An engineer designed a new wireless network for an enterprise customer. The customer is concerned that some wireless features may not be available because the bill of materials has only Base and no WPlus licenses for the Cisco WLC version 8. What is the reason for the engineer to take this approach regarding the licenses?

All WLC features are available because WPLUS license is now included in the Base license.

ForceExtend AP needs a WPlus license.

CAPWAP Data Encryption licenses are required for this feature.

All WLC features are available because WPLUS license is now included in the Base license.

To have all the features, plus licenses must be installed on the WLC.

Refer to the exhibit. Client A is roaming from AP1 on WLC1 to AP2 on WLC2. The client roams between two APs registered to two different controllers. The WLAN on the two controllers is on a different subnet. Which scenario explains the client's roaming behavior?

The client database entry is different than that of Layer 2 roam. (Instead of mov-ing, it copies the database to the new controller.)

The client database entry is different than that of Layer 2 roam. (Instead of cop-ying, it moves the database to the new controller.)

The client database entry is different than that of Layer 2 roam. (Instead of mov-ing, it copies the database to the new controller.)

The client database entry is different than that of Layer 2 roam because the cli-ent database is neither moved nor copied into the new controller.

The client database remains in the mobility anchor controller and it is not cop-ied or moved.

An engineer working for an enterprise deployed multiple Cisco WLCs. A controller that sits in the R&D division is connected through a firewall and is part of the same mobility group. The engineer must ensure that the mobility tunneling is available through the firewall and test it as R&D engineers roam the production ..within their department. How is this requirement met?

mapping on UDP port 16666 and mapping on Protocol 97 between management ports

mapping on UDP port 16666 and mapping on Protocol 96 between management ports

mapping on UDP port 16666 and mapping on Protocol 97 between management ports

mapping on UDP port 16667 and mapping on Protocol 97 between management ports

mapping on UDP port 16667 and mapping on Protocol 96 between management ports

An engineer is implementing a wireless design for a service provider. The design includes a Catalyst 9800, a stack of two Catalyst 9300X-48HX switches, and 9166 APs. Each AP must be named using the Floor-439412509-01X sting where X is the area number. The engineer wants to connect the APs to the switch stack using POE. How many APs must the engineer connect to the stack so the APs run using full functionalities?

all ports on switch 2 of the stack

all ports on switch 1 of the stack

A customer uses a Cisco Catalyst 9800 Series wireless controller to manage all of the APs for a campus network. Secure guest access is required for the guest network. A Cisco 5520 anchor controller is deployed within a DMZ. Which design approach ensures that the mobility tunnel is established successfully between the wireless controller and the anchor controller?

Run an Inter-Release Controller Mobility compatible software version on the anchor controller.

Run an Inter-Release Controller Mobility compatible software version on the wireless controller.

Enable control plane encryption on the wireless controller.

Disable data link encryption on the anchor controller.

Run an Inter-Release Controller Mobility compatible software version on the anchor controller.

An engineer is working for a manufacturing company that has a centralized deployment model. Guests at headquarters need wireless access for presentations, demonstrations, and sharing of information. The engineer must provide external users with secure guest access by connecting to anchor controllers on the DMZ. Auto-Anchor Mobility has been selected in the mobility group to accomplish it. Both anchors are configured as part of the mobility group for HQ. Which design approach ensures that clients connect to the primary controller first and are pushed to the secondary if the primary fails?

Set the Anchor priority for the primary controller to 1.

Set the Anchor priority for the secondary controller to 1.

Configure ECMP but weigh the cost to be higher to go to the primary.

Configure ECMP but weigh the cost to be higher to go to the secondary.

Refer to the exhibit. An engineer is about to establish a mobility peer connection between a Cisco Catalyst 9800-CL version 16.10.1e and Cisco AireOS 5520 version 8.8.120.0. The data path between the 9800-CL and AireOS 5520 is down, but its control path is up. Based on the configuration, what is the cause of the issue?

The data-dtl s is disabled on the AireOS 5520 WLC, which causes the data path to be down.

The certificate hash key is incorrect, which causes the data path to be down.

Encrypted mobility is being used in the 5520 configuration, which causes the data path to be down.

The data-dtl s is disabled on the AireOS 5520 WLC, which causes the data path to be down.

The data-link-encryption configuration is missing from the 9800-CL configuration.

A network consultant is designing a wireless network for a government agency. The customer requires high security between any device communication. The design includes AireOS, Cisco IOS-XE controllers, and Cisco 4800 Series APs. Which requirement must be met to enhance the mobility group security?

Enable MIC authentication between the mobility group members.

Use a different group name for each mobility member.

Enable MIC authentication between the mobility group members.

Enable Mobility Encryption on the network.

Use a complex group name for the mobility group.

Refer to the exhibit. An engineer must design a mobility group that has these requirements:* The mobility group must consist of two WLCs.* All WLCs must run software version 8.0 or later.* The WLCs must connect via an IPv4 network.* Two of the WLCs must be in an SSO high availability pair.Which two configurations must be included in the design? (Choose two.)

The WLAN SSID must be consistent across all the WLCs.

Each WLC must use the same mobility domain name.

All the WLCs must be of the same model or type.

