore space is limited within the secondary data center sites. The administrator needs to ensure that the VM template is available in the secondary sites the first time a new virtual machine is requested.Which four steps should the administrator take to meet these requirements? (Choose four.)

Create a new published content library at the primary site.

Create a new subscribed content library in each secondary site.

Configure the subscribed content library to download content when needed.

Add the virtual machine template to the published content library.

Create a new published content library at the primary site.

Add the virtual machine template to the subscribed content library.

Create a new published content library in each secondary site.

Create a new subscribed content library in each secondary site.

Configure the subscribed content library to download content when needed.

Configure each subscribed content library to download content immediately.

Add the virtual machine template to the published content library.

An administrator is tasked with migrating a single virtual machine (VM) from an existing VMware vCenter to a secure environment where corporate security policy requires that all VMs be encrypted.The secure environment consists of a dedicated vCenter instance with a 4-node vSphere cluster and already contains a number of encrypted VMs.Which two steps must the administrator take to ensure the migration is a success? (Choose two.)

Ensure that the source and destination vCenter instances share the same Key Management Server (KMS).

Ensure that the VM is encrypted before attempting the migration.

Ensure that the source and destination vCenter instances share the same Key Management Server (KMS).

Ensure that Encrypted vMotion Is turned off for the VM.

Ensure that the VM is encrypted before attempting the migration.

Ensure that the VM is powered off before attempting the migration.

Ensure that the source and destination vCenter Servers have a different Key Management Server (KMS).

An administrator is tasked with providing users access to objects within an existing VMware vCenter instance. The vCenter inventory has a single data center with one management vSphere cluster and five workload vSphere clusters.The following requirements must be met for assigning the users access:• Users must only be able to view all of the inventory objects associated with the management vSphere cluster.• Users must be able to edit all of the inventory objects associated with the workload vSphere clusters.The administrator creates a custom role to provide the permissions needed to allow users to edit inventory objects.Which series of steps should the administrator complete to assign the custom role and provide the required level of access to users?

Apply Global permissions to assign the Read Only role to the root vCenter object and enable propagation. Apply vCenter permissions to assign the custom role to the workload vSphere clusters.

Apply Global permissions to assign the Read Only role to the root vCenter object.Apply vCenter permissions to assign the custom role to the workload vSphere clusters and enable propagation.

Apply Global permissions to assign the Read Only role to the root vCenter object and enable propagation. Apply vCenter permissions to assign the custom role to the workload vSphere clusters and enable propagation.

Apply Global permissions to assign the Read Only role to the root vCenter object. Apply vCenter permissions to assign the custom role to the workload vSphere clusters.

Apply Global permissions to assign the Read Only role to the root vCenter object and enable propagation. Apply vCenter permissions to assign the custom role to the workload vSphere clusters.

An administrator has a requirement to revert a running virtual machine to a previous snapshot after a failed attempt to upgrade an application. When the administrator originally took the snapshot, the following choices in the Take Snapshot dialog were made:• Snapshot the virtual machine's memory = false• Quiesce guest file system = falseWhat will be the result of the administrator selecting the "Revert to Latest Snapshot" option to return the virtual machine to a previous snapshot?

The virtual machine will be restored to the parent snapshot in a powered off state.

The virtual machine will be restored to the parent snapshot in a powered on state.

The virtual machine will be restored to the parent snapshot in a powered off state.

The virtual machine will be restored to the child snapshot in a powered off state.

The virtual machine will be restored to the child snapshot in a powered on state.

The virtual machine will be restored in a suspended state

An administrator decides to restore VMware vCenter from a file-based backup following a failed upgrade. Which interface should the administrator use to complete the restore?

Direct Console User Interface (DCUI)

vCenter Management Interface (VAMI)

f\n administrator needs to provide encryption for workloads within an existing vSphere cluster. The following requirements must be met:• Workloads should be encrypted at rest.• Encrypted workloads must automatically be encrypted during transit.• Encryption should not require any specific hardware.What should the administrator configure to meet these requirements?

Unified Extensible Firmware Interface (UEFI) Secure Boot

After a number of outages within a production VMware software-defined data center, an administrator is tasked with identifying a solution to meet the following requirements:• Reduce the risk of outages by proactively identifying issues with the environment and resolving them.• Reduce the complexity of uploading log bundles when raising support tickets.Which solution should the administrator recommend to meet these requirements?

VMware Aria Operations for Logs

An administrator is responsible for performing maintenance tasks on a vSphere cluster. The cluster has the following configuration:. Identically configured vSphere ESXi hosts (esx01, esx02, esx03 and esx04)• All workloads are deployed into a single VMFS datastore provided by the external storage array• vSphere High Availability (HA) has not been enabled• vSphere Distributed Resource Scheduler (DRS) has not been enabledCurrently, a critical production application workload (VM1) is running on esx01.Given this scenario, which two actions are required to ensure VM1 continues to run when esx01 is placed into maintenance mode? (Choose two.)

Fully automated DRS must be enabled on the cluster so that VM1 will be automatically migrated to another host within the cluster when esx01 is placed into maintenance mode.

