Which statement about a new HPE SimpliVity deployment is true?

All new HPE SimpliVity models support deduplication and compression

New HPE SimpliVity deployments give customer flexible choice of hypervisor

All new HPE SimpliVity models are based on AMD CPUs

All new HPE SimpliVity models support deduplication and compression

New HPE SimpliVity deployments are licensed per node not per physical socket

Which statement about login redistribution is true?

Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules

Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame

Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports

Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules

Login redistribution is used for login balancing when they are not distributed evenly over the FC links

Which statement about an HPE Oneview support dump is true?

Support dump is a binary file that can be opened only in a dedicated application

Appliance support dump by default contains a logical enclosure support dump

Support dump is a binary file that can be opened only in a dedicated application

Support dump can be created if HPE Virtual Connect modules are installed in the frame

Preview support dump is available only when creating an appliance support dump

Refer to the exhibit. Which statement about this logical interconnect group is true?

Both master modules are located in the same HPE S ynergy frame

The master modules are located in the interconnect bays 2 and 5

For the given downlink speed, the maximum number of frames is reached

Both master modules are located in the same HPE S ynergy frame

To use interconnect bay set 3, all compute nodes must be half-height

An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?

At the iLO interface to verify whether the ILO Advanced license is properly applied

At HPE OneView Interface to verify whether the server is In the maintenance mode

At the iLO interface to verify whether the SSO certificate is removed from an iLO.

At HPE OneView Interface to verify whether the iLO processor is disabled

Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy- An appropriate number of vSAN Standard licenses for each compute node- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN

vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses

vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN

One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster You are preparing a proposal with the following components:- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy- an appropriate number of the vSphere Standard licenses for each compute node- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?

vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features

One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features

2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup

20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.

Your customer has the following HPE Synergy setup- 3 HPE Synergy 12000 Frames- 4 HPE Virtual Connect SE 100 Gb F32 Modules- 2 HPE Synergy 50 GO Interconnect Link Modules- 36 HPE Synergy 480 Gen10 Plus compute modules- 2 HPE Composer 2 modulesWhich statement about this setup is true?

The customer must buy 36 HPE OneView Advanced licenses to manage compute modules

To use all compute nodes, the customer must create at least two logical enclosures

To manage all frames, the customer must buy two additional HPE Composer 2 modules

The customer must buy 36 HPE OneView Advanced licenses to manage compute modules

The customer can add one D3940 storage Module to each of the frames

Which statement about HPE Superdome Flex 280 is true?

It must be equipped with at least 768 GB of memory.

It supports 2 to 8 sockets in 2-socket increments.

it cannot be managed using HPE OneView.

It must be equipped with at least 768 GB of memory.

It can support up to two nPars with an external RMC.

You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?

if both FiexNICs are configured with the same speed

If the logical enclosure is built on at least three HPE Synergy frames

if both FiexNICs are connected to different networks

if the logical enclosure is configured with redundant master modules

Your customer experienced some problems caused by outdated HPE Superdome Flex firmware.Which update method should they use to avoid these issues in the future?

RMC CLI to update I/O and HPE Persistent Memory firmware

HPE OneView method for I/O firmware update procedure

RMC CLI to update I/O and HPE Persistent Memory firmware

HPE OneView IT HPE Persistent Memory firmware must be updated.

HPE SUM if HPE Persistent Memory firmware must be updated

Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.What must the customer do before migrating the application?

Edit the server profile and change server hardware type

Migrate the application to a Logical JBOD and connect it to the new server

Copy the server profile and assign the clone to the new hardware

Edit the server profile and change server hardware type

Create a new server profile template and apply to the new hardware

Your customer has me following HPE Synergy setup- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy- Four HPE Synergy 50Gb interconnect Link Module- Six HPE Synergy Virtual Connect SE 32Gb FC ModulesThe customer needs to add a frame.Which statement about the expansion of this setup is true?

The customer has to create a new logical enclosure for the additional frame

The additional frame must have HPE Virtual Connect FC modules installed

The customer can grow the existing logical enclosure up to 5 frames

The customer has to create a new logical enclosure for the additional frame

The additional frame cannot have 12Gb SAS connection modules installed

Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiantGen 10 servers and an MSA array.Which statement about compatibility of the existing environment with the planned software components is true?

HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers

Both HPE Synergy Gen10 full-height compute module plugins will require a license

HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers

To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView

HPE Storage integration Pack for VMware vCenter does not support MSA arrays

Refer to the exhibit. Which statement about this logical interconnect group is true?

An additional license is required to change the enclosure count

Both modules are located in different frames for redundancy

For an uplink set, ports from different modules can be selected

interconnect modules are installed in interconnect bays 1 and 4

An additional license is required to change the enclosure count

Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.Which statement about mixing different FLM modules is true?

