An administrator is responsible for managing a five-node vSAN cluster. The vSAN Cluster is configured with both vSphere High Availability (HA) and vSphere Distributed Resource Scheduler (DRS). The vSAN Cluster is currently hosting 150 virtual machines that have consumed 60% of the usable capacity.Each virtual machine belongs to one of the following vSAN Storage Policies:vSANPolicy1:Site Disaster Tolerance: NoneFailures to Tolerate: 1 failure - RAID-5 (Erasure Coding)vSANPolicy2:Site Disaster Tolerance: NoneFailures to Tolerate: No data redundancyFollowing an unplanned power event within the data center, the administrator has been alerted to the fact that one host has permanently failed.What will be the impact to any virtual machine that was running on the failed host using vSANPolicy1?

Each virtual machine must be restored from backup.

Each virtual machine will be restarted on another vSAN host using vSphere HA.

Each virtual machine will be unavailable for up to 90 minutes while the automatic recovery process completes.

vSAN will defer the start of the recovery process for 60 minutes, and the virtual machines will not power on until the recovery process has been completed.

Each virtual machine must be restored from backup.

A vSAN administrator of a non-internet connected vSAN environment wants to upgrade the environment from the vSAN 7.0 U3 to the vSAN 8.0 using vLCM.Which option, if any, should be used as a depot in this case?

It is not possible to use the vSphere Lifecycle Manager on a non-internet connected environment.

Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.

Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.

Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.

It is not possible to use the vSphere Lifecycle Manager on a non-internet connected environment.

Due to a planned power outage, an administrator decides to shut down the vSAN cluster using the Shutdown Cluster Wizard. The administrator starts by checking the vSAN health service to confirm the cluster is healthy and then powers off all virtual machines (VMs) including vCLS VMs.Which step needs to be taken before starting the Shutdown Cluster Wizard?

Place all ESXi hosts into maintenance mode

Disable cluster member updates from vCenter Server

Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

Create uniformly-configured hosts

Disable vSAN performance service

Create uniformly-configured hosts

Disable vSAN performance service

Disable vSphere Cluster Services

Disable vSphere High Availability (HA)

Reference the VMware Compatibility Guide

What are two characteristics of the vSAN Data-At-Rest Encryption (DARE)? (Choose two.)

it is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes.

it continues to operate unaffected during downtime on vCenter Server.

it requires Self-Encrypting Drives in order to work.

it needs to be enabled together with the vSAN Data-In-Transit encryption.

it is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes.

it is not supported on Stretched Cluster environments.

it continues to operate unaffected during downtime on vCenter Server.

A vSAN administrator needs to update vSAN from version 7.0.2 to version 8.0.Which is the correct order to perform the update?

vCenter -> vSphere -> vSAN on-disk format

vSphere -> vCenter -> vSAN on-disk format

vSphere -> vSAN on-disk format -> vCenter

vCenter -> vSphere -> vSAN on-disk format

vSAN on-disk format -> vSphere -> vCenter

A vSAN administrator is responsible for managing a customer's production vSAN cluster that is going to be used to provide SMB file shares to a number of host clients. The vSAN administrator must take action so the performance of all services in the production vSAN cluster can be monitored.Which two services must be enabled for this monitoring to occur? (Choose two.)

vSAN Performance Diagnostic Service

A vSAN administrator has a group of requirements from the application team, which mandates spreading the components across storage devices as much as possible.What should the vSAN Administrator consider to achieve such a requirement for building a new vSAN cluster? (Choose two.)

Enable Force Provisioning in OSA

Create a dedicated Storage Pool in ESA

A site administrator wishes to implement HCI mesh between two clusters on vSAN that are located in geographically separate sites and which are administered within a single datacenter.Which two requirements should the vSAN administrator consider to accomplish this goal? (Choose two.)

Either Layer 2 or Layer 3 communications can be used

The configuration must meet the same latency and bandwidth requirement as local vSAN

Either Layer 2 or Layer 3 communications can be used

A leaf spine topology is required for core redundancy and reduced latency

NIC teaming must be implemented for the vSAN network vmkernel port

The configuration must meet the same latency and bandwidth requirement as local vSAN

Encryption must be disabled prior to configuring HCI mesh

An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized.What has to be done and configured to achieve this goal?

