In vSAN 7.0 U1, when a host enters into maintenance mode (EMM) using the “Ensure Accessibility” option, it will allow vSAN to write to another host in addition to the host holding the object replica.What does vSAN write to that additional host?

A full replica and all incremental updates that happened once the host entered maintenance mode

The stripe from the host entering maintenance mode

All incremental updates that happened once the host entered maintenance mode

A vSAN administrator received the following alert from vRealize Operations Manager:“VMKernel NIC is experiencing high number of dropped packets.”What is the quickest path in vRealize Operations Manager that should be used to further investigate this alert?

Home -> vSphere Optimization Assessment

Environment -> vSAN and Storage Devices

A single capacity disk fails within a vSAN 7.0 U1 cluster running with a “compression-only” configuration enabled. The vSAN administrator must recognize the platform impact that has occurred and take steps to correct it.Which action should the vSAN administrator take?

The hardware failure will only impact the specific capacity disk, so the vSAN administrator will need to remove and replace the failed capacity device.

The hardware failure will impact the entire disk group, so the vSAN administrator will need to remove and recreate the disk group following the replacement of the failed storage device.

The hardware failure will stop the running workloads, so the vSAN administrator will need to disable the compression-only configuration, replace the failed capacity device, and then re-create the disk group.

The hardware failure will impact all disk groups within the ESXi host, so the vSAN administrator will need to manually remove the ESXi node from the vSAN Cluster, replace the failed capacity device, and then re-create the disk group.

The hardware failure will only impact the specific capacity disk, so the vSAN administrator will need to remove and replace the failed capacity device.

A vSAN administrator of a network isolated vSAN environment wants to upgrade the environment from the vSAN 7.0 to the vSAN 7.0 U1 using vLCM.Which option, if any, should be used as a depot in this case?

Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.

Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.

It is not possible to use the vSphere Lifecycle Manager on a network isolated environment.

Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.

Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot usingHTTPS.

A vSphere administrator wants to use vSphere Lifecycle Manager (vLCM) to manage a vSAN cluster with one desired image. When creating the new cluster, the administrator chooses “Manage all hosts in the cluster with a single image”.Which option is NOT available when setting up the cluster image?

Import baseline from vSphere Lifecycle Manager

Import image from an existing host in the vCenter inventory

Import baseline from vSphere Lifecycle Manager

The DevOps team of an organization wants to deploy their new cloud native application with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.Which two requirements must the administrator meet to complete this task? (Choose two.)

Unclaimed disks in the hosts for vSAN Direct

A valid vSAN license for the vSAN cluster

Unclaimed disks in the hosts for vSAN Direct

A dedicated network for vSAN Direct

A valid vSAN license for the vSAN cluster

An integration with vSAN File Services

vSphere HA enabled on the vSAN cluster

An administrator is enabling vSphere HA and vSAN on the same cluster and needs to use a configuration that is valid for vSphere HA Heartbeat datastore.Which configuration should be used?

Any datastore mounted to more than one host, but not a vSAN datastore

A datastore mounted to more than one host, as well as any vSAN datastore

Any datastore mounted to more than one host

Any datastore mounted to more than one host, but not a vSAN datastore

vSAN datastore as vSphere HA Heartbeat datastore

An administrator has been tasked with physically moving the hosts in a vSAN 7.0 U1 cluster to an alternative location. All virtual machines, hosts, and the vCenter Server have need safely powered sown, and the servers have been relocated. Afterwards, the operations engineer needs to bring up the vSAN cluster again.Which action is part of this process?

Exiting Maintenance Mode on each ESXi host using the vSphere Host Client

Powering on each ESXi host from the vSphere Client

Entering Maintenance Mode with no data migration on each ESXi host

Disabling the vCLS retreat mode

Exiting Maintenance Mode on each ESXi host using the vSphere Host Client

A vSAN administrator wants to install a patch on an existing vSAN cluster. The environment runs vSphere 7.0, and the patch contains ESXi 7.0 Update 1c. The vSAN administrator will use vSphere Lifecycle Manager images to add the patch to the proper image and apply it to the vSAN cluster.Which action should be performed before patching the ESXi hosts in the vSAN cluster?

Upgrade the Platform Services Controller.

Create a baseline instead of using images.

An administrator has successfully deployed a new 3-node vSAN Cluster. Prior to deploying any production workloads on to the new cluster, the administrator must complete a number of Service Validation and Testing (SVT) checks.The final check requires the administrator to pull out a disk from one of the vSAN hosts.Which two outcomes will occur within the vSAN cluster following this action? (Choose two.)

