A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?

Boot volumes can be created on demand and defined in the server profile template.

Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.

An existing volume can be replicated automatically when creating a server profile.

single SAN volume can be created and utilized by all HPE Synergy Compute Modules.

Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.How can this task be completed?

Set a specific workload profile within server profile template and update all profiles.

Set a specific workload profile within Logical Interconnect Group and update all servers.

Set a specific workload profile for all managed servers as an HPE OneView global setting.

Set a specific workload profile within server profile template and update all profiles.

Set a specific workload profile using IL0 interface for each individual server.

Refer to the exhibit. After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?

Volume presentation through server profile will work with the discovered state.

Snapshot functionality will be limited only to the volumes not using these SANs.

Volume presentation through server profile will work with the discovered state.

Auto-zoning functionality will not work until SANs are associated with networks.

Volume provisioning will only work for arrays that ate accessible through these SANs.

Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.Which resource provided by HPE should you discuss with this customer?

HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.

HPE OneView Global Dashboard allows server profile replication and change management.

PowerShell Library for HPE OneView allows scripted environment modification.

HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.

HPE Image Streamer provides templates which can be updated to map the hypervisor requirements

Refer to the exhibit. Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?

The other networks are not added to the Logical Interconnect Group configuration.

The other networks are not configured with the required Smart Link parameter.

The other networks are not added to the Logical Interconnect Group configuration.

The other networks have Private Network' selected, which hides them from Compute Modules.

The other networks are configured with a purpose other than General or Management.

You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.What must you do next?

reset an il_0 management processor to activate the new boot mode for the server

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

reset BIOS settings to the defaults so UEFI settings can be applied

reset BIOS settings to the defaults through the server profile after changing the boot mode

Which statement regarding HPE OneView backup restore is true?

Only users with Infrastructure Administrator privileges can restore an HPE OneView backup

During backup restore, users with Administrator privileges can still login to HPE OneView

An HPE OneView backup can be used to restore individual components like server profile

Users with Backup Administrator privileges can restore an HPE OneView backup

Only users with Infrastructure Administrator privileges can restore an HPE OneView backup

You try to add a new connection within a server profile, but an operation fails when you try to commit the changes.What is a possible reason?

You tried to add additional connection above the limit

The server does not have an HPE OneView license applied

You have created volumes using array management tools and imported the volumes to HPE OneView.Which statement about these volumes is true?

Volumes imported to HPE OneView is managed just like a volume created using HPE OneView

Imported volumes are treated as private volumes and can be only used as boot volumes

Volumes imported to HPE OneView is managed just like a volume created using HPE OneView

Volumes imported to HPE OneView cannot be removed using the HPE OneView interface

A snapshot for imported volumes can be created only by using array management tools

Your customer has an environment with five HPE Synergy Composers and 15 HPE OneView appliances managing servers that run VMware. The customer is having a hard time managing their servers.What can the customer do to simplify management of this complex environment?

deploy HPE OneView for VMware vCenter Server

deploy HPE OneView Global Dashboard

integrate all HPE OneView appliances and HPE Composers with Active Directory

Refer to the exhibit. Which statement about the storage pools shown is true?

Both storage pools are in a managed state and can be used for volume provisioning

Volumes created on the first storage pool cannot use data reduction technologies

Both storage pools are in a managed state and can be used for volume provisioning

HPE OneView can be used to configure volume replication between these pools

Both storage pools have a license applied that enables management of these pools

What event occurs on iLO when an HPE ProLiant server is added to HPE OneView?

REST API plugin is enabled for iLO

IPMI credentials are configured for the iLO

REST API plugin is enabled for iLO

Active Directory configuration is performed on iLO

SSO certificate is added to the iLO

Refer to the exhibit. Which statement about server connections is true?

Ethernet connection is configured to boot from PXE

LACP on downlinks is configured for Ethernet connection

All connections within the server profile are using physical IDs

Ethernet connection is configured to boot from PXE

Storage array is connected directly to an HPE Synergy frame

Within HPE OneView you can configure SNMPv1 read community string.What is the purpose of this feature?

This is an SNMP community string that will be used to receive a trap's SNMP Agent

This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider

This is an SNMP community string that will be used when traps are forwarded to other SNMP applications

This is an SNMP community string that will be used to receive a trap's SNMP Agent

This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators

How will setting the Purpose field within the network definition of a server profile impact the network traffic?

network purpose does not affect the behavior of the network

network purpose can give higher priority for a specific type of traffic

network purpose will impact the traffic only if Virtual Connect modules are used

network purpose will define QoS within Logical Interconnect

network purpose does not affect the behavior of the network

You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.In which scenario should you set redundancy for master modules to be highly available?

When each Virtual Connect module is installed in different frame

When storm control or loop protection will be enabled for Virtual Connect modules

When each of the frames has two Virtual Connect modules installed

When each Virtual Connect module is installed in different frame

When each Virtual Connect module is installed in different fabric

Your customer wants to manage their HPE Superdome Flex using HPE OneView.Which component must be added to HPE OneView to accomplish this task?

Baseboard Management Controller (BMC)

Rack Management Controller (RMC)

all nPARs created within the complex

only the base chassis from the complex

Where is the association between an HPE OneView network and uplink port defined?

