AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file. The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

The LTM device exceeds licensed traffic limits.

The site has too many licensed modules.

The LTM device has not provisioned AVR.

An LTM Specialist upgrades the switching infrastructure and the backend servers on the LAN segments.The LTM Specialist notices a 20% memory usage increase on the BIG-IP device while handling the same number of concurrent connections.A comparison of statistics pre-upgrade and post-upgrade shows a significant reduction on the following:-RTT between the BIG-IP device and the backend servers-Packet drops in the switchTime to First Byte (TTFB)The LTM Specialist is concerned with the scalability of the number of concurrent connections with the new memory usage.Which setting should be changed to reduce the memory usage on the BIG-IP device?

Reduce the proxy buffer high setting on the server-side TCP profile

Increase the receive window of the client-side TCP profile

Increase the proxy buffer high setting on the server-side TCP profile

Reduce the idle of the client-side TCP profile

An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member10.10.101:80 on an LTM device.Which expression should the LTM Specialist use?

# tmsh create it pool http_pool members {10.10.10.101:80}

# tmsh create pool http_pool members {10.10.10.101:80}

# tmsh create pool http_pool members add {10.10.10.101:80}

# tmsh create it pool http_pool members {10.10.10.101:80}

# tmsh create itm pool http_pool member {10.10.10.101:80}

The network team introduces a new subnet 10.10.22.0/24 to the network. The route needs to be configured on the F5 device to access this network via the 30.30.30.158 gateway.How should the LTM Specialist configure this route?

Tmsh create net route 10.10.22/24 gw 30.30.30.158

Tmsh modify net route 10.10.22/24 gw 30.30.30.158

Tmsh create net route 10.10.22/24 gw 30.30.30.158

Tmsh changey net route 10.10.22/24 gw 30.30.30.158

Tmsh add net route 10.10.22/24 gw 30.30.30.158

An LTM Specialist is the administrator of an HA pair that contains two BIG IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.Which configuration should the LTM Specialist use to meet the requirement?

Create a new partition and set the default traffic group to TG2

Move the BIG-IP Managers from TG1 to TG2

Create a new partition and set the default traffic group to TG2

Modify the default traffic group of the Common partition to TG2

Restrict the Traffic Group Access of BIG-I Managers to TG2

Refer to the exhibit. The pool shown is configured with four pool members in a variety of states. The application is receiving a large number of request. The LTM Specialist needs to make changes to make sure that all members receive the same levels of traffic.Which changes need to be made?

Enable 10.80.1.40 and 10.80.1.1.20 disable group activation, enable Round Robin

Enable 10.80.1.40 disable priority group activation, enable ratio

Enable 10.80.1.40 and 10.80.1.1.20 disable group activation, enable Round Robin

Enable 10.80.1.20 disable priority group activation, enable Round Robin

Enable 10.80.1.40 and 10.80.1.20 disable priority group activation, enable ratio.

RADIUS authentication has been configured on the LTM device. The default remote user access requirements are as shown:Read only access to the configuration UtilityAccess to TMOS shellWhich two items need to be configured in this situation? (Choose two)

Console access is Advanced Shell

Default remote user role is Guest

Default remote user role is Manager

Default remote user role is Operator

What should an LTM Specialist configure on an LTM device to send AVR notification emails?

Email notification to be sent via SMTP from the LTM device

Email notification to be sent via iControl from the LTM device

Syslog on the LTM device to send to an SMTP server

Custom SNMP traps on the LTM device for AVR notifications

Email notification to be sent via SMTP from the LTM device

Which Standard Virtual Server settings should an LTM Specialist use to load balance across routed path of two different ISPs?

both address and port translation enabled

address translation enabled and port translation disabled

both address and port translation enabled

both address and port translation disabled

address translation disabled and port translation enabled

An LTM Specialist needs to terminate client SSL traffic and based on the cookie presented by client.Which set of profiles should the LTM Specialist use?

HTTP, Client SSL, Cookie Persistence Profile,

HTTPS, Client SSL, Cookie Persistence Profile

HTTP, Server SSL, SSL Cookie Profile

HTTPS, Server SSL, SSL Cookie Profile

HTTP, Client SSL, Cookie Persistence Profile,

An LTM Specialist observes decreased performance and intermittent connection reap LTM system. Based on the configuration, which action will address these issues?