VM1 must be manually live migrated to another host within the cluster using vSphere vMotion before esx01 is placed into maintenance mode.

Fully automated DRS must be enabled on the cluster so that VM1 will be automatically migrated to another host within the cluster when esx01 is placed into maintenance mode.

VM1 must be manually shut down and cold migrated to another host within the cluster using vSphere vMotion before esx01 is placed into maintenance mode.

vSphere HA must be enabled on the cluster so that VM1 will be automatically migrated to another host within the cluster when esx01 is placed into maintenance mode.

VM1 must be manually live migrated to another host within the cluster using vSphere vMotion before esx01 is placed into maintenance mode.

VM1 must be manually migrated to another host within the cluster using vSphere Storage vMotion before esx01 is placed into maintenance mode.

An administrator needs better performance and near-zero CPU utilization from the ESXI hosts for networking functions and processing. The administrator creates a new vSphere Distributed Switch and enables network offloads compatibility.Which solution would help achieve this goal?

VSphere Distributed Services Engine

Universal Passthrough version 2

An administrator needs to perform maintenance on a datastore that Is running the vSphere Cluster Services (vCLS) virtual machines (VMs).Which feature can the administrator use in this scenario to avoid the use of Storage vMotion on the vCLS VMs?

vSphere Distributed Resource Scheduler (DRS)

What is the role of vSphere Distributed Services Engine?

Provide hardware accelerated data processing to boor.t infrastructure performance

Provide a live shadow Instance of a virtual machine (VM) that mirror, the primary VM to prevent data loss and downtime during outages

Implement Quality of Service (QoS) on network traffic within a vSphert Distributed Switch

Provide hardware accelerated data processing to boor.t infrastructure performance

Redistribute virtual machines across vSphere cluster host affinity rules following host failures or during maintenance operations

A vSphere cluster has the following vSphere Distributed Resource Scheduler (DRS) group configuration:* Virtual machine (VM) group named DB* Host groups named PROD11 and PROD55The administrator wants to force the VMs in the DB group to run on the hosts in the PROD11 group.However, if all the hosts in PROD55.Which VM/Host rule must the administrator create to ensure that these requirements are met?

A preferential rule between the DB group and PROD11 group

A preferential rule between the DB group and the PROD55 group

A required rule between the DB group and the PROD11 group

An administrator is asked to configure a security policy at the port group level of a standard switch.The following requirements must be met:• The security policy must apply to all virtual machines on portgroup-1.• All traffic must be forwarded, regardless of the destination.

MAC address changes set to accept

Following a merger with another company, an administrator is tasked with configuring an identity source for VMware vCenter so that all vSphere administrators can authenticate using their existing Active Directory accounts. Each company has user accounts in their own Active Directory forests.The following additional information has been provided:• The corporate policy states that only Windows-based machine accounts are allowed in ActiveDirectory. Which action should the administrator take to configure vCenter Single Sign-On (SSO) to meet this requirement?

Configure SSO to use Active Directory over LDAP as the identity source.

Configure SSO to use OpenLDAP as the identity source.

Join the vCenter Server Appliance to the LDAP domain.

Configure SSO to use Active Directory (Integrated Windows Authentication) as the identity source.

An administrator is tasked with allowing a single user the ability to take snapshots on a virtual machine. When looking in vCenter, the administrator can see that there are already users and groups assigned permissions on the virtual machine as follows:* The group VMJJsers has the Virtual Machine Power User role.* The group VM_Viewers has the Read Only role.The administrator confirms that the user requesting the additional access is currently one of five members of the VM_Viewers groupWhich two steps should the administrator take to grant this user the additional access required without impacting the user access of others? (Choose two.)

Add a new permission on the virtual machine object selecting the user and the new custom role.

Create a new custom role with the Virtual Machine Snapshot Management privileges.

Add the user to the VM_Users group and leave the permissions on the virtual machine object unchanged

Add a new permission on the virtual machine object selecting the user and the new custom role.

Edit the Read Only role to add the Virtual Machine Snapshot Management privileges.

Create a new custom role with the Virtual Machine Snapshot Management privileges.

new permission on the virtual machine object selecting the VM_Viewers group and the new custom

An administrator is investigating user logon failures for a VMware vCenter instanceWhere can the administrator find log files containing information related to user login activities?

On the vCenter Server Appliance

On the vCenter Management Interface

On the ESXi host using the Direct Console User Interface ()

On the vCenter Server Appliance

In the vSphere Client when viewing the vCenter virtual machine

An administrator needs to configure a content library solution based on the following information:* A new corporate virtual machine (VM) template is created every month to include all of the latest patches.* The new VM template should be downloaded from the primary data center site (London) to two secondary data center sites (Tokyo and New York) as soon as possible.* There is limited disk space available at one of the secondary data center sites (Tokyo) due to an ongoing data center consolidation project.Which four steps should the administrator take to configure the content library solution before adding a VM template? (Choose four.)

Configure the New York subscribed content library to download content immediately.