Only WLCs in an SSO high availability pair must use the same virtual IP address.

The WLAN SSID must be consistent across all the WLCs.

All the WLCs must run the same software version.

Each WLC must use the same mobility domain name.

A customer has two Cisco wireless controllers named WLC-A and WLC-B. Each controller is in a different building on a campus. The WLCs have different Layer 3 interfaces and broadcast the same SSIDs from their respective APs. Users must remain connected to the same VLAN and maintain their IP addresses during roaming from the APs that are attached to WLC-A and WLC B. Which action accomplishes the requirement?

Create a mobility group between the two WLCs to allow auto-anchoring.

Create an SSO cluster to ensure that client sessions sync between WLCs.

Enable 802.11r on each SSID on both WLCs to allow caching of the PMK.

Enable AP groups using the same name on both WLCs for each group.

A company is upgrading the wireless infrastructure and is in a state of transition. Some parts of the company's building still run on the legacy WLC. The new WLC is not located at the same site as the legacy WLC. The company requires seamless client inter-controller roaming between the new WLC and the legacy WLC, with no disruptions. Both WLCs are separated by firewalls. Which troubleshooting command validates that the mobility control packets between the WLCs can be sent and received?

mapping mobility_peer IP address

mapping mobility_peer_management IP address

A customer uses a Cisco 5520 WLC that is connected via a single 10-GB interface to manage the wireless network. The wireless network includes 500 APs for the campus network. The customer wants to add 300 APs and is concerned about traffic load and lack of redundancy. The purchase of a second controller is not an option. Which design approach mitigates the customer concerns?

Connect a second 10-GB interface on the WLC and implement LAG.

Connect a second 10-GB interface on the WLC and set the port as a secondary port.

Connect a second 10-GB interface on the WLC and implement LAG.

Implement a vWLC and configure SSO with the WLC.

Implement a vWLC and configure N+1 redundancy with the WLC.

An engineer needs a wireless design to provide redundancy for APs at remote sites that are connected to Cisco 3504 Wireless LANControllers. The central Cisco 5520 Wireless LAN Controller supports 2000 APs and has 1975 access points associated to it. The engineer decides that not all APs at the remote sites must remain functional in the event of a failure. How does the engineer ensure that the most important access points at the remote sites remain online while not impacting the main site?

Enable Global AP Fail over Priority, set the 1975 APs to a priority of 'high', and set the 25 most important APs at the remote sites to 'critical'.

Enable AP Fallback Mode, set the 1975 APs to a priority of 'high', and set the 25 most important APs at the remote sites to 'critical'.

Enable Global AP Fail over Priority, leave the 1975 APs at the default priority, and set the most important APs at the remote sites to 'low'.

Enable AP Fallback Mode, leave the 1975 APs at the default priority, and set the most important APs at the remote sites to 'high'.

Based on a wireless network design, an engineer configured a primary and secondary controller for their APs. A power interruption caused the primary Cisco WLC to go down, and, as expected, all APs joined the secondary controller. When the primary controller came back up, all the APs remained joined to the secondary controller. Which approach must the engineer take for the APs to move back to the primary?

Set AP Fallback to Enabled on the primary controller.

Set AP Fail over Priority to 4 on each AP.

Set AP Fallback to Enabled on the secondary controller.

Set AP Fallback to Enabled on the primary controller.

Set AP Fail over Priority to Critical globally.

A hospital wireless environment was designed with these characteristics:* RF coverage* better than -67 dBm in the 5 GHz spectrum* RRM be used for DCA and TPC in the 2.4 GHz band* RRM be used for DCA and TPC in the 5 GHz bandAfter deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?

TPC drastically reduces Tx power in the 2.4 GHz band.

Excessive co-channel interference in the 2.4 GHz band exists.

Excessive overlapping channels in the 2.4 GHz band exists.

TPC drastically increases Tx power in the 2.4 GHz band.

TPC drastically reduces Tx power in the 2.4 GHz band.

A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients. What should be enabled on the VoWLAN SSID?

802.11v BSS Transition Management

An engineer must design and configure a wireless network for:* pervasive coverage in an oil terminal* casual web and email traffic* 5 GHzWhat is the best design?

Keep all the data rates enabled and set the AP power assignment mode to auto.

Keep the power assignment as auto and disable 802.11n and 802.11ac MCS rate.

Disable all data rates below 24 Mbps and keep the power assignment on the AP as auto.

Keep all the data rates enabled and set the AP power assignment mode to auto.

Disable all data rates below 54 Mbps and assign static power level 1 on all access points.

A 60,000-square foot outdoor area must be surveyed. The survey must be completed in the least amount of time. Which tool or equipment is used when performing the site survey?

site survey tool that has a GPS module

additional access points that use sniffer mode

site survey tool that has modules in sniffer mode

additional access points that use GPS mode

site survey tool that has a GPS module

Cisco 300-425 Practice Test 5 - Free Online Exam Prep & Questions

A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices. The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 MB. What should be included in the design to accomplish this objective?

Become a Premium Member for full access

Unlock Premium Member

Cisco 300-425 Practice Test 5

Question

Cisco 300-425 Practice Tests

Practice Tests