Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.Which statement regarding this setup is true?

Each compute node must have at least 768GB of memory installed

Interconnect modules that provide SAS connectivity should be moved to the third fabric

Each interconnect module in each fabric must be properly licensed in HPE OneView

Compute nodes must have a second CPU installed to access the second fabric.

Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.Which procedures should De performed during the expansion process? (Select two.)

Create a new logical enclosure based on both HPE Synergy frames.

Modify an existing logical interconnect to include second HPE Synergy frame.

Create a new logical interconnect group and enclosure group for two frames setup

Create a new logical enclosure based on both HPE Synergy frames.

Re-parent an existing enclosure group to the new logical interconnect group.

Modify an existing logical interconnect to include second HPE Synergy frame.

Move one of the master modules to the appropriate interconnect bay in the second frame.

Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.

HPE Composer Maintenance Console

HPE OneView Update Readiness Checker

HPE OneView Firmware Compliance Report

Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.Which statement about these two systems is true?

Only HPE Superdome Rex 280 can be managed using HPE OneView

Only HPE Superdome Flex supports HPE Persistent Memory

Only HPE Superdome Flex 280 can support multiple nPars

Only HPE Superdome Flex supports 32 sockets and 48TB of memory

Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?

One base chassis and three expansion chassis with licenses

Rack Management Controller for nPar management

HPE Superdome Flex Grid licenses enabling connectivity between chassis

At least Tour HPE Persistent Memory DIMMs per nPar

One base chassis and three expansion chassis with licenses

Refer to the exhibit. Which statement about this logical JBOD is true?

After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done

This logical JBOD can be connected to multiple systems to formulate a snared datastore.

After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created

After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done

This logical JBOD can be presented to the compute nodes in a different frame.

Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?

FC connectivity on the modules should be enabled through the service console by disabling FCoE.

Enable FC primary and secondary boot on the modules through the HPE OneView interface

FC connectivity on the modules should be enabled through the service console by disabling FCoE.

Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules

Enter both modules into a maintenance mode, then enable FC connectivity through CLI

Your customer plans to deploy VMware vSAN using D3940 Storage Modules.Which statement about this solution is true?

The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.

To use the storage controller that will access D3940 storage modules, a second CPU must be installed.

For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.

All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured

Your customer has the following HPE Synergy setup:- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port- 2 HPE Composer 2 modules- 15 HPE D3940 Storage Modules, one per frame- 2 HPE 12Gb SAS switches per frameWhich statement about this setup is true?

The customer must create at least five logical enclosures for this setup.

To manage 15 frames, additional HPE Composers are required.

The customer can install up to 12 HPE Synergy 480 compute nodes per frame.

If properly cabled, any compute node can access any HPE D3490 storage module

Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.- 20 HPE ProLiant DL365 Gen10 Plus servers- 20 HPE ProLiant DL380 Gen10 Plus servers- 5 HPE Primera 650- 5 HPE MSA 2062 Storage ArrayWhich statements about now OneView will work with this new equipment are true? (Select two)

HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included

HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView

HPE MSA 2062 Storage Array is not supported in HPE OneView

HPE OneView replaces array management tools for both types of array

HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included

HPE Primera 650 can be managed using HPE OneView.

Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chasWhich statement about workload availability during expansion is true?

Powered nPar can be expanded only if HPE Superdome Flex 280 is used

Online expansion is available only if RMC is used for management.

HPE Superdome Flex does not support expansion of powered on nPars

Powered nPar can be expanded if it does not use HPE Persistent Memory

Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new functionalities, the customer wants to update HPE OneView to version 61Which statement about this update process is true?

The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.

The customer can update directly to 6,1, but HPE OneView downtime will be longer.

Before updating to 6,1, customer should increase memory size on the HPE Composer.

The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cardsThey plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration- two HPE Synergy Virtual Connect SE 32Gb FC Modules- two HPE Synergy 20Gb interconnect Link Modules- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cardsWhich statement about the planned configuration change is true?

The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Four compute modules must be moved to the second frame to balance the configuration

The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option

A license for an extended logical enclosure must be added to HPE OneView through GUI

The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

The proposal consists of.- 3 HPE Synergy 12000 frames- 6 HPE Composer 2 modules- 2 HPE Virtual Connect SE 100 GO F32 Module- 4 HPE Synergy 50 GO interconnect Link ModuleWhich statements about this proposed design are true? (Select two.)

HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules

FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added

The selected interconnect modules do not provide the requested WWN virtualization

HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules

The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules

FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added

Remove 4 HPE Composer 2 modules from the design, as they are not required

As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2Why would you recommend this change?

HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog

HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.

HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely

HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased 50 HPE.ProLiant DK385 Gen10 Plus v2. They plan to manage the new systems using HPE OneView as well.What should the customer do to manage rack system using HPE OneView?

Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.

add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.

connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.

Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.

Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.

Which statement about HPE Superdome nPars is true?

Rack Management Controller is required Tor nPar configuration

Chassis in the same nPar can have different CPU configuration

Rack Management Controller is required Tor nPar configuration

Chassis in the same nPar can have different memory configuration

nPars are supported only with 3rd Generation Intel Xeon Scalable Processors

Which statement about a new HPE SimpliVity deployment is true?

New HPE SimpliVity deployments gives customer flexible choice of hypervisor

A new HPE SimpliVity node can be a member of multiple dusters

AM new HPE SimpliVity models are software optimized

All new HPE SimpliVity models are based on mid CPUs

Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.How does managing the new arrays compare to managing their old arrays?

HPE OneView offers additional functionalities for HPE Primera like CPG management

HPE OneView offers limited support tor HPE Primera because of the firmware differences

To manage HPE Primera using HPE OneView. a dedicated license is required

Management procedures and features are the same tor both types of the array

Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server.They get an error and cannot proceedWhich tool should you use to troubleshoot the problem?

HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered

vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded

HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.

ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.

Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32Module for HPE Synergy. They have recently purchased HPE VC FC modules.What must you be aware of regarding utilization sampling for the new modules?

Utilization sampling for HPE VC FC modules must be enabled manually using CLI.

For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled

For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied

Utilization sampling works the same way tor any type of HPE Synergy interconnect modules

HP HPE0-S60 Practice Test 2 - Free Online Exam Prep & Questions

Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.

What should you do to resolve this issue?

Become a Premium Member for full access

Unlock Premium Member

HP HPE0-S60 Practice Test 2

Question

HP HPE0-S60 Practice Tests

Practice Tests