When determining the Journal volume size, which factors must be considered?

Rate of change, application data type to be replicated, and the number of snapshots to retain

Rate of change, percentage of sequential writes, and the RPO/RTO

Rate of change, application data type to be replicated, and the number of snapshots to retain

Synchronous or asynchronous replication, RPO/RTO, and the network type

Number of snapshots to retain, rate of change, and the number of RPAs

A company is implementing a total of four VNXs; two at their production site and two at their disaster recovery site. In addition, the company wants to manage all clusters as one RecoverPoint system.When installing the RecoverPoint cluster, what should be selected in the RecoverPoint Deployment Manager wizard?

RecoverPoint with VNX Installer

RecoverPoint with VNXe Installer

RecoverPoint with VNX Installer

RecoverPoint Installer followed by Converter to convert to RecoverPoint/EX

A company's host systems are configured with iSCSI HBAs and they want to directly attach the RPAs to a VNX. Which configuration will meet this requirement?

RPAs physically connected to each other through both their iSCSI ports

RPAs cannot be physically connected to each other

RPAs physically connected to each other through both their iSCSI ports

RPAs physically connected to each other through their WAN ports

RPAs physically connected to each other through their FC ports

When are new RecoverPoint licenses added to a new cluster?

During the Deployment Manager 'Prepare New Cluster for Connection' step

After the Deployment Manager 'Connection' steps are completed

Before the Deployment Manager Installer has started

During the Deployment Manager 'Prepare New Cluster for Connection' step

During the Deployment Manager Installer 'Apply Configuration' step

You are deploying RecoverPoint and need to configure zoning for a Brocade switch. How can the RPA WWNs / PWWNs be retrieved?

Log into each RPA with boxmgmt user and gather the information from the SAN Diagnostics menu

Log into RecoverPoint Management IP with admin user and run get_initiators

Start Deployment Manager and allow Deployment Manager to automatically configure the zones

Log into RecoverPoint Management IP with admin user and run get_system_settings

Log into each RPA with boxmgmt user and gather the information from the SAN Diagnostics menu

A RecoverPoint administrator is implementing a RecoverPoint/EX cluster using a VNX splitter. The zoning between the RPAs and the VNX ports is completed and the RPAports are available in the connectivity status on the VNX.What is the next step to complete?

Create a storage group on the VNX for RecoverPoint

Each RPA port should be manually registered with the VNX

Create a LUN on the VNX for RecoverPoint

Add the RPAs to the storage groups

Create a storage group on the VNX for RecoverPoint

A company has an existing RecoverPoint configured for replication and now wanted to add an RPA node to the existing cluster. What is the impact on the existing replication while adding the RPA node?

RPA nodes can be added non-disruptively

Consistency Groups need to be re-configured

RPA nodes can be added non-disruptively

You complete the installation of a RecoverPoint with VNX(SE) system with two clusters. The company's storage administrator wants to know how to add an additional cluster at their new data center.Which information should be provided to the administrator?

Install the new RecoverPoint/EX cluster Add the license to the new cluster Connect the new cluster to the existing system

Install the new RecoverPoint/EX cluster Connect the new cluster to the existing system

Convert the existing system to RecoverPoint/EX Install the new RecoverPoint/EX cluster Connect the new cluster to the existing system

Convert the new RecoverPoint/EX cluster Add the license to the new cluster Connect the new cluster to the existing system

When manually registering each RPA initiator with the VNX, what is the required configuration?

Initiator Type - RecoverPoint Appliance Failover Mode - 4 (ALUA)

Initiator Type - RecoverPoint Appliance Failover Mode - 3 (Passive Ready)

Initiator Type - RecoverPoint Appliance Failover Mode - 4 (ALUA)

Initiator Type - RecoverPoint Appliance Failover Mode - 0 (LUN Based)

Initiator Type - SGI Failover Mode - 4 (ALUA)

A RecoverPoint storage administrator needs to protect a mission-critical application. The application is stored on three volumes provisioned from a new VNX. Once theConsistency Group is created for the application, how many replication sets will the group contain?