At the Logical Interconnect Group level

Within an Enclosure Group definition

Within an HPE OneView network definition

At the Logical Interconnect Group level

Your customer wants to add second HPE Synergy frame to an existing logical enclosure. How it can be achieved?

Customer has to join new enclosure to the management ring and modify logical interconnect group to add new frame.

Customer has to use HPE OneView server migration feature to migrate new servers to an existing logical enclosure.

Customer has to create new enclosure group and re-parent an existing logical enclosure to the new enclosure group.

Customer has to join new enclosure to the management ring and modify logical interconnect group to add new frame.

Customer has to delete an existing logical enclosure, create new enclosure group and re-create logical enclosure.

How can your customer obtain the PowerShell Library for HPE OneView?

It can be downloaded from Microsoft PowerShell Gallery.

It is available for customers with more than 100 compute nodes.

It is a part of the OneView for VMware vCenter Library.

It is available as a part of a service contract for HPE compute nodes.

It can be downloaded from Microsoft PowerShell Gallery.

Your customer wants to create a volume on a specific CPG within an HPE Primera array using the HPE OneView interface, but that CPG is not available for a volume provisioning.What should you verify to solve the problem?

The CPG was imported as a managed storage pool.

The WSAPI and VASA provider are enabled on the array.

The CPG was imported as a managed storage pool.

The array has a proper license in HPE oneView.

The array is enabled for HPE OneView management.

Your customer wants to update firmware for a compute node with no server Which server hardware can support this feature?

HPE Gen 10 and later HPE ProLiant servers or Synergy compute nodes.

HPE Gen8 an later HPE ProLiant systems monitored in HPE OneView.

Any HPE server equipped with at least iL04.

Any server monitored or managed in HPE OneView.

HPE Gen 10 and later HPE ProLiant servers or Synergy compute nodes.

Which server profile template feature is available only for HPE Synergy compute nodes?

Firmware and drivers update options.

Visualization of MACs and WWNs.

Firmware and drivers update options.

Which statement regarding HPE GreenLake for Compute Ops Management - OneView Edition requirements is true?

It can be used tree of charge for the HPE Synergy platform because the licenses are included.

It supports HPE OneView instances from version 8.40 or newer.

It can be used tree of charge for the HPE Synergy platform because the licenses are included.

It is available for customers that have more than three HPE Synergy Frames.

It supports HPE ProLiant G6 and newer systems regardless of the OS installed.

Your customer wants to know what will happen If a server is positioned in maintenance mode using HPE Oneview. How should you respond?

This mode will suppress unwanted emails and activity alerts for routine server maintenance.

This mode will temporarily remove server profiles from the server for the maintenance period.

This mode will disable all network and storage connections during the maintenance period.

This mode will position the server in an isolated network to allow hardware or software maintenance.

Which statement about HPE OneView Global Dashboard is true?

It is a virtual appliance that can aggregate health and inventory information from multiple HPE OneView appliances or HPE Composers

It is an application that can be installed on Windows or Linux system that will provide automated discovery of HPE OneView instances

It is a plugin to HPE Oneview that will allow integration of HPE oneView with VMware management and monitoring components

It is a virtual appliance that can aggregate health and inventory information from multiple HPE OneView appliances or HPE Composers

It is a plugin to vCenter Server that will allow management of the components added to HPE Oneview from vCenter server interface

You plan to update HPE OneVew to the latest versionWhat Should you do Mora starting HPE OneView update?

Run the Update Readiness checker tool to evaluate HPE OneView health status

Disable HPE Remote Support at toe HPE OneView appliance level

Put all servers managed through HPE OneView to maintenance state

Run the Update Readiness checker tool to evaluate HPE OneView health status

Create a support dump for the appliance and for all managed logical interconnects

You are deploying HPE OneView to manage a customer's HPE ProLiant serversIs this statement about appliance availability true?

HPE OneView availability relies on HA features provoed by the hypervisor

HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster

HPE OneView has a built-in HA feature that can be activated with an additional license

HPE OneView availability relies on HA features provoed by the hypervisor

During hpe oneView deployment customer may select configure proprietary HA mode.

Which statement about managing an HPE BiaoeSystem sever is true?

An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section

A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers

An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section

An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure

Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring

You want to enable HPE Remote Support within HPE OneView.Which servers will be covered with HPE Remote Support once enabled?

Any servers under warranty or active service contract.

Only HPE Synergy Compute Modules with a server profile applied.

Any Gen8, Gen9 and Gen10 servers managed using HPE OneView.

Any servers under warranty or active service contract.

Any server except HPE Superdome Flex and HPE Superdome Flex 280.

How is HPE Storage Integration Pack for VMware vCenter deployed?

It |i deployed as a virtual appliance to the supported hypervisor.

It is deployed as an agent on any supported and managed array.

It |i deployed as a virtual appliance to the supported hypervisor.

It is the part of the standard HPE OneView appliance, but it must be activated.

It is deployed as an application on Windows system running in the virtual machine.

HP HPE2-T37 Practice Test 2 - Free Online Exam Prep & Questions

Refer to the exhibit.

HP HPE2-T37 image Question 41 124873 11012024014512000000

A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?

Become a Premium Member for full access

Unlock Premium Member

HP HPE2-T37 Practice Test 2

Question

HP HPE2-T37 Practice Tests

Practice Tests