An administrator is required to configure several Microsoft Windows virtual machines (VMs) to support Secure Boot for a critical secure application.The following information is provided:* The corporate security policy states that all forms of data encryption must utilize a key provider.* The firmware of each VM is currently set to use Unified Extensible Firmware Interface (UEFI).* Due to the nature of the application running within the VMs, the guest operating system for each VM is currently a minimum of Windows Server 2008 and Windows 7.Which security feature should the administrator implement to meet these requirements?

Virtual Trusted Platform Module (vTPM)

vSphere Virtual Machine Encryption

vSphere Visualization-Based Security

Virtual Intel Software Guard Extensions (vSGX)

Virtual Trusted Platform Module (vTPM)

An administrator is tasked with adding two additional hosts into an existing production vSphere cluster to support the need for additional capacity.The vSphere cluster currently has four identically configured ESXi hosts (esxOT esx02. esx03 and esx04) that utilize Intel Skylake-based CPUs. The two new hosts (esx05 and esx06) are configured identically in terms of memory and storage to the existing hosts: but utilize Intel Ice Lake-based CPUs.The administrator must ensure that:* Any virtual machine migrates to any of the six ESXi hosts running in the cluster.* There is no virtual machine downtime during the process of adding the new hosts.Which step should the administrator take to meet these requirements?

Configure Enhanced vMotion Compatibility (EVC) mode on the existing cluster and add the two new hosts into the cluster.

Create a new vSphere cluster with Enhanced vMotion Compatibility (EVC) enabled and move all hosts into A' the new cluster

Create a new vSphere cluster and move only three hosts into the new cluster.

Configure Enhanced vMotion Compatibility (EVC) mode on the existing cluster and add the two new hosts into the cluster.

Create a new vSphere cluster with vSphere High Availability (HA) enabled and move all hosts into the new cluster

An administrator needs to create affinity rules for the following vSphere cluster setup:* The cluster contains two virtual machines (VMs) named app01 and app02.* The cluster contains six hosts named esx11 through esx16.* The app01 and app02 VMs run software that is licensed to run only on esx11, esx12, or esx13.* vSphere Distributed Resource Scheduler (DRS) is configuredWhich set of steps must the administrator perform to ensure that the licensing requirements are met for app01 and app02?

1 Add the VMs to a VM group and the esx11 - esx13 hosts to a host group. 2 Create a VM-Host required rule between the VM group and the host group.

1. Add all the hosts to a host group. 2. Create a VM-VM anti-affinity rule for app01 and app02

1. Add the esx11 - esx13 hosts to a host group 2. Create a VM-VM affinity rule for app01 and app02

1 Add the VMs to a VM group and the esx11 - esx13 hosts to a host group. 2 Create a VM-Host required rule between the VM group and the host group.

1. Add the VMs to a VM group and the esx11 - esx13 hosts to a host group. 2. Create a VM-Host preferential rule between the VM group and the host group

Refer to Exhibit: An environment has the following configuration:* Resource Pool ''RP-MOM? has a reservation of 6GHz and one running virtual machine (VM) 'VM-M1? with 1 GHz reserved* Resource Pool ^RP-KID? has a reservation of 2GHz, and expandable reservations is activatedThe administrator creates two VMs, ''VM-K1? and 'VM-K2?, in the ''RP-KID? resource pool with 2GHz reserved for each, and turns on ''VM-M1 ?Given this scenario, which statement is true?

VM-K2 can be powered on because it can get the resources needed from RP-MOM.

The administrator must deactivate expandable reservations to turn on VM-K2

The administrator can create a third VM ( VM-K3?) at RP-KID and reserve 6GHz

VM-K2 can be powered on because it can get the resources needed from RP-MOM.

VM-K2 cannot be powered on because there are not enough resources in RP-KID.

Refer to the exhibit. An administrator configures a distributed switch and adds the first VMware ESXi server to it.The administrator also performs the following activities:* The administrator assigns two uplinks to the distributed switch.* The administrator enables uplink teaming.When attempting to perform a health check of the teaming policy, the health status of the Teaming and Failover reports as ' Unknown?, as seen in the exhibit.What can the administrator changes in the distributed switch for the health status to report correctly?

Add a minimum of two hosts with two uplinks each

Add a minimum of three hosts with two uplinks each

Add a minimum of two hosts with two uplinks each

Add a minimum of three hosts with four uplinks each

Add a minimum of two hosts with one uplink each

A vSphere cluster hosts a three-tier application The cluster has 50% resources available. If a host in the cluster fails, the database server must be online before the application server, and the application server must be online before the Web server.Which feature can be used to meet these requirements?

vSphere HA Orchestrated Restart

What are two uses cases for VMware Tools? (Choose two.)

