Regarding the telnet management of AC6605, the following statement is wrong ().

telnet can be authenticated based on user name and password, and the transmission is encrypted, so it is quite safe

telnet is a way to remotely manage AC

The telnet service is turned off by default on the AC

telnet service can be configured separately on the wired side and wireless side of AC

telnet can be authenticated based on user name and password, and the transmission is encrypted, so it is quite safe

The following about SSID The statement is wrong ().

One AP Configurable SSID There is no limit to the number

One AP Can release multiple different SSID

Multiple AP Can release the same one on SSID

One AP Configurable SSID There is no limit to the number

One AP Can release the same SSID Signal

Which of the following options are the basic functions of configuring Huawei wireless controllers ()? (Select 3 Answers)

Configuration AC of WLAN Source interface

The wireless LAN architecture is mainly divided into controller-based thin

True AP Architecture and traditional independent fat AP Architecture.

The following is for thin AP Is the description correct ()?

thin AP Cannot be configured separately, must be used in conjunction with the wireless controller

thin AP Also known as wireless router

thin AP Because of lack of function, is gradually getting fat AP replace

thin AP Cannot be configured separately, must be used in conjunction with the wireless controller

thin AP can be realised 802.1X Authentication, encryption and other functions, others such as QoS, Roaming functions are implemented on the wireless controller

for CAPWAP Agreement, the error described below is ().

thin AP Transmission protocol with wireless client

AC And thin AP Transfer protocol

thin AP Transmission protocol with wireless client

Depend on CAPWAP Working group development CAPWAP

The formulation of the agreement has absorbed the useful features of other agreements

The following description about dual-link backup networking is incorrect ()

exist AP With active and standby AC In the process of establishing active and standby links, the link established first must be the active link

Dual-link backup technology improves network reliability at important network nodes and ensures business stability

Prepare AC Always be in the power-on state

exist AP With active and standby AC In the process of establishing active and standby links, the link established first must be the active link

Active and standby AC The network service configuration on the Internet must be consistent

Which of the following descriptions of management VLAN is correct is ().

Responsible for the establishment of the CAPWAP tunnel between AC and AP

Mainly responsible for transmitting data when WLAN users go online

PVID VLAN under the WLAN ESS interface

Service VLAN under the service set template

Responsible for the establishment of the CAPWAP tunnel between AC and AP

For the following WLAN networking configuration, which statement is correct ().(Select 3 Answers)

The user tries his best to ensure that the planning data is detailed when planning the data, which will greatly facilitate the later configuration

Before sending the configuration to the AP, the AP must be online

The WMM template is bound to the RF template

The user tries his best to ensure that the planning data is detailed when planning the data, which will greatly facilitate the later configuration

Before sending the configuration to the AP, the AP must be online

Configure the WMM template can be directly bound to the antenna

The WMM template is bound to the RF template

Which of the following commands connect Huawei to the switch

interface GigabitEthernet 0/0/1 port link-type access GE 0/0/1 Port added to VLAN100 middle()? port default VLAN 100

interface GigabitEthernet 0/0/1 port link-type access port allow-pass VLAN 100

interface GigabitEthernet 0/0/1 port link-type trunk trunk allow-pass VLAN 100

interface GigabitEthernet 0/0/1 port link-type trunk VLAN 100

An examination AP What is the command of the running system version ()?

display ap update all Yes AP of ID Numbering ) Yes AP of ID Numbering )

According to the following output, the following statement is correct ().<Quidway> display deviceAC6605-26-PWR's Device status:Slot Sub Type Online Power Register Status Role-----------------------------------0-AC6605-26 Present PowerOn Registered Normal MasterPOWER Present PowerOn Registered Normal NA(Select 2 Answers)

The user is currently operating on the wired side of the AC

To implement the related configuration of WLAN, the user must first switch to the wireless side by CTRL+Ypass

The user is currently operating on the wired side of the AC

The user is currently operating on the wireless side of the AC

According to the output, it can be concluded that the AC6605 uses a POE power supply module