A management ring with mixed FLM modules cannot have more than 12 frames

Existing 2-port FLM modules must be replaced with 4-port FLM modules

A management ring can contain mixed frame link module configurations

A management ring with mixed FLM modules cannot have more than 12 frames

Mixing different FLM modules is allowed if all of them have the same firmware version

Which statement about HPE OneView milestone releases is true?

A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy

A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems

A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.

A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

If the D3940 module is imported in managed state that allows volume provisioning.

If there Is a logical interconnect created based on the 12Gb SAS switches.

If the D3940 storage module is property licensed through HPE OneView interface.

If there is at least one ISCSI network configured that will provide access to the module.

Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and twoHPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

SAS switches must be moved to second fabric and FC modules Installed in the first one.

A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.

For Brocade switches, a logical interconnect group must be created in HPE OneView.

For VC-FC modules, all of server facing ports must be property licensed.

SAS switches must be moved to second fabric and FC modules Installed in the first one.

Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality

Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor

HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server

Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex 280 They plan to manage new components using HPE OneView What must be done to achieve this goal?

The customer must add a second Rack Management Controller for HPE Superdome Flex 280

The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView

The customer should deploy an HPE OneView appliance for HPE Superdome Flex management

The customer must add a second Rack Management Controller for HPE Superdome Flex 280

The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy

Which statement about manual orchestration during the firmware update is true?

It provides an ability to select and update one side of the Interconnect topology at a time

It is supported only for logical enclosures with at least three frames

It provides an ability to select and update one side of the Interconnect topology at a time

It provides the ability to install an older firmware version than currently Installed In the interconnect

It allows all the interconnect modules to be activated manually at the same time.

Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).What should you check during troubleshooting process?

If an compute nodes are added to the vCenter Server

If HPE OneView credentials are added in vCenter Server

If an compute nodes are added to the vCenter Server

If the HPE Oneview instance Is integrated with HPE OV4VC.

If vCenter Server is licensed in the HPE Oneview interface

You need to configure a RoCE network to enable lossless networking for HPE J2000 Flash Enclosure support Which interconnects are required to support this connection? (Select two.)

HPE Virtual Connect SE 16Gb FC Module for HPE Synergy

HPE Virtual Connect SE 32Gb FC Module for HPE Synergy

HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy

HPE Virtual Connect SE 16Gb FC Module for HPE Synergy

HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy

HPE Virtual Connect SE 32Gb FC Module for HPE Synergy

Brocade 16Gb Fibfe Channel SAN Switch Module for HPE Synergy

Brocade 32Gb Fibre Channel SAN Switch Module for HPE Synergy

Which statement about the SY480 Gen10 Plus Compute Module is true?

It only supports NVDIMM Persistent Memory.

It cannot be mixed with Gen9 compute modules in the same frame.

It supports 8 memory channels and memory DIMMs of up to 256GB.

It only supports NVDIMM Persistent Memory.

It supports "3rd Gen AMO EPYC Server Processors with 64 cores.

What is a restriction of using a RoCE network?

It is by default configured as an untagged network and cannot be a part of a network set.

It does not support Private VLAN and Multicast VLAN.

it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

It does not support smart link and private network features.

Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?

The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.

The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.

The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.

The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.

Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.What must be done to fix this issue?

The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.

Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.

To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.

The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.

Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.

Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

It can support a single processor only and up to 4 per chassis

It is equipped with HPE Persistent memory by default

It can support a single processor only and up to 4 per chassis

It is fully managed using HPE OneView including all connections

It offers servers with AMD EPYC and Intel Xeon Scalable CPUs

Which statement about the HPE D3940 storage module is true?

it is configured through CLl available from HPE Synergy console

SATA drives requires redundant 10 adapters to be installed in this module

Up to five modules can be installed in a single frame with Gen10 servers

it is configured through CLl available from HPE Synergy console

Only one type of drives (SATA, SAS, SSD) can be installed in each module

What is one of me benefits of using HPE Composer 2?

HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system

HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy

The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup

A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer

What is a limitation when creating a server profile?

ILO management is limited to the integration with Active Directory or LDAP

BIOS settings can be changed only when UEFI optimized is selected as boot mode

ILO management is limited to the integration with Active Directory or LDAP

Administrator cannot define more than 8 connections within a server profile

It is not possible to create shared volumes on demand through a server profile

You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?

All physical interconnects from affected logical interconnects will be placed in a maintenance mode

All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration

All logical interconnects configured using this logical Interconnect group will report inconsistency

All logical interconnects configured using this logical interconnect group will be automatically updated

HP HPE0-S60 Practice Test 1 - Free Online Exam Prep & Questions

A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?

Brocade 32GB Fibre Channel Switch Module for HPE Synergy

HPE virtual Connect SE 32 Gb FC Module for Synergy

HPE Virtual Connect SE 100 Gb F32 Module tor Synergy

HPE Synergy 12 Gb SAS Connection Module

Comment (0)

HP HPE0-S60 Practice Test 1

Question

HP HPE0-S60 Practice Tests

Practice Tests