Which statement about server hardware types is true?

Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers

Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems

Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination

The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView

Which action is allowed on storage pools managed by HPE OneView?

Setting storage pool replication

Changing storage pool RAID level

Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?

A logical JBOD cannot be created during server profile creation and must be prepared in advance

A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.

A logical JBOD cannot be created during server profile creation and must be prepared in advance

Different types of the drives can be used within a logical JBOD as long as they have the same capacity

Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator

You Just downloaded a logical enclosure support dump, but you cannot extract files from the downloaded support dump. What is a likely cause of the issue?

The support dump for Logical Enclosure can be analyzed only using special tool.

The support dump is encrypted and cannot be unpacked

The support dump does not have a valid HPE OneView certificate

The backup user role must be used to extract the support dump

Which operation can be performed using HPE OneView for VMware vCenter Server?

Remove a new node from an existing cluster

Create a new VMware cluster within vCenter Server

Configure VMware cluster properties tor HA and DRS

Create a new distributed switch for cluster connectivity

what is required to add a remote frame to the primary management ring?

Request code from the primary HPE Composer

Serial number of one of the remote frames

Remote frame Link Module IPv6 address

Request code from the primary HPE Composer

Which statement about the presented storage pools is true?

All storage pools from the system named ThreePAR-1 can be used for volume provisioning

Storage pools in discovered state can be removed from HPE OneView.

HPE OneView can be used to configure replication only between managed storage pools

All storage pools from the system named ThreePAR-1 can be used for volume provisioning

All storage pools in managed state have a valid HPE OneView license applied

Which statement about the volume template is true?

Users will be able to change sharing type and volume capacity

A volume created using this template will not support deduplication

A volume created using this template mil not support snapshots

Users will be able to select storage pool during volume creation

Your customer plans to monitor HPE ProLiant DL systems and HPE BladeSystem using HPE OneView Which license is required to accomplish this task?

HPE One View Global Dashboard license

Why is the network unavailable for selection?

The customer defined more than 1024 VLANs and some of them are unavailable.

The network is part of a network set and cannot be used by the compute node.

The network is not defined using uplink sets in a Logical interconnect Group.

The uplink used by this network is not connected to any physical switches.

Your customer plans to update HPE OneView to the latest version. They want to know, what will happen during an appliance reboot How should you respond?

When the appliance is offline, it does not affect the managed resources.

When the appliance is offline, it may affect network or storage traffic.

When the appliance is offline, all servers are placed in maintenance mode.

When the appliance is offline, it does not affect the managed resources.

When the appliance is offline, the iL0 processor is not accessible.

Which component managed using HPE OneView can obtain an IP address from the subnet and address range defined in the HPE OneVlew settings?

An iL0 in an HPE ProLiant server

Any supported HPE storage array

An iL0 in an HPE Synergy compute node

An iL0 in an HPE ProLiant server

Your customer would like to use the second mezzanine slot in an HPE Synergy 480 Genii compute node for dedicated FC connectivity. What is required to use the second mezzanine slot For the compute node?

A second processor must be installed.

A server profile template must be created.

All memory installed must be the maximum size.

An appropriate HPE OneView license is required.

A second processor must be installed.

Your customer wants to add a rack system to HPE OneView. How can this task be completed?

Rack systems can be denned manually using the HPE OneView interface.

Rack systems can be added if the appropriate license is installed.

Rack systems are automatically discovered if they contain a managed server.

Rack systems can only be defined for HPE Synergy components.

Rack systems can be denned manually using the HPE OneView interface.

When should HPE oneView backups be created?

Before and after upgrading HPE OneView to a new version.

Before removing a server profile from HPE OneView.

After creating a new VM on a managed hypervisor.

After updating drivers on a host managed by HPE OneView.

Before and after upgrading HPE OneView to a new version.

Your customer has tried to delete a volume using HPE OneView interface, but the operation has failed. Which of the following statements would cause the operation to fail?

This volume is presented to the server.

This volume is marked as permanent.

This volume has at least one snapshot created.

This volume is rebuilding after the drive failure.

Your customer wants to deploy HPE OneVlew appliance to manage HPE ProLiant servers. Customer reports that they nave only KVM available What can you tell this customer?as a hypervisor.

HPE OneView appliance can be deployed to KVM - in addition to VMware ESXi and Hyper.

HPE OneView appliance can be deployed only to the VMware ESXi, and KVM is not supported.

Customer can deploy nested ESXI in a KVM VM. then deploy HPE OneView appliance to the ESXi.

Customer can convert ESXi appliance version and deploy it to the KVM hypervisor.

Your customer wants to make sure that that each server profiles have only volume defined in the server profile template. When the customer added an extra volume to one of the server profiles, there is no report of inconsistency.What should be verified?

Consistency checking level for SAN storage in the server profile.

State of the SAN connections in the server profile.

FC network definition and association with fabrics from SAN manager.

Consistency checking level for SAN storage in the server profile.

Proper array and storage pools licensing in HPE OneView.

Which statement about a logical enclosure support dump is true?

The support dump file can be encrypted to secure it's content when sending through internet.

The support dump can be created when logical enclosure is in a maintenance state.

The support dump can be only created by an HPE Support engineer.

The support dump is sent automatically to HPE support once per week.

Your customer is using HPE OneView to manage HPE ProLian systems. In the same rack they also have two Aruba top-of-rack switches. Your customer wants to visualize the rack system and switches in HPE OneView.

Define the switches as unmanaged devices manually.

Start hardware discovery to add the Aruba switches.

Add the Aruba switches as managed devices in HPE OneVlew.

Add the Aruba switches as monitored devices in HPE OneView

Which HPE compute systems are supported in HPE GreenLake for Compute Ops Management - OneView Edition?

HPE ProLiant Gen10 and newer systems

HPE ProLiant G6 and newer systems.

HPE Synergy compute nodes Gen10 or later.

HPE ProLiant Gen10 and newer systems

HPE superdome Flex and Superdome Flex 280

Which of the following is a characteristic of the RoCE network type?

It has Quality of Service enabled by default.

It is always configured as a private network.

It has smart link enabled at all times.

What is configured on iL0 management processor during HPE Synergy hardware discovery process in HPE OneView?

Trap destination to HPE OneView

You have to move a server profile from a server to the other server. What must be done prior server profile migration?

Target system must be powered off.

Source system has to be placed in a maintenance mode.

Target system must be powered off.

Source server has to be powered on.

Target server has to be placed in a maintenance mode.

HP HPE2-T37 Practice Test 3 - Free Online Exam Questions 81-115

Spam

Selling illegal goods, money scams etc.

Hate Speech

Serious attack on a group.

Harassment and bullying

Harassing an individual (including doxing)

Harmful activities

Threatening or glorifying violence or serious harm, including self-harm

Adult content (Consensual)

Nudity/Sexual content

Sexual exploitation and abuse (child safety)

Sexually explicit or suggestive imagery or writing involving minors

Sexual exploitation and abuse (adults and animals)

Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans

Plagiarism

Reusing content without attribution (link and blockquotes)

Poorly written

Not in English or has very bad formatting, grammar, and spelling

Inappropriate credential

Author's credential is offensive, spam, or impersonation

Other

Ex. Illegal content, incomplete question...

HP HPE2-T37 Practice Test 3

Question

HP HPE2-T37 Practice Tests

Practice Tests