To implement the related configuration of WLAN, the user must first switch to the wireless side by CTRL+Ypass

According to the following configuration example, the following statement is correct ().[AC] dhcp enable[AC] interface VLANif100[AC-VLANif100] ip address 10.1.100.1 24[AC-VLANif100] dhcp select interface[AC-VLANif100] quit

If VLAN100 is a user VLAN, after the user receives the address, the gateway is 10.1.100.1 and the mask is 255.255.255.0

The DHCP service is already enabled by default in the global mode, so dhcp enable does not need to be configured

The dhcp select interface command is to enable the DHCP client function on the VLAN 100 interface

If VLAN100 is a user VLAN, after the user receives the address, the gateway is 10.1.100.1 and the mask is 255.255.255.0

If VLAN100 is the management VLAN where the AP is located, the option 43 field in the DHCP message that the AP will receive should be 10.1.100.1

If you want to create an open authentication security template, the following correct configuration is ().

AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wep authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wep [AC-WLAN-sec-prof-security-1] quit

AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] open authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy open [AC-WLAN-sec-prof-security-1] quit

AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wep authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wep [AC-WLAN-sec-prof-security-1] quit

AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wpa authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wpa [AC-WLAN-sec-prof-security-1] quit

AC-WLAN-view] security-profile name security-1 id 1 [AC-WLAN-sec-prof-security-1] wpa2 authentication-method open-system [AC-WLAN-sec-prof-security-1] security-policy wpa2 [AC-WLAN-sec-prof-security-1] quit

when AC Only one interface is connected to the aggregation layer switch, and the user traffic is directly out of the public network through the aggregation layer switch, and the networking mode that does not flow through should be (). AC At this time

Bypass mode + direct forwarding

Bypass mode + tunnel forwarding

Bypass mode + direct forwarding

Direct connection mode + tunnel forwarding

Direct connection mode + direct forwarding

service-set What are the options that can be configured under ()? (Select 3 Answers)

able to pass ssid xxxx Configuration SSID String

Can call wlan-ess Interface and configuration service-vlan

The forwarding mode can be configured as direct-forward or tunnel-forward

able to pass ssid xxxx Configuration SSID String

Can call wlan-ess Interface and configuration service-vlan

The forwarding mode can be configured as direct-forward or tunnel-forward

AC6605 supports three ways to establish AP and AC intercommunication, what are the differences ()?(Select 3 Answers)

Automatically discover the AP and go online normally

Automatically discover AP and confirm to go online

Automatically discover the AP and go online normally

Automatically discover AP and confirm to go online

Find APs through multicast and go online automatically

about AP6610DN , The following statement is wrong ().

AP6610 Only one Ethernet interface, the highest bandwidth 1000M

AP6610DN Is enhanced outdoor AP

AP6610DN Is dual frequency AP,in 5GHz Frequency band can be used for wireless bridging and user access

AP6610 Only one Ethernet interface, the highest bandwidth 1000M

AP66010DN Support both Ethernet interface and optical fiber interface

Regarding the functional characteristics of AP6010SN, which of the following statements is correct is ().(Select 2 Answers)

AP6010SN has an Ethernet interface and supports 802.3af PoE power supply standard

AP6010SN supports WDS function, which can realize point-to-point and point-to-multipoint wireless bridging

AP6010SN is an indoor distributed AP, which only supports working in the 2.4GHz frequency band

AP6010SN has an Ethernet interface and supports 802.3af PoE power supply standard

AP6010SN supports WDS function, which can realize point-to-point and point-to-multipoint wireless bridging

AP6010SN not only has a built-in antenna, but also an external antenna, which is very convenient

Huawei H12-311_V3.0 Practice Test 4 - Free Online Exam Questions 121-160

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

Huawei H12-311_V3.0 Practice Test 4

Question

Huawei H12-311_V3.0 Practice Tests

Practice Tests