A vSAN administrator needs to enable vSAN ESA.Which two requirements need to be met? (Choose two.)

vSAN Build Your Own configuration

What are two prerequisites for using the TRIM and UNMAP capability of vSAN? (Choose two.)

The vSAN cluster is an all-flash architecture.

The VM quest operating system supports ATA TRIM or SCSI UNMAP capability

Deduplication and compression are enabled.

The vSAN cluster is an all-flash architecture.

The VM quest operating system supports ATA TRIM or SCSI UNMAP capability

Change the Object Space Reservation to 100.

A vSAN administrator is tasked to perform an upgrade of a vSAN cluster, including firmware and drivers for its hardware. The vSAN administrator already created an image using vSphere Lifecycle Manager (vLCM).Prior to selecting Start Remediation, which step should be taken to upgrade the complete vSAN cluster as a single task?

Select Remediate All through vLCM to upgrade all hosts in the cluster

Place all hosts in the vSAN cluster into Maintenance Mode

Stage the upgrade of the vSAN cluster through vLCM

Manually remediate one host at a time in the vSAN cluster

An existing vSAN OSA cluster has this specification:Four ESXi hosts with all flash configurationEach with two disk groupsEach disk group with one cache device and four capacity devicesThere are five more device slots available per hostThe CTO would like to provision new applications, and these will need more capacity and performance.Which two methods should be used by the vSAN administrator to meet this goal with the least amount of impact? (Choose two.)

Adding one more disk group per host with the same configuration

Adding an ESXi host with identical device configuration

Replacing all capacity devices with a similar larger device

Replacing all cache devices with a larger device

Adding one more disk group per host with the same configuration

Adding an ESXi host with identical device configuration

A customer has deployed a new vSAN cluster with the following configuration:5 x vSAN ReadyNodesAll Flash12 TB Raw StoragevSAN 8 is deployed with ESA.New VMs are configured with a RAID-5 VM policy.Which statement is accurate?

vSAN will spread the components across all of the disk groups

vSAN will use a 2+1 RAID-5 data placement scheme with parity will be used

RAID 5 will provide an FTT=2 level of protection in this case

vSAN will use a 4+1 RAID-5 data placement scheme with parity will be used

vSAN will spread the components across all of the disk groups

After a planned power outage, an administrator decided to restart the vSAN cluster manually.What is the correct sequence of steps for the administrator to follow after powering on the ESXi hosts?

1. Enable cluster member updates from vCenter Server only on one ESXi host. 2. Run the python reboot helper script only on one ESXi host to recover the cluster. 3. Exit all hosts from maintenance mode.

1. Exit all hosts from maintenance mode. 2. Run the python reboot helper script only on one ESXi host to recover the cluster. 3. Enable cluster member updates from vCenter Server on all ESXi hosts.

1. Exit all hosts from maintenance mode. 2. Enable cluster member updates from vCenter Server only on one ESXi host. 3. Run the python reboot helper script only on one ESXi host to recover the cluster.

1. Enable cluster member updates from vCenter Server on all ESXi hosts. 2. Run the python reboot helper script on all ESXi hosts to recover the cluster. 3. Exit all hosts from maintenance mode.

After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.Why are there objects in this category?

The delay timer has not expired.

These objects belong to virtual machines, which are powered off.

Object resynchronization must be started manually.

There are too many objects to be synchronized.

A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

Add an individual component to the vLCM image that has the updated NIC driver

Make sure the vLCM image is configured to use the most recent version of the Vendor Add-on

Add an individual component to the vLCM image that has the updated NIC driver

Remove the Vendor Add-on from the vLCM image, and then manually install the network driver on the servers

Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver

A vSAN administrator encounters a non-compliant virtual machine and the compliance status of some of its objects is noncompliant. vSAN is able to locate a full replica of 55% of the votes for the noncompliant objects.What will vSAN do with the virtual machine?

