ExamGecko
Search Search Login
Home Home / HP / HPE6-A72

HP HPE6-A72 Practice Test - Questions Answers, Page 4

Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch. What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
Refer to the exhibit. The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports. Which ports carry VLAN 1 traffic?
What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?
Refer to the exhibit. What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
Refer to the exhibit. You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master. What is a valid configuration for Access-2 to join the VSF stack?
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
What connectivity commands are available on AOS-CX switches? (Choose two.)
Core(config)# user admin password Core(config)# interface mgmt Core(config-if-mgmt)# ip static 10.254.16.89/22 Core(config-if-mgmt)# default-gateway 10.254.19.129 Core(config)# ssh server vrf mgmt Core(config)# https-server vrf mgmt You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings. Which two steps are missing? (Choose two.)
Refer to the exhibit. Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN. Which configuration will correct the issue?
Which two port characteristics must match between LAG interfaces? (Choose two.)

Question 31

Report
Export
Collapse

Which two port characteristics must match between LAG interfaces? (Choose two.)

A.
Port number
A.
Port number
Answers
B.
Duplex
B.
Duplex
Answers
C.
Member ID
C.
Member ID
Answers
D.
Media type
D.
Media type
Answers
E.
Chassis number
E.
Chassis number
Answers
Suggested answer: B, D

Question 32

Report
Export
Collapse

The customer has 778 developers testing computer games on the network.

Which two actions resolve Broadcast storms? (Choose two.)

A.
Manually disable the redundant link to immediately resolve the impacted portion of the network.
A.
Manually disable the redundant link to immediately resolve the impacted portion of the network.
Answers
B.
Utilize Spanning Tree to dynamically disable all redundant links in a segment.
B.
Utilize Spanning Tree to dynamically disable all redundant links in a segment.
Answers
C.
Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
C.
Setting switch ports to half-duplex will resolve Broadcast storms using Carrier Sense Multiple-Access Collision Detection (CSMA/CD).
Answers
D.
Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
D.
Enable single Area Open Shortest Path First (OSPF) on all Layer 2 switches, but do not enable routing.
Answers
E.
Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
E.
Utilize Spanning Tree to dynamically block Designated ports in addition to Alternate ports.
Answers
Suggested answer: A, B

Question 33

Report
Export
Collapse

Interface 1/1/1 is up

Admin state is up

Link transitions: 1

Description: TO_PC-1

Hardware: Ethernet, MAC Address: 00:11:22:33:44:55

MTU 1500

Type 1GbT

Full-duplex

qos trust none

Speed 1000 Mb/s

Auto-negotiation is on

Flow-control: off

Error-control: off

MDI mode: MDIX

VLAN Mode: access

Access VLAN: 1111

Which command will produce the above output?

A.
show interface vlan 1111
A.
show interface vlan 1111
Answers
B.
show interface 1/1/1
B.
show interface 1/1/1
Answers
C.
show interface gigabit 1/1/1
C.
show interface gigabit 1/1/1
Answers
D.
show vlan 1111
D.
show vlan 1111
Answers
Suggested answer: B

Question 34

Report
Export
Collapse

Refer to the exhibit.

Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.

Which configuration will correct the issue?

A.
Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREENHost-B: assign the default-gateway address 10.1.20.181
A.
Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREENHost-B: assign the default-gateway address 10.1.20.181
Answers
B.
Core-1 (config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREENHost-B: assign the default-gateway address 10.1.20.181
B.
Core-1 (config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREENHost-B: assign the default-gateway address 10.1.20.181
Answers
C.
Core-1 (config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREENHost-B: assign the default-gateway address 10.1.20.1
C.
Core-1 (config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREENHost-B: assign the default-gateway address 10.1.20.1
Answers
D.
Host-B: assign the default-gateway address 10.1.20.181
D.
Host-B: assign the default-gateway address 10.1.20.181
Answers
Suggested answer: B

Question 35

Report
Export
Collapse

What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?

