ExamGecko
Home Home / Microsoft / MS-203

Microsoft MS-203 Practice Test - Questions Answers, Page 12

Question list
Search
Search

List of questions

Search

Related questions


SIMULATION Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design. Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided. Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab. Use the following login credentials as needed: To enter your username, place your cursor in the Sign in box and click on the username below. To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: [email protected] Microsoft 365 Password: xxxxxx If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only. Lab Instance: XXXXXX You need to ensure that a notification email is sent to [email protected] when a user marks an email message as Not Junk in Microsoft Outlook. To complete this task, sign in to the Microsoft 365 admin center.









You recently implemented a hybrid deployment that contains a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 server named Server1. The public IP address of Server1 is 131.107.1.100.

The deployment is configured as shown in the following table.

Users hosted in Microsoft 365 report that they receive non-delivery reports (NDRs) when they attempt to send email messages to mailboxes hosted in Exchange Server 2019.

You need to ensure that the email is delivered successfully. The solution must ensure that email delivery is successful for all the users at your company.

What should you do?

A.

Configure the remote domain to use a value of contoso.com.

A.

Configure the remote domain to use a value of contoso.com.

Answers
B.

Modify the MX record to point to the internal Exchange servers.

B.

Modify the MX record to point to the internal Exchange servers.

Answers
C.

Configure the Outbound connector to use a smart host of 131.107.1.100.

C.

Configure the Outbound connector to use a smart host of 131.107.1.100.

Answers
D.

Configure the accepted domain to use a value of *.

D.

Configure the accepted domain to use a value of *.

Answers
Suggested answer: C

Your company named Contoso, Ltd. has a Microsoft Exchange Online subscription.

You have several transport rules. The rules automatically apply a disclaimer to email messages that contain certain keywords in the subject and are sent to recipients in an email domain named fabrikam.com. You receive a report that some messages are delivered without the disclaimer.

You need to view which transport rules were applied to messages sent to the fabrikam.com recipients. What should you use?

A.

the SMTP protocol logs

A.

the SMTP protocol logs

Answers
B.

a URL trace

B.

a URL trace

Answers
C.

the transport server logs

C.

the transport server logs

Answers
D.

a message trace

D.

a message trace

Answers
Suggested answer: D

Explanation:

Reference:

https://docs.microsoft.com/en-us/exchange/monitoring/trace-an-email-message/run-a-message-trace-and-view-results

You have a hybrid deployment between a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 organization. Several users hosted in Microsoft 365 report that when they send email messages to mailboxes hosted in Exchange Server 2019, the messages fail to be delivered. You need to examine the non-delivery reports (NDRs) sent to the Microsoft 365 mailboxes.

Which two actions should you perform? Each correct answer presents a complete solution.

NOTE: Each correct selection is worth one point.

A.

From an on-premises Exchange server, use the transport logs.

A.

From an on-premises Exchange server, use the transport logs.

Answers
B.

From an on-premises Exchange server, use the SMTP logs.

B.

From an on-premises Exchange server, use the SMTP logs.

Answers
C.

From the on-premises Exchange admin center, use a message trace.

C.

From the on-premises Exchange admin center, use a message trace.

Answers
D.

From the Exchange admin center, use a message trace.

D.

From the Exchange admin center, use a message trace.

Answers
E.

From the Exchange Management Shell, run the Get-Queue cmdlet.

E.

From the Exchange Management Shell, run the Get-Queue cmdlet.

Answers
Suggested answer: C, D

Explanation:

Reference:

https://docs.microsoft.com/en-us/exchange/monitoring/trace-an-email-message/message-trace-faq

You have a Microsoft Exchange Server 2019 organization.

You need to configure the organization to use Exchange Online Protection (EOP) for the message hygiene of all inbound and outbound email. Which three actions should you perform? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

A.

Install an Exchange hybrid server.

A.

Install an Exchange hybrid server.

Answers
B.

For the organization, configure an MX record that points to Microsoft Office 365.

B.

For the organization, configure an MX record that points to Microsoft Office 365.

Answers
C.

Create a hybrid organization relationship.

C.

Create a hybrid organization relationship.

Answers
D.

From the on-premises organization, create a connector to relay outbound email to Microsoft Office 365.

D.

From the on-premises organization, create a connector to relay outbound email to Microsoft Office 365.

Answers
E.

Create a Microsoft Office 365 Connector to the on-premises organization.

E.

Create a Microsoft Office 365 Connector to the on-premises organization.

Answers
F.

Create on-premises transport rules to control the outbound message flow.

F.

Create on-premises transport rules to control the outbound message flow.

Answers
Suggested answer: B, D, E

Explanation:

Reference: https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/use-connectors-to-configure-mail-flow/set-up-connectors-to-route-mail

Your company has a Microsoft Exchange Server 2019 hybrid deployment.

The company has a finance department.

You need to move all the on-premises mailboxes of the finance department to Exchange Online. The bulk of the move operation must occur during a weekend when the company's Internet traffic is lowest. The move must then be finalized the following Monday. The solution must minimize disruption to end users.

What should you do first?

A.

Create a batch migration and select the Automatically complete the migration batch check box.

A.

Create a batch migration and select the Automatically complete the migration batch check box.

Answers
B.

Run the New-MigrationBatch cmdlet and specify the StartAfter parameter.

B.

Run the New-MigrationBatch cmdlet and specify the StartAfter parameter.

Answers
C.

Run the New-MigrationBatch cmdlet and specify the CompleteAfter parameter. box.

C.

Run the New-MigrationBatch cmdlet and specify the CompleteAfter parameter. box.

Answers
D.

Create a script that moves most of the mailboxes on Friday at 22:00 and the remaining mailboxes on Monday at 09:00.

D.

Create a script that moves most of the mailboxes on Friday at 22:00 and the remaining mailboxes on Monday at 09:00.

Answers
Suggested answer: C

Explanation:

QSet 1

DRAG DROP

Your company has a Microsoft Exchange Online subscription for an email domain named contoso.com.

The company works with a partner company that uses an email domain named tailspintoys.com.

You need to configure the environment only to accept email from tailspintoys.com if the email is sent from an IP address of 131.107.12.85. How should you configure the connector from the Exchange admin center? To answer, drag the appropriate options to the correct message settings. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

NOTE: Each correct selection is worth one point.


Question 116
Correct answer: Question 116

HOTSPOT

You create a transport rule as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.


Question 117
Correct answer: Question 117

Explanation:

Reference:

https://docs.microsoft.com/en-us/powershell/module/exchange/policy-and-compliance/new-transportrule?view=exchange-ps

HOTSPOT

You have a Microsoft Exchange Online subscription that uses a namespace of litwareinc.com.

You create a connector in Exchange Online that is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.


Question 118
Correct answer: Question 118

HOTSPOT

You have a Microsoft Exchange Online tenant as shown in the following exhibit.

All email recipients have an email address that uses an SMTP suffix of @contoso.com.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.


Question 119
Correct answer: Question 119

Explanation:

Box 1:

Under “When to use this connector”, it says “Use only for email sent to these domains: *”

The asterisk means all domains so any external email will use the connector.

Box 2:

With Exchange Online, you don’t need to configure a receive connector as you would with on-premises Exchange. Therefore, the server by default will be able to receive emails from any email host.

HOTSPOT

You have a distribution group named Car Parking Distribution Group that is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.


Question 120
Correct answer: Question 120

Explanation:

Reference:

https://docs.microsoft.com/en-us/powershell/module/exchange/users-and-groups/set-distributiongroup?view=exchange-ps

Total 386 questions
Go to page: of 39