Ability to shut down a virtual machine remotely

Support for unsupported network device drivers

Time synchronization with an NTP server

Direct deployment of the Aria Automation Config minion

Share folders between ESXi hosts and guest OS file systems

Ability to shut down a virtual machine remotely

Support for unsupported network device drivers

An administrator wants to use tag-based placement rules on their virtual machine disks using VMware vCenter.Which option would allow the administrator to achieve this?

Storage Policy Based Management

vSphere Storage APIs for Storage Awareness (VASA)

vSphere Distributed Resource Scheduler (DRS)

An administrator runs a two-node vSphere cluster, which contains two domain controller virtual machines (VMs). The administrator wants to ensure that VMs run on separate hosts without interfering with normal maintenance operations.How should the administrator configure Distributed Resource Scheduler (DRS)?

Create a 'Should run Virtual Machines to Hosts' anti-affinity rule.

Create a 'Must run Virtual Machines to Hosts' anti-affinity rule.

Create a 'Virtual Machines to Virtual Machines' anti-affinity rule.

Create a 'Virtual Machines to Virtual Machines' dependency rule.

Create a 'Should run Virtual Machines to Hosts' anti-affinity rule.

An administrator plans to bring VMware vCenter offline in order to perform hardware mainte-nance on the host where the vCenter Server Appliance is running.Which vSphere feature must be configured to ensure that vCenter users experience minimal downtime?

vCenter Server High Availability

vSphere Distributed Resource Scheduler

vCenter Server High Availability

An administrator receives reports from the application team of poor performance of a virtual ma-chine (VM). The administrator reviews the virtual machine and discovers that it has 20 snapshots that are over 12 months old.What could the administrator do to improve the VM's performance?

Consolidate all of the snapshots into the base VM.

Inflate the base disk to make space for future snapshots.

Consolidate all of the snapshots into the base VM.

Identify and delete the largest delta .vmdk file.

An administrator remotely deploys VMware ESXi using an out of band management connection and now needs to complete the configuration of the management network so that the host is accessible through the vSphere Host Client.The following information has been provided to complete the configuration:* Host FQDN esxi01corp.local* Management VLAN ID: 10 DHCP: No* Management IP Address: 172.16.10.101/24* Management IP Gateway: 172.16.10.1. Corporate DNS Servers: 172 16.10.5, 172.16.10..6* DNS Domain: corp.localIn addition, all host configurations must also meet the following requirements:* The management network must use only IPv4 network protocols.* The management network must be fault tolerantWhich four high level tasks should the administrator complete in the Direct Console User Interface (DCUI) in order to meet the requirements and successfully log into the vSphere Host Client? (Choose four.)

Set the value of the VMware ESXi Management Network VLAN ID to 10

Configure at least two network adapters for the VMware ESXi Management Network

Update the VMware ESXi Management Network IPv4 configuration to use a static IPv4 address

Create a DNS A Record for the VMware ESXi host on the corporate DNS servers

Set the value of the VMware ESXi Management Network VLAN ID to 10

Configure at least two network adapters for the VMware ESXi Management Network

Update the VMware ESXi Management Network IPv4 configuration to use a static IPv4 address

Create a DNS A Record for the VMware ESXi host on the corporate DNS servers

Disable IPv6 for the VMware ESXi Management Network

Restore the original Management vSphere Standard Switch.

Update the VMware ESXi Management Network DNS configuration to use the corporate DNS servers for ' names resolution

An administrator successfully installs VMware ESXi onto the first host of a new vSphere cluster but makes no additional configuration changes. When attempting to log into the vSphere Host Client using the Fully Qualified Domain Name (FQDN) of the host, the administrator receives the following error message:''Server Not Found - We can't connect to the server at esxi101.corp.local?The following information has been provided to complete the configuration:* Host FQDN esxi101.corp.local* Management VLAN ID: 10* DHCP: No* Management IP Address: 172.16 10.101 / 24* Management IP Gateway: 172.16.10.1. Corporate DNS Servers: 172.16 10.5, 172.16.10.6* ONS Domain: corp.localIn addition, all host configurations must also meet the following requirements:* The management network must use only IPv4 network protocols.* The management network must be fault tolerantWhich three high level tasks should the administrator complete, at a minimum, in order to successfully log into the vSphere Host Client using the FQDN for esxi101 and complete the configuration? (Choose three.)

Ensure a DNS A Record is created for the VMware ESXi host on the corporate DNS servers.