All components on the device will be marked as absent.

By default. vSAN will start the rebuilding of affected components immediately.

By default. vSAN will delay the rebuilding of affected components for 60 minutes.

All components on the device will be marked as absent.

By default. vSAN will start the rebuilding of affected components immediately.

By default vSAN will delay the rebuilding of affected components for 30 minutes.

All components on the device will be marked as degraded.

A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of the production workload at all times.Which step should be taken by the administrator to meet this goal?

Enter Maintenance Mode with 'Full Data Migration'

Perform a live vMotion to another host.

Disable the vSAN Service on the VMkernel port.

Enter Maintenance Mode with 'Full Data Migration'

A vSAN administrator observes that the VMware Skyline Health: Time Synchronization displays one host that is noncompliant.What is the meaning of this message?

The vSAN administrator must review the NTP server configuration on vCenter Server and the ESXi hosts.

The vSAN administrator must put the noncompliant host into maintenance mode.

The value of the CLOMRepairDelay parameter is incorrect.

The noncompliant host cannot communicate with vCenter.

A vSAN administrator is tasked to perform an upgrade of a vSAN cluster from 7.0 to 7.0 U2, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?

Select Remediate All through vLCM to upgrade all hosts in the cluster.

Manually remediate one host at a time in the vSAN cluster.

Place all hosts in the vSAN cluster into Maintenance Mode.

Stage the upgrade of the vSAN cluster through vLCM.

An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend. In preparation, the administrator runs the Data Migration Pre-Check.Which two items are being checked? (Choose two.)

Object compliance and accessibility

A newly deployed vSAN cluster runs vSAN 7.0, and the vSAN cluster needs an integration with a third-party software solution. The software solution provides full app-level redundancy, and it runs on the vSAN Data Persistence platform.The administrator configures vSAN Direct Configuration to integrate the third-party storage with vSAN and now needs to configure a storage policy to make sure the vSAN Direct storage is used by the vSAN Data Persistence platform third-party software solution.Which type of storage policy configuration should the administrator use?

A storage policy with tag or capability-based rules for vSAN Direct

A storage policy with capability-based rules for third-party storage

A vSAN shared nothing policy with no data redundancy (FTT=0)

AvSAN storage policy with one failure to tolerate (N 1=1)

All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:Failures to Tolerate (FTT) rule is set to “2 Failures - RAID-1 (Mirroring)”.The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.Which action should the vSAN administrator take to meet this goal?

Change the FTT rule to “1 Failure - RAID-1 (Mirroring)”, and select “Now” for Reapply to VMs.

Add the “Flash read cache reservation” rule to the storage policy, and set to 0%.

Disable Operations reserve and Host rebuild reserve and click “Apply”.

Modify the FTT rule to “2 Failures - RAID-5 (Erasure Coding)”.

A vSAN administrator has been asked to encrypt all traffic for data and metadata across all hosts in a vSAN cluster.Which action is necessary to achieve this level of encryption?

Enable vSAN Data In-Transit encryption at the cluster level. No KMS is required.

Enable vSAN Cluster level encryption via Storage Policy. No KMS is required.

Enable vSAN Data In-Transit encryption at the cluster level. No KMS is required.

Deploy KMS server, and enable vSAN Data at Rest encryption at the cluster level.

Deploy KMS server, and enable vSAN Data at Rest and In-Transit encryption at the host level.

A vSAN administrator is receiving complaints that applications are not performing as expected. The vSAN administrator opens the vSAN cluster performance charts to try to identify the issue, but the vSAN cluster performance charts are not available.Which option should vSAN administrator enable to make these charts available?

vSAN Troubleshooting Diagnostics

A 5-node vSAN cluster contains multiple virtual machines, and a vSAN storage policy with the rule “Failures to tolerate” set to “1 failure - RAID-5 (Erasure Coding)” is assigned. A vSAN administrator has changed the rile in the assigned policy to “2 failures - RAID-6 (Erasure Coding)”.What is the result of this change?

The policy change is rejected immediately.

Changes are queued for 60 minutes.

The policy change is rejected immediately.

The updated policy is serially applied to the virtual machines.

No changes occur until the policy is reapplied.

Which solution can automate the deployment of a vSAN cluster as part of a full Software-Defined Datacenter?

vRealize Suite Lifecycle Manager

What is the purpose of host rebuild reserve in vSAN?

Reserves space in case of single host failure

A remote location was configured with Cloud Native Storage. When the administrator put the host in maintenance mode to perform monthly patching, the File Server Health check was triggered.Which action, if any, should the administrator take to resolve the issue?