A.
backup secondary sftp://[email protected]/GL.10.04.0003.swi
A.
backup secondary sftp://[email protected]/GL.10.04.0003.swi
Answers
B.
copy secondary sftp://[email protected]/GL. 10.04.0003.swi
B.
copy secondary sftp://[email protected]/GL. 10.04.0003.swi
Answers
C.
copy sftp://[email protected]/GL. 10.04.0003.swi secondary
C.
copy sftp://[email protected]/GL. 10.04.0003.swi secondary
Answers
D.
copy secondary tftp://[email protected]/GL. 10.04.0003.swi
D.
copy secondary tftp://[email protected]/GL. 10.04.0003.swi
Answers
Suggested answer: B

Question 36

Report
Export
Collapse

Refer to the exhibit.

The above output is the result of issuing the command show system resource-utilization.

What command should be used to enable terminal output line by line or page by page?

A.
The command page
A.
The command page
Answers
B.
The command terminal length 30
B.
The command terminal length 30
Answers
C.
The command more
C.
The command more
Answers
D.
The command less
D.
The command less
Answers
Suggested answer: A

Question 37

Report
Export
Collapse

Refer to the exhibit.

You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.

What is a valid configuration for Access-2 to join the VSF stack?

A.
Access-2# configureAccess-2(config)# vsf member 1Access-2(config)# vsf renum be r-to 2Access-2(vsf-member-1)# link 2 2/1/28Access-2(vsf-member-1 )# exitThis will save the VSF configuration and reboot the switch.Do you want to continue (y/n)? y
A.
Access-2# configureAccess-2(config)# vsf member 1Access-2(config)# vsf renum be r-to 2Access-2(vsf-member-1)# link 2 2/1/28Access-2(vsf-member-1 )# exitThis will save the VSF configuration and reboot the switch.Do you want to continue (y/n)? y
Answers
B.
Access-2# configureAccess-2(config)# vsf member 2Access-2(vsf-member-1)# link 2 1/1/28Access-2(vsf-member-1 )# exitThis will save the VSF configuration and reboot the switch.Do you want to continue (y/n)? y
B.
Access-2# configureAccess-2(config)# vsf member 2Access-2(vsf-member-1)# link 2 1/1/28Access-2(vsf-member-1 )# exitThis will save the VSF configuration and reboot the switch.Do you want to continue (y/n)? y
Answers
C.
Access-2# configureAccess-2(config)# vsf member 2Access-2(vsf-member-1)# link 1 1/1/28Access-2(vsf-member-1 )# exitThis will save the VSF configuration and reboot the switch.Do you want to continue (y/n)? y
C.
Access-2# configureAccess-2(config)# vsf member 2Access-2(vsf-member-1)# link 1 1/1/28Access-2(vsf-member-1 )# exitThis will save the VSF configuration and reboot the switch.Do you want to continue (y/n)? y
Answers
D.
Access-2# configureAccess-2(config)# vsf member 1Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1 )# exitAccess-2(config)# vsf renum be r-to 2This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
D.
Access-2# configureAccess-2(config)# vsf member 1Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1 )# exitAccess-2(config)# vsf renum be r-to 2This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
Answers
Suggested answer: C

Question 38

Report
Export
Collapse

Refer to the exhibit

What is true regarding VLAN 50 according to the diagram above?

A.
VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
A.
VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
Answers
B.
Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
B.
Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
Answers
C.
VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
C.
VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
Answers
D.
VLAN 50 was never added to the vlan-database and therefore is in a down state.
D.
VLAN 50 was never added to the vlan-database and therefore is in a down state.
Answers
Suggested answer: B

Question 39

Report
Export
Collapse

Which command can be used to find the serial number of an Aruba OS-CX switch?

A.
The command inventory
A.
The command inventory
Answers
B.
The command version
B.
The command version
Answers
C.
The command show running-configuration
C.
The command show running-configuration
Answers
D.
The command show system
D.
The command show system
Answers
Suggested answer: D

Question 40

Report
Export
Collapse

Which statement is true regarding modern switching requirements?

A.
Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethemet needs.
A.
Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethemet needs.
Answers
B.
Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for loT devices are usualy addressed using default wired encryption that all 802.3 Ethernet switches provide.
B.
Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for loT devices are usualy addressed using default wired encryption that all 802.3 Ethernet switches provide.
Answers
C.
While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
C.
While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.
Answers
D.
Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of loT devices that require security and port authentication options.
D.
Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of loT devices that require security and port authentication options.
Answers
Suggested answer: D
Total 88 questions
Go to page: of 9
ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms