ExamGecko
Home Home / Huawei / H13-611

Huawei H13-611 Practice Test - Questions Answers, Page 53

Question list
Search
Search

Which statements are true about the functions of HyperClone? (Select All that Apply)

A.
When the source LUN fails, service data can be recovered from any point in time before the fault occurred using the data backed up through HyperClone.
A.
When the source LUN fails, service data can be recovered from any point in time before the fault occurred using the data backed up through HyperClone.
Answers
B.
If a disk failure occurs on the source LUN of HyperClone, you can split the target LUN from the source LUN to continue providing services.
B.
If a disk failure occurs on the source LUN of HyperClone, you can split the target LUN from the source LUN to continue providing services.
Answers
C.
If a logical fault occurs on the source LUN, data can be reversely synchronized from the target LUN to the source LUN to recover services on the source LUN.
C.
If a logical fault occurs on the source LUN, data can be reversely synchronized from the target LUN to the source LUN to recover services on the source LUN.
Answers
D.
Multiple target LUNs can be created through HyperClone to provide the service data on the source LUN for multiple applications.
D.
Multiple target LUNs can be created through HyperClone to provide the service data on the source LUN for multiple applications.
Answers
Suggested answer: A, C, D

Explanation:

A, C, and D are all true statements about the functions of HyperClone. HyperClone allows you to back up data from a source LUN, and when the source LUN fails, service data can be recovered from any point in time before the fault occurred . Additionally, if a logical fault occurs on the source LUN, data can be reversely synchronized from the target LUN to the source LUN to recover services on the source LUN. Finally, multiple target LUNs can be created through

HyperClone to provide the service data on the source LUN for multiple applications.

As the new storage administrator, you are tasked with the procurement of a new batch of SSD drives to replace the older drives that has reached the end of life. You have the option of SLC, MLC and TLC SSD. Which of the following will be your choice with a limited budget and medium level of reliability concerns? (Select All that Apply)

A.
Purchasing all SLC SSD drives for maximum savings on cost regardless of reliability.
A.
Purchasing all SLC SSD drives for maximum savings on cost regardless of reliability.
Answers
B.
Purchasing all TLC SSD drives for the storage system for the best reliability and performance.
B.
Purchasing all TLC SSD drives for the storage system for the best reliability and performance.
Answers
C.
Purchasing the MLC SSD if within budget range for core applications and services for better performance and reliability.
C.
Purchasing the MLC SSD if within budget range for core applications and services for better performance and reliability.
Answers
D.
Purchasing SLC SSD drives that has lowest cost and reliability for storage purposes of non critical applications
D.
Purchasing SLC SSD drives that has lowest cost and reliability for storage purposes of non critical applications
Answers
Suggested answer: C, D

Explanation:

When choosing between different types of SSDs, the main factor to consider is the trade-off between cost and reliability. SLC (Single-Level Cell) SSDs are the most reliable and have the longest lifespan, but they are also the most expensive. TLC (Triple-Level Cell) SSDs are less reliable than SLC SSDs, but they are also less expensive. MLC (Multi-Level Cell) SSDs are a good balance between cost and reliability, they are more affordable than SLC SSDs and more reliable than TLC SSDs.

Which statements are true about HyperMetro? (Select All that Apply)

A.
The local and remote sites can run services at the same time
A.
The local and remote sites can run services at the same time
Answers
B.
A quorum server must be configured.
B.
A quorum server must be configured.
Answers
C.
HyperClone can be configured only for storage devices of the same model and version
C.
HyperClone can be configured only for storage devices of the same model and version
Answers
D.
Automatic switchover upon storage faults is supported.
D.
Automatic switchover upon storage faults is supported.
Answers
Suggested answer: A, B, D

Explanation:

HyperMetro allows the local and remote sites to run services at the same time, and a quorum server must be configured. Additionally, automatic switchover upon storage faults is supported. HyperClone can be configured for storage devices of different models and versions.

Huawei OceanStor hybrid flash storage is used as an example. Which statements are true about IP address failover? (Select All that Apply)

A.
IP address failover applies only to IP SAN and does not apply to other storage network architectures
A.
IP address failover applies only to IP SAN and does not apply to other storage network architectures
Answers
B.
A failover group is a combination of ports that are used for IP address failover in a storage system.
B.
A failover group is a combination of ports that are used for IP address failover in a storage system.
Answers
C.
Fallback means that the faulty port takes over services again after it recovers
C.
Fallback means that the faulty port takes over services again after it recovers
Answers
D.
IP address failover ensures service continuity and improves the reliability of paths for accessing file systems
D.
IP address failover ensures service continuity and improves the reliability of paths for accessing file systems
Answers
Suggested answer: B, D

Explanation:

A failover group is a combination of ports that are used for IP address failover in a storage system, and IP address failover ensures service continuity and improves the reliability of paths for accessing file systems. IP address failover applies to all storage network architectures, not just IP SAN. Fallback means that the standby port takes over services when the active port fails, and then the active port takes over services again after it recovers.

Which of the following are the data transmission rates that can be configured on the FC ports on the FC switch in FC SAN given that your cable and SFP supports it? (Select All that Apply)

A.
8Gb
A.
8Gb
Answers
B.
11Gb
B.
11Gb
Answers
C.
4Gb.
C.
4Gb.
Answers
D.
16Gb.
D.
16Gb.
Answers
Suggested answer: A, B, D

Which statements are true about distributed storage? (Select All that Apply)

A.
Supports large-scale horizontal expansion
A.
Supports large-scale horizontal expansion
Answers
B.
Does not support elastic EC for data redundancy protection.
B.
Does not support elastic EC for data redundancy protection.
Answers
C.
Supports expansion by addition of nodes to increase both computing capability and storage space
C.
Supports expansion by addition of nodes to increase both computing capability and storage space
Answers
D.
Supports storage resource pooling and virtualization.
D.
Supports storage resource pooling and virtualization.
Answers
Suggested answer: A, C, D

Explanation:

Distributed storage systems are designed to support horizontal scaling, which means adding more nodes to the system to increase both computing capability and storage space. This enables the system to handle large amounts of data and large numbers of users. Distributed storage systems also support storage resource pooling and virtualization, which allows for efficient use of storage resources and easy management of storage.

Which of the following statements correctly describe the improvements of SAS technology compared to SCSI? Select All that Apply.

A.
Lower cost than SCSI
A.
Lower cost than SCSI
Answers
B.
Full duplex transmission of data.
B.
Full duplex transmission of data.
Answers
C.
Half duplex transmission of data
C.
Half duplex transmission of data
Answers
D.
Higher throughput.
D.
Higher throughput.
Answers
Suggested answer: B, D

Explanation:

SAS technology offers full duplex transmission of data and higher throughput than SCSI, which makes it more cost-effective and efficient. SAS technology does not offer half duplex transmission of data.

A company purchased DAS devices to store files and service data at the startup stage. With the increase of service volume and diversity, which problems may occur? (Select All that Apply)

A.
It is difficult to expand the capacity of the DAS architecture after the data volume increases to a certain level.
A.
It is difficult to expand the capacity of the DAS architecture after the data volume increases to a certain level.
Answers
B.
Data and materials are scattered on different devices and cannot be managed in a centralized manner.
B.
Data and materials are scattered on different devices and cannot be managed in a centralized manner.
Answers
C.
As the number of file servers increases, no more servers can be added to share the DAS storage.
C.
As the number of file servers increases, no more servers can be added to share the DAS storage.
Answers
D.
Data and materials are scattered on different devices and hard to be searched for
D.
Data and materials are scattered on different devices and hard to be searched for
Answers
Suggested answer: A, B, D

Explanation:

With the increase of service volume and diversity, problems such as difficulty in expanding the capacity of the DAS architecture, data and materials being scattered on different devices and hard to be managed in a centralized manner, and hard to be searched for may occur. Adding more servers to share the DAS storage is not an issue.

Which of these are O&M standard systems? (Select All that Apply)

A.
International Organization for Standardization 2000 (ISO2000)
A.
International Organization for Standardization 2000 (ISO2000)
Answers
B.
Institute of Electrical and Electronics Engineers (IEEE)
B.
Institute of Electrical and Electronics Engineers (IEEE)
Answers
C.
Information Technology Infrastructure Library (ITIL)
C.
Information Technology Infrastructure Library (ITIL)
Answers
D.
Storage Networking Industry Association (SNIA)
D.
Storage Networking Industry Association (SNIA)
Answers
Suggested answer: A, C

Explanation:

International Organization for Standardization 2000 (ISO2000) and Information Technology Infrastructure Library (ITIL) are O&M standard systems. Institute of Electrical and Electronics Engineers (IEEE) and Storage Networking Industry

Association (SNIA) are not O&M standard systems.

What are the main functions of the business continuity solution? (Select All that Apply)

A.
Minimize the impact on the business service.
A.
Minimize the impact on the business service.
Answers
B.
Predict the disaster occurrence accurately.
B.
Predict the disaster occurrence accurately.
Answers
C.
Zero data loss and zero service interruption.
C.
Zero data loss and zero service interruption.
Answers
D.
Improve the utilization rate of the disaster recovery equipment
D.
Improve the utilization rate of the disaster recovery equipment
Answers
Suggested answer: A, C, D

Explanation:

The main functions of the business continuity solution are to minimize the impact on the business service, ensure zero data loss and zero service interruption, and improve the utilization rate of the disaster recovery equipment. Predicting the disaster occurrence accurately is not a function of the business continuity solution.

Total 536 questions
Go to page: of 54