Configure the Tokyo subscribed content library to download content when needed

Create a new published content library at the primary site

Create a new subscribed content library in each secondary site

Create a new published content library In each secondary site

Configure the New York subscribed content library to download content immediately.

Configure the Tokyo subscribed content library to download content immediately

Configure the Tokyo subscribed content library to download content when needed

Create a new published content library at the primary site

Configure the New York subscribed content library to download content when needed.

Create a new subscribed content library in each secondary site

An administrator notices a performance issue in VMvvare vCenter To try and understand more about the performance issue, the administrator needs to gather more information about the vCenter database to eliminate a potential disk space issue.Which two tools can the administrator use? (Choose two.)

vCenter Management Interface (VAMI)

An administrator is preparing to perform an update to vSphere clusters that are running vSAN. The administrator wants to ensure that the following requirements are met as part of the update:* All hosts in the cluster are updated with the same software.* The firmware versions on the hosts are updated* The new software versions are checked for compliance against the vSAN Hardware Compatibility List.Which three steps should the administrator take to meet these requirements? (Choose three.)

Configure vSphere Lifecycle Manager with an image for the cluster.

Register the vendor hardware management system as a vCenter Server extension.

Run a hardware compatibility check using vSphere Lifecycle Manager

Configure vSphere Lifecycle Manager with an image for the cluster.

Register the vendor hardware management system as a vCenter Server extension.

Download the firmware updates from the VMware website

Download the firmware updates from the vendor website.

Run a hardware compatibility check using vSphere Lifecycle Manager

Configure vSphere Lifecycle Manager with a baseline for the cluster.

The vCenter inventory contains a virtual machine (VM) template called Linux-01 The administrator wants to install a software patch into Linux-01 while allowing users to continue to access Linux-01 to deploy VMs. Which series of steps should the administrator take to accomplish this task?

1. Verify that Linux-01 is in a content library 2. Checkout Linux-01 3. Install the software patch 4.Check in Linux-01

1. Verify that Linux-01 is in a content library 2. Clone Linux-01 3. Convert the clone to a VM 4. Install the software patch.

1. Convert Linux-01 to a VM 2 Install the software patch 3 Convert the VM back to a VM template 4 Add Linux-01 to the content library.

1. Verify that Linux-01 is in a content library 2. Checkout Linux-01 3. Install the software patch 4.Check in Linux-01

1. Clone Linux-01. 2. Convert the clone to a VM 3. Install the software patch. 4. Convert the VM back to a template.

An administrator has a requirement to revert a running virtual machine to a previous snapshot after a failed attempt to upgrade an application. When the administrator originally took the snapshot the following choices in the Take Snapshot dialog were made:Snapshot the virtual machine's memory = falseQuiesce guest file system = falseWhat will be the result of the administrator selecting the 'Revert to Latest Snapshot?option to return the virtual machine to a previous snapshot?

The virtual machine will be restored to the parent snapshot in a powered off state.

The virtual machine will be restored to the parent snapshot in a powered on state

The virtual machine will be restored to the parent snapshot in a powered off state.

The virtual machine will be restored to the child snapshot in a powered off state

The virtual machine will be restored to the child snapshot in a powered on state.

Which step is completed during Stage 1 of the vCenter Server Appliance deployment?

Join a vCenter Single Sign-On domain

Create a new vCenter Single Sign-On domain

An administrator is preparing for a deployment of a new vCenter Server Appliance. The following information has been provided to complete the deployment:* ESXi Host name (FQDN): esxOl.corp local . ESXi IP Address: 172.20.10.200* vCenter Server Name (FQDN): vcsa01 corp.local* vCenter Server IP Address: 172.20 10.100* NTP Server: 172.20.10.20* DNS Server: 172.20.10.1* Deployment Size: Tiny* Storage Size: DefaultWhich two actions must the administrator complete before starting the installation of the vCenter Server Appliance? (Choose two.)

Create a reverse DNS A record for the vCenter Server (vcsaOl).

Create a forward DNS A record for the vCenter Server (vcsaOl ).

Create a DNS CNAME record for the vCenter Server (vcsaOl corp.local)

Create a DNS CNAME record for the ESXi Host server (esx01 corp.local).

Create a reverse DNS A record for the vCenter Server (vcsaOl).

Create a reverse DNS A record for the ESXi Host server (esx01 )

Create a forward DNS A record for the vCenter Server (vcsaOl ).

VMware 2V0-21.23 Practice Test 2 - Free Online Exam Prep & Questions

An administrator is responsible for the management of a VMware vCenter instance that is currentlyexperiencing performance issues. The administrator quickly identifies that the CPU and memoryutilization of vCenter is consistently over 80%. Upon further analysis, it seems that the vpxd process iscontributing significantly to the performance issue. A combination of which four steps should theadministrator take to resolve the performance issues and ensure that a similar issue can be rectifiedwithout requiring downtime to vCenter moving forward? (Choose four.)

Become a Premium Member for full access

Unlock Premium Member

VMware 2V0-21.23 Practice Test 2

Question

VMware 2V0-21.23 Practice Tests

Practice Tests