Mark the virtual machine as compliant and automatically recover the noncompliant objects

Mark the virtual machine as inaccessible as vSAN is not able to locate more than 60% of the votes for the objects

Mark the virtual machine as orphaned

An administrator has to perform maintenance on one of the hosts in a three-node vSAN Cluster.Which maintenance mode option will give the administrator the best availability for the VMs with the least effort and data transfer?

Migrate all VMs and their storage from the host to a different storage system

Migrate all VMs and their storage from the host to a different vSphere cluster

A customer has deployed a new vSAN Cluster with the following configuration:vSAN 8 is deployed with ESA.VMs are configured with a RAID-5 VM policy.During failure testing, before the new platform is placed into production one of the ESXi hosts is made unavailable.Which RAID-5 data placement schemes will vSAN use with this failure condition?

The data components on the hosts will be marked as degraded

vSAN can protect the platform using adaptive RAID 5 if the ESXi host fails to return

VMware HA will migrate the storage objects to another node in the cluster

Some VM data will be unavailable until the failed ESXi host is recovered

The data components on the hosts will be marked as degraded

A host in a vSAN stretched cluster goes offline during an unplanned event.Which action will be triggered from AQC on the vSAN cluster?

AQC will recalculate the quorum on an object.

AQC will trigger a vMotion of VMs that went offline.

AQC will restart the VMs that went offline.

AQC will recalculate the quorum on an object.

When adding a disk to a host that was previously used in a decommissioned vSAN cluster the intended disk does not show among the available devices in disk management.Which action should be taken prior to assigning the disk on disk management?

Create a 1GB metadata partition

A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.What is the fastest approach?

Use a Host Profile that was extracted from an existing host

Run vim-cmd to capture, and apply the configuration from an existing host

Launch Quickstart to Add Hosts to a vSAN Cluster

Clone the ESXi boot partition to all new hosts, since the hardware is identical

Use a Host Profile that was extracted from an existing host

A vSAN administrator has an existing cluster where each ESXi host has the following:Disk group #1 with one cache device and three capacity devices.Disk group #2 with one cache device and two capacity devices.What must the vSAN administrator do to expand disk group #2 to have three capacity devices?

Add the new capacity device to the disk group and vSAN will automatically rebalance

Create a new disk group with a single capacity device and then migrate the existing capacity devices

Add the new capacity device to the disk group and vSAN will automatically rebalance

Put the entire ESXi host in maintenance mode, evacuate all data, then add the new capacity device

Put the disk group in maintenance mode, evacuate all data, then add the new capacity device

Which two considerations should an architect assess when designing a HCI Mesh solution with VMware vSAN and VMware vSphere High Availability (HA)? (Choose two.)

A server vSAN cluster can serve its local datastore up to five client vSAN clusters.

A client cluster can mount up to ten remote datastores from one or more vSAN server clusters.

A server vSAN cluster can serve its local datastore up to five client vSAN clusters.

A client cluster can mount up to ten remote datastores from one or more vSAN server clusters.

A minimum of three nodes are required within the client cluster for vSphere HA to work

If vSphere HA is to work with HCI Mesh, Datastore with Permanent Device Loss (PDL) must be confiqured to Power off and restart VMs.

If vSphere HA is to work with HCI Mesh, Datastore with All Paths Down (APD) must be configured to Power off and restart VMs.

An administrator wishes to prevent vCenter notifications of vSAN Health status during a scheduled maintenance window.Which action can be taken to achieve this goal?

Disable the alarm from the HTML client

Disable the performance service

Disable the alarm from the HTML client

Run performance diagnostics prior to scheduled maintenance

A vSAN administrator has recently upgraded a vSAN cluster to 8.0 OSA and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.Which scenario would prevent this feature from operating properly?

The used space on vSAN datastore exceeds the suggested host rebuild threshold.

Underutilized space is above 25-30% of the total capacity threshold.

The used space on vSAN datastore exceeds the suggested host rebuild threshold.

