Home / HP / HPE7-A03

HP HPE7-A03 Practice Test - Questions Answers, Page 5

Question list

List of questions

Question 41

(0)

A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this fac

Question 42

(0)

A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this fac

Question 43

(0)

HOTSPOT Based on this campus design, click on the layer that is the most appropriate to be designed as a Stub Persona, considering an EVPN VXLAN Fabric?

Question 44

(0)

XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health ce

Question 45

(0)

XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health ce

Question 46

(0)

You are delivering a replacement collapsed core network proposal to the customer where the core switches will have the switched virtual interlaces (SVl) configured. The customer is not sure that a U

Question 47

(0)

DRAG DROP What documents should be included in the solution proposal? (Place the correct items into the list at the right. Order is not important. Not all options will be used)

Question 48

(0)

DRAG DROP You are going with a 3-tier design and need to calculate the oversubscription ratio on the Access. Distribution. Core, and ToR Layer. What is a suitable oversubscription ratio for each la

Question 49

(0)

DRAG DROP Match the deployment type to the estimated number of APs.

Question 50

(0)

You are responding to the customer's RFP and are at the point of documenting design decisions that were not specified in the RFP or the RFP questions. What are valid examples of assumptions made tha

Related questions

A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch. The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single 0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft). For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power. The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs). the customer has no change in WLAN requirements. The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed. The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing trie security of the wired network Infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They nave heard about dynamic segmentation and central and decentral overlay networks. What would you advise as the most cost-efficient solution?

You are designing a solution with Aruba OS10-based access points and redundant gateways and these are the requirements: * W1-F16E based access points * support for tunneled traffic * application visibility * rogue APs * live upgrades * Air Slice * Cloud Guest Authentication * Ai insights Which licenses are needed? (Select two.)

XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health centers and 1Z5 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced. XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites by enhancing wired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems. Locations: - XYZ Regional Hospital Is located In New York City - Dila Health Center Is located in City A - Mount Health Center is located In City B - Rock Health Center is located in City C - Branch clinics are located at different locations across the United States Requirements: - Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting. - Seamless integration across wired, wireless. WAN, S0-8ranch. loT * Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities. - All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified) - Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication - Identify and authenticate every wireless and wired device - End-to-end role-based security - Seamless mobility across the hospital tor medical teams, patients, and visitors - Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site - Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs - Fully redundant branch solution with dynamic path selection to the hospital XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements: - fully redundant NAC solution for management and authentication - wireless and wired authentication for the main hospital will be handled locally The IT director of XYZ Regional Hospital is interested in a solution tor nurse workstation tracking. What solution would meet the customer's requirements? (Select three.)

A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of No-Stair Inc.' has a similar layout: three small manager offices, a warehouse, and a 'retail' are a. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company Is minimally engaged In their LAN refresh so the CTO of the company has shared the information below Current WLAN Infrastructure Is based on the 802.1 In 'WlF14Less' access-points series (both model 2013-INT (2.4 only Internal antenna) and model 2019-EXT (dual-band external antenna only)). These AP models are standalone without any centralized management. Last year 'No-Stair InC ran a project called secure. It' ensuring that all needed network security was Implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA infrastructure to handle the Increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that 'No-Stair Inc.' will continue to use bridged SSIDs. with local breakout into different VLANs. The CTO of No-Stair Inc.' understands the need for you to ask additional questions to deliver the design The questions may be sent in written form and will be answered within two weeks. Which additional question is correct in order to collect needed information for the WLAN design?

DRAG DROP What should be Included in an Executive Summary? (Place the correct Items into the let at the right Order is no: Important Not all cottons win be used)

A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of No-Stair Inc.' has a similar layout: three small manager offices, a warehouse, and a 'retail' are a. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company Is minimally engaged In their LAN refresh so the CTO of the company has shared the information below Current WLAN Infrastructure Is based on the 802.1 In 'WlF14Less' access-points series (both model 2013-INT (2.4 only Internal antenna) and model 2019-EXT (dual-band external antenna only)). These AP models are standalone without any centralized management. Last year 'No-Stair InC ran a project called secure. It' ensuring that all needed network security was Implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA infrastructure to handle the Increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that 'No-Stair Inc.' will continue to use bridged SSIDs. with local breakout into different VLANs. The CTO of No-Stair Inc.' understands the need for you to ask additional questions to deliver the design The questions may be sent in written form and will be answered within two weeks. What additional question needs to be answered in order to collect needed information for tie WLAN design?

A customer wants to have the ability to show network usage. Which product would allow them to have this visibility?

A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge. The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use. The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would take to ensure redundant RADIUS resources in each of their three geographical regions (AMER. EMEA. and APAC) A large office location Is available in each region with sufficient VMware resources available. * Each region has between 4.435 and 5.859 clients, all of which will need to do either 802.1 X wired or wireless authentications as well as 802.1 X authentication for a single personal device on Wi-Fi. * All of the non-personal devices will also need to validate health with a local agent. * A total of 500 guests are expected to be connected on average with a maximum of 700 simultaneous connections malting use of Guest Portal for access to the internet. * TACACS authentication will also be configured for a total of 1200 evenly dispersed NADs. How many OnGuard Licenses are required in this scenario?

A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge. The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use. The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client decided that they would like to manage two wiring closets as a single stack with a total of 10 switches and a minimum transport speed or 25Gbps over OM4 MM fiber They would also like to keep the stacking cabling cost to a minimum. Which stacking components would be required to meet the customer's requirements in the most cost-effective way if the closets were 190 m (620 ft) apart? (Select two.)