Determined by the number of copies

A service provider is implementing a VMAX splitter with four RPA RecoverPoint/EX clusters. How should the RPA and the host FC ports be zoned, and the LUNs masked?

AIl RPA FC ports must be zoned and masked to the same FA ports as the hosts

AIl RPAs must be zoned and masked to different FA ports as the hosts

Only RPA 3 and RPA 4 must be zoned and masked to the same FA ports as the hosts

Only RPA 1 and RPA 2 must be zoned and masked to the same FA ports as the hosts

AIl RPA FC ports must be zoned and masked to the same FA ports as the hosts

What is required to add a local copy to a Consistency Group that already contains one remote copy?

Sufficient local copy licensed capacity on the production cluster

Write splitter type at the production cluster must be the same type as the remote copy

RecoverPoint license type must be RecoverPoint/CL

RecoverPoint system must be RecoverPoint with VNX(SE)

Which ports are required for proper communication between Deployment Manager and the RecoverPoint Appliances?

TCP 21, 22, 80, 443, and UDP 53

What is a characteristic of a cluster that is running on RecoverPoint 5.0 or later?

If the WAN and LAN are on different network adapters, they must be on different subnets

If the WAN and LAN are on different network adapters, different subnets are optional

If the WAN and LAN are on different network adapters, they must be on the same subnets

WAN and LAN traffic cannot be on the same network adapters

A system administrator wants to configure a RecoverPoint cluster and the required Repository volume created on a VNX accessible by all RPAs. However, the Repository volume is not visible in Deployment Manager to continue the RecoverPoint cluster configuration.What is a possible reason for this situation?

Volume is configured as a private LUN

Volume is configured as with FAST disabled

Volume is configured as a Thick LUN

Volume is configured as a Thin LUN

Volume is configured as a private LUN

While running the Deployment Manager Installer for a new cluster with two RPAs, you discover that one RPA is running a different version. Which action is required to resolve this issue?

Ensure that all RPAs are running on the same version and then retry the failed step

Download a new version of Deployment Manager supporting a lower RecoverPoint version found on the RPA

Ensure that all RPAs are running on the same version and then retry the failed step

Continue the cluster installation and once finished, perform a RecoverPoint code upgrade

Continue running Deployment Manager and on the 'Update RecoverPoint Release' step, select the required code version

Where and for which purpose should the rp_import-certificate command be issued?

VPLEX CLI - to obtain management, installation, and integration information about volume types

Deployment Manager - to set up credentials

RecoverPoint CLI - to obtain management, installation, and integration information about volume types

RecoverPoint and VPLEX - to obtain management, installation, and integration information about volume types

VPLEX CLI - to obtain management, installation, and integration information about volume types

A company is deploying a physical RPA cluster to protect a Unity array. Which requirement must be verified prior to running the Deployment Manager, RecoverPoint with Unity Installer wizard?

Unity RecoverPoint write splitter is enabled

RPA FC ports are not zoned to the Unity synchronous replication ports

RecoverPoint with VNX(SE) license is installed on the Unity system

Unity RecoverPoint write splitter is enabled

CHAP secrets are configured for the Unity iSCSI ports

Refer to the exhibit. Based on the exhibit, what is the outcome when the 'Collect System Information' button is clicked?

A log collection covering 2 hours before and 2 hours after the selected event will start

A log collection covering only the selected event will start

A log collection covering 10 minutes before and 10 minutes after the selected event will start

A log collection covering 2 hours before and 2 hours after the selected event will start

A log collection covering 10 minutes before and 10 minutes after the current local time will start

A company has a RecoverPoint with VNX(SE) cluster with local replication connected to a VNX array. They want to replace the VNX array with a Unity 600F array. AllLUNs from the previous storage will be deleted and new ones will be created in the new storage.What changes need to be performed in the RecoverPoint cluster?