The used space on vSAN datastore exceeds the suggested slack rebuild threshold.

The physical disk has reached an 80% full reactive rebalance threshold.

The vSphere Client reports that the state of some components stored on the vSAN datastore are in the reconfiguring state.Which situation causes components to enter this state?

The applied storage policy is modified.

A host in the cluster enters maintenance mode.

The cluster is recovering from a vSAN failure.

The applied storage policy is modified.

Additional storage capacity is added to the cluster.

An administrator is performing maintenance on the hosts in a four-node vSAN cluster and has selected the 'Ensure Accessibility' maintenance mode option. All VMs are running with the Default Storage Policy which has not been modified from the default settings.While one of the hosts in the cluster is down for firmware upgrade, a second host suddenly loses network connectivity to the remaining hosts.How will the cluster be affected?

All VMs in the cluster will be inaccessible

Cluster will still be fully operational

All VMs in the cluster will be inaccessible

The backend performance metrics will be lost

Refer to the exhibit.An administrator uses SSH to log into a vSAN ESA host and runs the esxcli vsan debug object overview command. The administrator notices the Healthy Components column, the last column, is reporting some components are not in a fully healthy state.What could cause this behavior?

One host is in maintenance mode with ensure accessibility.

New physical disks have been claimed and a rebalance operation is underway.

The applied Storage policy has been updated.

New VMDKs have been added to multiple VMs, but the storage policy has not finished applying.

One host is in maintenance mode with ensure accessibility.

The DevOps team of an organization wants to deploy with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.Which two requirements must the administrator meet to complete this task? (Choose two.)

A valid vSAN license for the vSAN cluster

Unclaimed disks in the hosts forvSAN Direct

A valid vSAN license for the vSAN cluster

A dedicated network for vSAN Direct

An integration with vSAN File Services

Unclaimed disks in the hosts forvSAN Direct

A vSAN administrator is planning to deploy a new vSAN cluster with these requirements:Which two actions should be taken to configure the new vSAN cluster to meet these requirements? (Choose two.)

Create static routes between the vSAN hosts

Use IOPS Limit rules in storaqe policies

A customer wishes to host a new range of applications with high-performance requirements, specifically, low latency. The current vSAN platform is based on ReadyNode hardware and uses a vSAN 7.0 U2 hybrid topology configuration.Which would satisfy the customer's requirement?

Deploy the application on a new cluster with vSAN 8.0 ESA using a new hardware design

Deploy the new applications on the existing cluster with a RAID-6 VM storage policy and an additional stripe width of 4

Deploy the application on a new cluster with vSAN 8.0 OSA using the existing hybrid configuration

Perform an in-place upgrade from vSAN 7.0 U2 OSA to vSAN 8.0 ESA

A vSAN administrator receives a request from the application team to create a virtual machine on a vSAN datastore. The requirements state that the virtual machine needs to be available quickly after a failure occurs. The solution must minimize administrative effort.Which vSphere feature should the vSAN administrator implement?

vSphere Distributed Resource Scheduler

What is the purpose of host rebuild reserve in vSAN?

Reserves space in case of single host failure

Reserves space for internal operations

Reserves space in case of single host failure

During yesterday's business hours, a cache drive failed on one of the vSAN OSA nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of the data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.Which set of steps should the vSAN administrator take?

Remove the existing vSAN disk group and physically replace the device. Then check to verify that the ESXi host automatically detects the new device Afterwards manually recreate the Disk Group

Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.

Remove the existing vSAN disk group and physically replace the device. Then check to verify that the ESXi host automatically detects the new device Afterwards manually recreate the Disk Group

Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.

VMware 5V0-22.23 Practice Test 2 - Free Online Exam Prep & Questions

A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.

Which action should the vSAN administrator take?

Become a Premium Member for full access

Unlock Premium Member

VMware 5V0-22.23 Practice Test 2

Question

VMware 5V0-22.23 Practice Tests

Practice Tests