Use a shorter idle timeout on the TCP profile.

Use a FastL4 profile on the virtual server

Use a default caching profile on the virtual server.

Use a shorter idle timeout on the TCP profile.

An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.Which step should the LTM Specialist take to meet this requirement?

create VLANs for each subnet and set the name accordingly

use an iRule to change the output of the report

export the report and add the department names manually

create VLANs for each subnet and set the name accordingly

define active subnets and assign a name to certain subnets

An LTM device configuration is as shown:An LTM device configuration is as shown What should be the two expected outcomes based on this configuration? (Choose two.)

A client session that has been idle for 20 minutes will be balanced to a new pool member

A client session that has been idle for 12 minutes will be sent to the same pool member

A client session that has been idle for 16 minutes will be sent to the same pool member

A client session that has been idle for 20 minutes will be balanced to a new pool member

A client session that has been idle for 14 minutes will be balanced to a new pool member

A client session that has been idle for 48 minutes will be sent to the same pool members

A client session that has been idle for 12 minutes will be sent to the same pool member

An LTM Specialist needs to load balance an application using an LTM device to meet the requirements:The application servers do NOT Support SSL, but client access to the application should be secured.Multiple requests from the same client should be sent to the same pool member.All pool members will have roughly the same processing power, and traffic should be distributed evenly.The LTM device is NOT the pool members' default gateway.Which configuration should the LTM Specialist?

A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie persistance.

a performance 14 virtual server with a SNAT and cookie persistence

a performance L4 virtual server with a Client SSL profile and Source Address persistence

A performance L4 virtual server with a SNAT, HTTP profile. Server SSL profile, and cookie persistence

A standard virtual server with a SNAT, HTTP profile Server SSL profile, and cookie persistence

A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie persistance.

An HTTP monitor is created and assigned to a pool with the following non-default configuration:Interval: 7 secondsTimeout: 22 secondsReverse: YesSend String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive String: UpThe HTTP server sends the following response: What is the resulting pool status?

Unavailable (Enabled) Available (Enabled)

A pool with a default connection limit is configured to use Round Robin as the load balancing method. An LTM Specialist needs to ensure that the LTM device selects a server with the fewest number of connections when new clients connect. Another pool is using the same set of backend servers.Which load balancing-method should the pool be changed to?

Weighted Least Connections (node]

Weighted Least Connections (member)

A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.When the 200 status code is received, the pool member should receive No new connections.Which configuration change should be made to meet these requirements?

set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.

set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.

set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.

set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.

set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.

A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLANWhich TMOS command enables this behavior?

tmsh create sys ha-group External trunks add External threshold 2 weight 101)

tmsh modify net van External failsafe enabled

tmsh create sys ha-group External trunks add Externally

tmsh create sys ha-group External trunks add External threshold 2 weight 101)

tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))

Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device.What are the required profile and persistence settings for a standard virtual server?

tcp, ftp - Source address persistence

tcp, ctientsst, ftp serverssl persistence

tcp, clientssl, serverssl persistence

tcp, ftp - Source address persistence

tcp - no persistence profile will be used

An LTM Specialist needs to provide access to a 8BG-IP to device for a company's support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company's Active DirectoryWhich method is appropriate to provide access for the support personnel to the BIG-JP device?

configure remote authentication and map support personnel users to the Guest user role

configure remote authentication for all users with a default user role of Guest

configure remote authentication and map support personnel users to the Guest user role

configure remote authentication and map support personnel users to the Operator user role

configure remote authentication for all users with a default user role of Operator

A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows: Which action should be taken to correct this issue?

create a new virtual server with the service port of 53 and the protocol set to TC

change the profile set on the virtual server To TCP/UDP

change the profile set on the virtual server to TCP

add a TCP prone to the existing virtual server.

F5 301a Practice Test 1 - Free Online Exam Questions 1-40

Question 1 / 40

Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.

Which profile should the LTM Specialist enable to improve virtual server performance?

A WAN optimized client side profile

A FastL4 profile on the virtual server

An HTTP profile for the virtual server

A Stream profile for the remote user networks

Comment (0)

F5 301a Practice Test 1

Question

F5 301a Practice Tests

Practice Tests