Distribute servers across at least two different racks and configure two fault domains

Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks

Enable deduplication and compression

Distribute servers across at least three different racks and configure three fault domains

An administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any virtual machines that are created are placed in the appropriate site.Which two steps are needed to complete this task? (Choose two.)

Create VM/Host groups for the two sites

Create a storage policy that includes site affinity rules and apply to VMs

Create VM/Host groups for the two sites

Create a single VM/Host group across both sites

Put the VMs in a vSphere DRS group

Put the VMs in the correct VM group

Create a storage policy that includes site affinity rules and apply to VMs

An administrator is tasked to create a Kerberos secured NFS v4.1 file share.Which information is minimally required during the configuration of the File Service?

Active Directory Domain, User Account, Password

Organizational Unit, User Account, Password

Active Directory Domain, User Account, Password

Kerberos Server, User Account, Password

Active Directory Domain. Organizational Unit, User Account. Password

A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page.Why is this situation occurring?

vSAN performance service is not enabled.

The vRealize Operations Manager is not integrated with vSAN cluster.

The administrator has read-only permissions on the cluster level.

vSAN performance statistics are only available via CLI.

vSAN performance service is not enabled.

In which type of environment is vSAN storage used as a mandatory, primary storage?

Tanzu Kubernetes Grid Integrated Edition

All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:Failures to Tolerate (FTT) rule is set to '2 Failures - RAID-1 (Mirroring)'The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.Which action should the vSAN administrator take to meet this goal?

Change the FTT rule to '1 Failure - RAID-1 (Mirroring)', and select 'Now' for Reapply to VMs

Modify the FTT rule to '2 Failures - RAID-5 (Erasure Coding)'

Add the 'Flash read cache reservation' rule to the storage policy, and set to 0%

Disable Operations reserve and Host rebuild reserve and click 'Apply'

Change the FTT rule to '1 Failure - RAID-1 (Mirroring)', and select 'Now' for Reapply to VMs

A vSAN administrator is using the vSAN ReadyNode Sizer to build a new environment. While entering the cluster configurations, a fellow colleague inquires about the Operations Reserve option.What is the purpose of using this option?

Provides space for internal operations

Configures space for external operations

Reserves space for tolerating failures

Allocates space forvSAN uparades

A vSAN administrator has a cluster configured with a Storage Pool that was moved to a new physical DC.Upon checking on the vSAN cluster health status, one of the ESXi hosts has two storage devices in a degraded state and must be replaced.What must the vSAN administrator do to restore the health of the vSAN cluster with minimum risk?

Remove the devices from the storage pool, replace the storage devices, claim the new devices in vSAN

Remove the host from ySAN configuration, replace the faulty disks, re-create the storage pool

Remove the entire storage pool, install the new devices, re-create the storage pool

Remove the host from the cluster, replace the faulty disks, re-add the host to the cluster

Remove the devices from the storage pool, replace the storage devices, claim the new devices in vSAN

The Resyncing Objects view in the vCenter UI reports that some objects are currently resyncing.Which two actions would cause this situation? (Choose two.)

A change to the storage policy is applied to the objects.

A host failure occurs in the cluster

A change to the storage policy is applied to the objects.

DRS is relocating VMs between vSAN nodes.

A host failure occurs in the cluster

HA Virtual Machine Monitoring forced a VM to reboot.

A customer wishes to host a new range of applications with high-performance needs, specifically, low latency.The applications are required to be hosted at company-owned edge locations, each with minimal rack space (three host slots per edge location for this project).Which deployment options would satisfy the customer's needs, while maximizing the amount of capacity available per deployment?

A new three-node vSAN 8.0 All-Flash Cluster with ESA in each edge location Each application VM configured with a RAID-5 VM storage policy

A new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location Each application VM configured with a RAID-5 VM storage policy

A new three-node vSAN 8.0 All-Flash Cluster with OSA in each edge location Each application VM configured with a RAID-1 VM storage policy

A new three-node vSAN 8.0 All-Flash Cluster with ESA in each edge location Each application VM configured with a RAID-1 VM storage policy

A new three-node vSAN 8.0 All-Flash Cluster with ESA in each edge location Each application VM configured with a RAID-5 VM storage policy

An organization plans to implement a new vSAN 8.0 cluster to take advantage of the new features around improved I/O flow, better resiliency, and more efficient disk usage. The vSAN ReadyNodes available for the cluster consist of eight NVMe disks.How should the organization configure the disk layout?