Add a new Local Replication license using the Unity Serial number

Convert RecoverPoint with VNX(SE) to RecoverPoint/EX and add a new Local Replication license using the Unity Serial number

Add a new Local Replication license using the Unity Serial number

RecoverPoint automatically recognizes the Unity array; no new licenses are required

Replace old the Local Replication license for a new one using the Unity Serial number

You are installing a new Gen 6 RecoverPoint Appliance (RPA). After completing the physical installation, you log into the RPA for the first time using the 'boxmgmt' account.How can the RecoverPoint version running on the RPA be determined?

Running the get_version command

Obtained using the Diagnostics menu

Obtained using the Installation menu

Running the get_version command

Displayed in the opening view after login

Refer to the exhibit. Based on the exhibit, what describes the state in which RPA-3 must be in prior to selecting 'Next' to advance the wizard?

Powered on and configured with the displayed LAN address

Powered on and configured with the displayed WAN address

Connected to the SAN with storage provisioned

Attached to the displayed RecoverPoint cluster

When the admin user password has been lost, how can the password be reset?

Log into the CLI using boxmgmt and then run the set_user name=admin password= command

Reboot the appliance from DVD and then select 'password recovery' from the GRUB menu

Log into the CLI with the security role and then run the set_user name=admin password= command

Log into the boxmgmt menu, select Diagnostics => Advanced Diagnostics => Run Internal Commands => and then run the passwd admin command

A company decided to change their VNX environment from MirrorView to RecoverPoint with VNX(SE) as a disaster recovery solution. They initially planned to purchase four RPAs at each site to replication between Sites A and B. However, to ensure the company uses their large server inventory, management plans to change from physical RPAs to vRPAs.What effect do their plans have on the license procurement?

Licensing remains same; no action required

An advanced RecoverPoint license is needed

An additional RecoverPoint with VNX(SE) license is needed

Licensing remains same; no action required

A RecoverPoint/EX license is needed

An administrator ran the capture load command on a RecoverPoint cluster during a high-load issue. However, the administrator forgot to capture the output. Where can the RecoverPoint Cluster Load report be located?

https://Cluster_Management_IP/info/long_term_statistics

In the output from the events_log

In the output from running the Collection System Information wizard

https://Cluster_Management_IP/info/load_balancing/

What is the maximum number of copies that RecoverPoint can maintain?

RecoverPoint EX/CL: 1 production copy + up to 6 replicated copies

RecoverPoint with VNX(SE): 1 production copy + up to 2 replicated copies

RecoverPoint EX/CL: 1 production copy + up to 2 replicated copies

RecoverPoint with VNX(SE): production copy + up to 4 replicated copies

In order to perform dynamic resizing of a replication set, what is a requirement?

Both production and the copies must be provisioned from an XtremlO array

Both production and the copies must be provisioned from a VPLEX array

Both production and the copies must be provisioned from an XtremlO array

Copy must be provisioned from an XtremlO array; the production can be on any supported array

Production must be provisioned from an XtremlO array; the copy can be on any supported array

A Consistency Group contains a production and a remote copy. Both are provisioned from XtremlO arrays. Where are the snapshots that represent the point-in-time images kept during normal replication?

In the Journal pool on the XtremlO array containing the production volume

In the Journal pool on the XtremIO array containing the copy volume

On the XtremlO array containing the production volume

In the Journal pool on the XtremlO array containing the production volume

On the XtremlO array containing the copy volume

DELL D-RP-DY-A-24 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

During the Deployment Manager wizard, the system confirmed errors detected on one or more new RPAs. You resolve the errors and proceed to the zoning step.

Which step detected the errors?

Apply Configuration Results

Configure New RPA

Summary

Add New RPA

Comment (0)

DELL D-RP-DY-A-24 Practice Test 1

Question

DELL D-RP-DY-A-24 Practice Tests

Practice Tests