Update the VMware ESXi Management Network IPv4 configuration to use a static a IPv4 address

Set the value of the VMware ESXi Management Network VLAN ID to 10

Ensure a DNS A Record is created for the VMware ESXi host on the corporate DNS servers.

Update the VMware ESXi Management Network DNS configuration to use the corporate DNS servers for names resolution

Update the VMware ESXi Management Network IPv4 configuration to use a static a IPv4 address

Configure at least two network adapters for the VMware ESXi Management Network

Set the value of the VMware ESXi Management Network VLAN ID to 10

Disable IPv6 for the VMware ESXi Management Network

An administrator is tasked with looking into the disaster recovery (DR) options for a software-defined data center (SDDC).The following requirements must be met:* All virtual machines (VMs) must be protected to a secondary site.* The source VMs must remain online until the failover.* When failing over to the secondary site, application downtime is allowed* The DR failover must be managed from the vSphere Client.* Costs must remain as low as possible.How can the administrator accomplish this task?

Configure VMware a Site Recovery Manager and combine it with vSphere Replication.

Configure VMware Cloud Disaster Recovery (VCDR) and combine it with array-based storage replication

Configure VMware a Site Recovery Manager and combine it with vSphere Replication.

Configure a subscribed content library on the secondary site.

Configure VMware Site Recovery Manager and combine it with array-based storage replication.

An administrator needs to update a VMware vCenter instance to a newer minor release version. Due to restrictions within the environment, the vCenter instance does not have access to the Internet As a first step, the administrator downloads the required update on another machine.What are the next steps the administrator must perform to complete the update?

Mount the ISO update file to the CD-ROM drive of the vCenter instance. Use the vCenter Management Interface to select the CD-ROM as the source for the update

Place the update ISO file in a Virtual Machine File System (VMFS) datastore. Use the vSphere Client to select the update ISO file as the source for the update

Mount the ISO update file to the CD-ROM drive of the vCenter instance. Use the vCenter Management Interface to select the CD-ROM as the source for the update

Place the ISO update file in a folder accessible to the vCenter instance over HTTPS. Use the vCenter Management Interface to select the update file as the source for the update

Place the ZIP update file in a folder accessible to the vCenter instance over HTTPS Use the vSphere Client to select the update file as the source for the update.

Which two tasks can be completed using vSphere LifeCycle Manager? (Choose two.)

Check that the ESXi hosts are compliant with the recommended baseline and update the hosts

Manage the firmware lifecycle of ESXi hosts are part of a managed cluster using baselines

Manage the firmware lifecycle of ESXi hosts that are part of a managed cluster with a single image.

Check that the ESXi hosts are compliant with the recommended baseline and update the hosts

Upgrade VMware vCenter from version 7 to 8.

Check the hardware compatibility of the hosts in a cluster against the VMware Compatibility Guide (VCG) using baselines.

Manage the firmware lifecycle of ESXi hosts are part of a managed cluster using baselines

What are two use cases for VMware vSphere+? (Choose two.)

Enhance on-premises workloads by managing them through the VMware Cloud Console

Simplify vCenter lifecycle management through cloud-enabled automation

Enhance on-premises workloads by managing them through the VMware Cloud Console

Allow live migration between on-premises and VMware Cloud

Increase the performance of the native vCenter vMotion capability

Allow the creation of affinity and anti-affinity rules to be used during failover events

Simplify vCenter lifecycle management through cloud-enabled automation

An administrator is tasked with configuring remote direct memory access (RDMA) over Converged Ethernet v2 (RoCE v2).Which two types of adapters must the administrator configure? (Choose two.)

Software NVMe over RDMA storage adapter

Fibre Channel over Ethernet (FCoE) adapter

Software NVMe over RDMA storage adapter

An administrator is tasked with configuring vSphere Trust Authority. The administrator has completed the following steps:• Set up the workstation• Enabled the Trust Authority Administrator• Enabled the Trust Authority State• Collected information about the ESXi hosts and vCenter to be trustedWhich step does the administrator need to complete next?

Import the Trusted Host information to the Trust Authority Cluster

Import the Trusted Cluster information to the Trusted Hosts

Create the Key Provider on the Trusted Cluster

Import the Trusted Host information to the Trusted Cluster

VMware 2V0-21.23 Practice Test 3 - Free Online Exam Prep & Questions

What is the minimum network throughput in Gb/s for vSAN using the Express Storage Architecture (ESA)?

Become a Premium Member for full access

Unlock Premium Member

VMware 2V0-21.23 Practice Test 3

Question

VMware 2V0-21.23 Practice Tests

Practice Tests