A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch. The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single 0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft). For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power. The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs). the customer has no change in WLAN requirements. The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed. Based on the best practices, what should you recommend as the correct optic type for the connection between the IDF and the cabins?

Question 41

The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be In use.

The customer is also planning on renovating the corporate office space in order to take advantage of 'smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services.

The client has decided that more critical switch stacks supporting Contact Center resources will need to support greater than 600W of CL4 PoE and have redundant power supplies These stacks will have approximately six members.

What would be the most economical choice Aruba switch series to meet these requirements?

Aruba CX 6100

Aruba CX 6400

Aruba CX6300F

Aruba CX6200M

Show Answer Comment (0)

Question 42

The client would like 10 include Blue Dot location tracking in their four floors of corporate space. The APs are not Ideally placed to allow for smooth map transitions.

What could you add lo provide better tracking? (Select two.)

UXI sensors

beacons

more APs

Question 43

HOTSPOT

Based on this campus design, click on the layer that is the most appropriate to be designed as a Stub Persona, considering an EVPN VXLAN Fabric?

Show Answer Comment (0)

Question 44

XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites by enhancing wired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.

Locations:

- XYZ Regional Hospital Is located In New York City

- Dila Health Center Is located in City A

- Mount Health Center is located In City B

- Rock Health Center is located in City C

- Branch clinics are located at different locations across the United States

Requirements:

- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting.

- Seamless integration across wired, wireless. WAN, S0-8ranch. loT

* Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.

- All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified)

- Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication

- Identify and authenticate every wireless and wired device

- End-to-end role-based security

- Seamless mobility across the hospital tor medical teams, patients, and visitors

- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site

- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs

- Fully redundant branch solution with dynamic path selection to the hospital

XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements:

- fully redundant NAC solution for management and authentication

- wireless and wired authentication for the main hospital will be handled locally

- wireless and wired authentication for the health centers will be handled locally

- wireless and wired authentication tor the clinics will be authenticated against the main hospital NAC

- staff ustrs/devices should able to visit any site and haw the same experience

- support 35k devices

Locations:

- XYZ Regional Hospital is located in City 1 - 15k devices

- Dila Health center is located in City 2 - 8k devices

- Mount Health Center is located in City 3 - 5k devices

- Rock Health Center is located in City 4 - 4k devices

-125 branch clinics are located at different locations across the US - 2k devices

Which solution meets the customer's requirements?

Option A

Option B

Option C

Option D

Show Answer Comment (0)

Question 45

Locations:

- XYZ Regional Hospital Is located In New York City

- Dila Health Center Is located in City A

- Mount Health Center is located In City B

- Rock Health Center is located in City C

- Branch clinics are located at different locations across the United States

Requirements:

- Seamless integration across wired, wireless. WAN, S0-8ranch. loT

* Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.

- All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified)

- Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication

- Identify and authenticate every wireless and wired device

- End-to-end role-based security

- Seamless mobility across the hospital tor medical teams, patients, and visitors

- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site

- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs

- Fully redundant branch solution with dynamic path selection to the hospital

XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements:

- fully redundant NAC solution for management and authentication

- wireless and wired authentication for the main hospital will be handled locally

The IT director of XYZ Regional Hospital is interested in a solution tor nurse workstation tracking. What solution would meet the customer's requirements? (Select three.)

Aruba User Experience Insight

Airwave

Aruba Tags Configuration App

Asset Tracking Subscription

Client insight

Map Subscription

Show Answer Comment (0)

Question 46

You are delivering a replacement collapsed core network proposal to the customer where the core switches will have the switched virtual interlaces (SVl) configured. The customer is not sure that a USX pair of switches will Be able to act as I tie spanning tree root in their environment.

Which options are true about spanning tiee and VSX that will help assure the customer that a VSX pair of switches are appropriate for a collapsed core? (Select two.)

The primary vsx switch ts the spanning tree root and the default behavior is the links on the secondary vsx switch are blocked with sub-millisecond failover assured by vsx active-gateway.

When LAG interfaces are configured on a VSX pair of switches, both switches are 'operational primary' and ensure active-active LAG operation equally.

Both VSX switches are configured with the system MAC and then create unique STP bridge-IDs to identify 'operational primary' and 'operational secondary' for proper STP functioning

Aruba VSX switches support either multiple spanning tree (MSTP) or rapid per VLAN spanning tree (RPVST).

The ISL between VSX switches is never part of STP domain and doesn't send or receive BPDUs on this link and this ensures the 'operational primary' and 'operational secondary' switches are deterministic to other dual-attached switches.

Show Answer Comment (0)

Question 47

DRAG DROP

What documents should be included in the solution proposal? (Place the correct items into the list at the right. Order is not important. Not all options will be used)

Show Answer Comment (0)

Question 48

DRAG DROP

You are going with a 3-tier design and need to calculate the oversubscription ratio on the Access. Distribution. Core, and ToR Layer. What is a suitable oversubscription ratio for each layer?

Show Answer Comment (0)

Question 49

DRAG DROP

Match the deployment type to the estimated number of APs.

Show Answer Comment (0)

Question 50

You are responding to the customer's RFP and are at the point of documenting design decisions that were not specified in the RFP or the RFP questions. What are valid examples of assumptions made that should be presented to the customer during the response? (Select three >

The customer has technical staff that is capable of implementing the proposed equipment.

Optional monitoring systems (syslog, How collectors) exist.

Vendor equipment availability will meet customer project timelines.

Sufficient space and power exist to rack and turn up the proposed equipment.

Adequate virtual machine resources exist to successfully install required or optional management systems.

The customer budget Is sufficient to afford the proposed solution.

Show Answer Comment (0)

Total 70 questions