An LTM Specialist is configuring a virtual server with an IP address.Which configuration is unsupported?

Performance 14 virtual server with an HTTP profile

Standard virtual server with an HTTP profile

Performance 14 virtual server with a FastHTTP profile

Standard virtual server with a TCP profile

AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client's IP address must be included in the traffic sent to the pool member.What is a complete set of profiles that must be configured for the virtual server to meet these requirements?

TCP, Client SSL, Server SSL, HTTP

A new web application is being deployed Mutual SSL authentication must be used to authenticate clients.Which of the following two tasks must be completed to meet the requirements? (Choose two)

configure the client SSL profile with 'Client Certificate' set to require

configure the client SSL profile with the Trusted .Certificate Authorities

configure the server SSL profile with 'Client Certificate' Set to require

configure the client SSL profile with 'Client Certificate' set to require

instruct the desktop team to update the web browser to the most recent release

generate a CSR to register a certificate with the CA

configure the client SSL profile with the Trusted .Certificate Authorities

An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?

Provision AVR to none. Provision LTM to Dedicated

Provision AVR to Minimum. Provision LTM at Maximum

Provision AVR to none. Provision LTM to Dedicated

Provision AVR to Minimum, Provision LTM to Dedicated

Provision LTM to Dedicated, Provision AVR to Dedicated

An LTM Specialist has noticed in the audit log that there are numerous attempts to log into the Admin account. Theses attempts are sourced from a suspicious IP address range to the Configuration Utility of the LTM device.How should the LTM Specialist block these attempts?

add the permitted source IP addresses to the httpd allow list via tmsh

add the suspicious source IP addresses to the httpd deny list via tmsh

add the suspicious source IP addresses to the httpd deny list via Configuration Utility

add the permitted source IP addresses to the allow list via Configuration Utility

An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.Which settings should the LTM Specialist configure in the client SSL profile?

set the Renegotiate Period to 30 seconds

set the Handshake Timeout to 30 seconds

enable Require Peer SN1 Support

set the Renegotiate Period to 30 seconds

set the Renegotiate Max Record Delay to 30

Exhibit. The three VLANS shown provide connectivity to backend servers. The backend servers are being moved to unmanaged switches and require separate interfaces.How should the F5 device interfaces be configured?

Create VLAN_A move interface 1.1 to untagged. Create VLAN_B move interface 1.2 to untagged. Create VLAN_C move interface 1.3 to untagged.

Create a Trunk interface and combined interface 1.1.1.2 and 1.3.

Create a Trunk interface and select VLANA, VLAN_B. and VLAN_C.

Create VLAN named VLAN_A enter 100 under Tag and move interface 1.1 to tagged Create VLAN_B enter 200 and move interface 1.2 to tagged Create VLAN_C Center 300 and move interface 1.3 to tagged.

Create VLAN_A move interface 1.1 to untagged. Create VLAN_B move interface 1.2 to untagged. Create VLAN_C move interface 1.3 to untagged.

An LTM device configured with a management IP address and route and a series of self-IPs and TMM routes. Both management and TMM have a routing entry for 101 10/24 Application traffic is being load balanced and sent to pool member 10.1.1.123 with SNAT Automap and configured.Which route will the LTM device use?

TMM route regardless of the management port status

both routes, which will duplicate traffic on both management and TMM interface

equal cost multipath load balancing via both routes

management route when TMM interface is down or TMM is offline

management route regardless of the management port status

An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

configure a VLAN and primary mirroring address for mirror traffic

enable Mirroring for a virtual server and persistence profile

configure a serial failover cable for mirror traffic

configure a OneConnect profile to mirror connections

configure a VLAN and primary mirroring address for mirror traffic

enable Mirroring for a virtual server and persistence profile

enable Clone Pools for a virtual server and a persistence profile

A web server's default gateway is the network router. The LTM Specialist needs to introduce an LTM device to load balance to the web servers without changing the server's default gateway.Which deployment method and settings should the LTM Specialist use to ensure correct traffic flow and that the web servers can obtain the actual con IP addresses?

SNAT deployment with automap configured and X-Forwarded-For inserted in HTTP headers

route deployment with Automap configured and X-Forwarded-For inserted in HTTP headers

route deployment without SNAT configuration

SNAT deployment with automap configured and X-Forwarded-For inserted in HTTP headers

SNAT deployment with automap configured

Exhibit. The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.An LTM Specialist disconnects the cable for the HA network in an effort to test failover.Which HA functionality works in this case?

ConfigSync does NOT work; Connection Mirroring works

ConfigSync does NOT work. Connection Mirroring floes NOT work.

ConfigSync works Connection Mirroring works

ConfigSync works. Connection Mirroring docs NOT work

ConfigSync does NOT work; Connection Mirroring works

Refer to the exhibit. An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.Which command sill correct the issue?

{/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip

{/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}

{/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}

{Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}

An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.Which configuration option should the LTM Specialist adjust?

increase the connection limit for pool members

increase the idle Timeout in a custom TCP profile

use a Performance (Layer 4) Virtual Server

An HA pair of LTM devices that load balance multiple HTTPS applications utilizes highly customized RAM Cache and compression profiles on each virtual server. The LTM Specialist who is administering the HA pair regularly observes entines in the log similar to the following:tmm tmm I708S1 011e0002.4. sweeper_update: aggressive mode activated (117504/138240 pages)No DoS attacks arc occurring. No user problems have been reported. Which step should the LTM Specialist take to help mitigate the issue?

change the Adaptive Reaping Low watermark

change the Adaptive Reaping High watermark

change the Adaptive Reaping Low watermark

allocate less memory to the RAM cache feature

F5 301a Practice Test 2 - Free Online Exam Questions 41-80

An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.

TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.

TLS enabled virtual servers utilize certificates based on 2048-bit keys

During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.

What will happen in this scenario?

Become a Premium Member for full access

Unlock Premium Member

F5 301a Practice Test 2

Question

F5 301a Practice Tests

Practice Tests