Use vSAN ESA and the new Storage pool configuration where all disks contribute to capacity

Use vSAN OSA and create two disk groups with one cache disk and three capacity disks each

Use vSAN ESA and the new Storage pool configuration where all disks contribute to capacity

Use vSAN OSA and the new Storage pool configuration where all disks contribute to capacity

Use vSAN ESA and create two disk groups with one cache disk and three capacity disks each

A six-node vSAN ESA cluster contains multiple virtual machines, and a vSAN storage policy with the rule 'Failures to tolerate' set to '1 failure - RAID-5 (Erasure Coding)' is assigned. A vSAN administrator has changed the rule in the assigned policy to '2 failures - RAID-6 (Erasure Coding)'.What is the result of this change?

The updated policy is serially applied to the virtual machines.

No changes occur until the policy is reapplied.

The changes are queued for 60 minutes.

The policy change is rejected immediately.

The updated policy is serially applied to the virtual machines.

A vSAN administrator has two identical VMware vSAN clusters, one for staging workloads and another for production workloads. Due to an unforeseen capacity requirement, the vSAN administrator is tasked with merging the staging vSAN cluster into the production.Which three actions should the vSAN administrator perform on the staging cluster prior to moving the vSAN nodes to the production cluster? (Choose three.)

Delete all partitions from the capacity disks

Mark the disks for partial reservation

A customer wants to validate if Skyline online health is working for vSAN and finds out that Skyline is not fully configured yet.What two requirements must be met to make sure that Skyline online health will work? (Choose two.)

Enable CEIP and join the program

Have a working Internet connection

Add the Skyline license into Virtual Center

Enable Skyline Health on the vSAN Cluster

Enable CEIP and join the program

Have a working Internet connection

Have vCenter on version 7 or higher

An administrator has been tasked with upgrading existing vSAN OSA cluster hosts with a SSD cache device per host to a NVMe device (hot plug).Which fact should guide the administrator's action?

The disk group must be deleted on each physical host in the vSAN OSA cluster to use the NVMe device.

The disk group does not need to be removed before adding new cache.

The host must be removed from vSAN OSA cluster before changing cache devices.

The cache disk drives must have a larger capacity.

An administrator must choose between deploying a virtual witness or a physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.What is a benefit of selecting this approach?

Increased vSAN datastore capacity

Shared metadata between separate clusters

Additional compute capacity for running VMs

A three-node vSAN OSA cluster with business critical intensive I/O workload is running out of capacity. Each host consists of five disk groups with four capacity disks. The administrator needs to expand the capacity of the vSAN datastore as soon as possible.What should the administrator do?

Add additional capacity disks to each disk group

Enable Deduplication and Compression on the cluster level

Add additional capacity by adding a disk on one host and creating a storage pool

Add additional capacity by adding a vSAN ReadyNode to the cluster

Add additional capacity disks to each disk group

An administrator is deploying a new two-node vSAN cluster with a shared witness to a remote location.Which requirement must be met?

The ESXi host's controller cache and advanced features must be disabled.

The ESXi hosts must have SSDs or NVMe configured for Virtual Flash File System.

The ESXi host's controller cache and advanced features must be disabled.

The ESXi host's drives must be configured in RAID 1 to support Failures to Tolerate of 1.

The ESXi hosts must have a minimum of 64 GBs of memory.

An administrator is troubleshooting a vSAN performance issue. In the vSAN performance monitor there is a high latency on the vSAN cluster.What is a possible cause of this?

Jumbo frames are not enabled on the VMkernel adapters.

The Virtual Machines are using PVSCSI controllers.

Erasure Coding is disabled in the storage policy.

There is congestion in one or more disk groups.

Jumbo frames are not enabled on the VMkernel adapters.

vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one storage policy, but the administrator did not explicitly assign a storage policy when provisioning the new VM.What is the result of this situation?

The VM objects will be protected based on the vSAN Default Storage Policy configurations.

The vSphere Web Client will choose the last vSAN Storage Policy used.

No data protection will be applied to the VM objects.

VMware 5V0-22.23 Practice Test 1 - Free Online Exam Prep & Questions

What is the minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring)?

3 hosts

4 hosts

6 hosts

Comment (0)

VMware 5V0-22.23 Practice Test 1

Question

VMware 5V0-22.23 Practice Tests

Practice Tests