It will resolve after 60 seconds, so no action is necessary.

Click the Repair Objects Immediately button in the VMware Skyline Health Checks.

Remove the host from maintenance mode, and put it back with Full Data Migration.

It will resolve after 60 seconds, so no action is necessary.

Modify the repair delay timer to 75.

After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.What are these objects in this category?

There are too may objects to be synchronized.

These objects belong to virtual machines, which are powered off.

Object resynchronization must be started manually.

There are too may objects to be synchronized.

The delay timer has not expired.

Which option, if any, is the default option to enable Maintenance Mode on a vSAN host?

There is no default option. The administrator must select an option.

When viewing the VMware Skyline Health: vSAN Object Health report, the vSAN administrator observes that the link “Repair Objects Immediately” is enabled.What is the meaning of this message?

One or more objects have absent components.

Immediate action must be taken to effect object repair.

One or more objects have become inaccessible.

The repair delay timer has elapsed, and ^synchronization has begun.

The cluster level backend IOPS performance graph shows a higher-than-average number of IOPS for back-end storage.What is a possible reason for this situation?

Data ^synchronization is in progress.

DRS is invoking multiple vMotion migrations.

There is VM storage I/O traffic.

Not enough capacity for slack space is on vSAN datastore.

A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time possible. All virtual machines are assigned a storage policy where the “Failures to tolerate” is set to one or higher.Which strategy should be used to achieve this goal?

Select the *No data migration" maintenance mode option.

Disable de-duplication and compression prior to the upgrade.

Perform a complete update, omitting the on-disk format update.

Select the *No data migration" maintenance mode option.

Update only select, mission-critical clusters.

A vSAN storage policy with the 'Failures lo Tolerate" rule set to "2 failures - RA1D-1 {Mirroring)" is assigned to multiple virtual machines.The vSAN administrator is considering assigning a new vSAN storage policy with the "Failures to Tolerate' rule set lo '2 failures - RAID-6* (Erasure Coding)" to the virtual machines.How will the capacity of the vSAN datastore be affected if this action is taken?

Used capacity will increase temporarily while the erasure coded components are built.

Free capacity is permanently reduced after the Object Repair Timer expires.

Additional capacity is permanently consumed by the erasure coded components.

Used capacity will increase temporarily while the erasure coded components are built.

Additional free capacity will be available for immediate use.

Which two storage policy changes result in a component resync? (Choose two.)

Changing the failure tolerance method

Enabling object checksum (from checksum disabled)

Changing object space reservation to 100

Changing the failure tolerance method

Disabling object checksum (from checksum enabled)

Adding an IOPS Limit rule to a storage policy

Enabling object checksum (from checksum disabled)

A vSAN administrator has been asked to increase the usable storage capacity of an existing vSAN cluster to deploy some new virtual machines containing a large amount of dat a. The details are as follows:• Each ESXi host in the vSAN cluster is configured with two disk groups.• Each disk group contains three capacity devices and one cache device.• Deduplication and compression are not enabled.• Only the default VM storage policy is in use and had not been changed.• Add capacity without re-creating disk groups.The company would like to minimize the number of devices used for cost Optimization.Which action should the vSAN administrator carry out to provide additional storage to the vSAN cluster?

Adding new capacity devices to the existing disk groups

Changing object space reservation on the default storage policy to 100

Adding new capacity devices to the existing disk groups

Deleting and recreating the current disk groups with a larger disk configuration

Creating a third disk group on each host

A vSAN administrator is deploying a four node vSAN cluster to a new work location. To help with configuration and consistency, the vSAN administrator plans to use Ouickstart Which two prerequisites must be met prior to taking this action? (Choose two.)

Hosts are running 6.0 U2 or later.

Hosts do not have existing vSAN or network configurations.

vDS must be created tor vSAN and management traffic.

vCenter is running on one of the four nodes.

Hosts are running 6.0 U2 or later.

Hosts do not have existing vSAN or network configurations.

VMware 5V0-22.21 Practice Test 2 - Free Online Exam Prep & Questions

Question 1 / 40

After a recent data loss event, the IT department plans to deploy a DR site using vSphere Replication with vSAN providing the storage backend.

The architect would like to know how many components will be created based on the following configuration:

2x 100 GB VMDK

RAID 1 vSAN Storage Policy

4x Point in Time snapshots

How many components will be created?

Comment (0)

VMware 5V0-22.21 Practice Test 2

Question

VMware 5V0-22.21 Practice Tests

Practice Tests