Exhibit. You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?

Add HOST 3's IP address to the NFS export policy.

Add NFSv4 to the access protocols.

Enable Kerberos in the export policy.

Add SMB/CIFS to the access protocols.

Add HOST 3's IP address to the NFS export policy.

Exhibit. Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?

NVMe Is not configured for the SVM.

FC has not been licensed on the cluster.

NVMe Is not configured for the SVM.

FC switch zoning has not been done correctly.

NVMe is not licensed on the cluster.

A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8. In this scenario, which two statements are true? (Choose two.)

Use SnapMirror to replicate data from FlexVol to FlexGroup.

You can convert the FlexVol volume to a FlexGroup volume.

Use XCP to copy data from a FlexVol to a FlexGroup.

Use SnapMirror to replicate data from FlexVol to FlexGroup.

You can convert the FlexVol volume to a FlexGroup volume.

A FlexVol to FlexGroup conversion is not supported.

All SMB users are reporting that their network share performance Is slow on a new NetApp FAS500f HA pair. You determine that the users have converged network adapters (CNAs) with flow control enabled and no option to disable.In this scenario, which two flow control settings are recommended on the NetApp ONTAP physical ports? (Choose two.)

Enable flow control end-to-end on data network ports.

Disable flow control end-to-end on cluster network ports.

Disable flow control end-to-end on data network ports.

Enable flow control end-to-end on cluster network ports.

Enable flow control end-to-end on data network ports.

Disable flow control end-to-end on cluster network ports.

You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10- GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task? (Choose three.)

Enable jumbo frames with an MTU of 9000 for your ESXi hosts.

Enable jumbo frames with an MTU of 9216 for your switches.

Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.

Enable jumbo frames with an MTU of 9000 for your ESXi hosts.

Enable jumbo frames with an MTU of 9216 for your switches.

Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.

Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.

Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.

You ate the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all NAS volumes. One of your users accidentally deleted an Important spreadsheet file on an SMB share. The file needs to be restored as quickly as possible by the Windows user.Which statement is correct in this scenario?

In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy It to the original location.

On the cluster CLI, execute the volume clone create command with the -parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back.

On the cluster CLI, execute the volume snapshot restore-file command with the options to select the Snapshot, path, and restore-path

In ONTAP System Manager, navigate to the volume where the share resides, click on snapshot copies and restore the latest Snapshot copy.

In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy It to the original location.

Exhibit. You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.Referring to the exhibit, which tool would you use to accomplish this task?

NetApp Interoperability Matrix (IMT)

You need to configure data-at-rest encryption for your NetApp ONTAP 9.8 cluster. Your company does not have Key Management Interoperability Protocol (KMIP) services available but must require a passphrase to be entered when a nodeIs rebooted.In this scenario, which two actions should be performed to satisfy these requirements? (Choose two.)

Configure an external key management server.

Enable cluster-wide FlPS-compliant mode.

Which two statements are true about NVMe? (Choose two.)

Namespaces are mapped to subsystems.

LUNs are mapped to Initiator groups.

Namespaces are mapped to subsystems.

After creating several volumes, you notice that the hosting aggregates Immediately show a decrease In available space. Which volume setting would prevent this outcome?

space guarantee set to "volume"

You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware Is located In two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover.In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)

Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.

Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.

Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.

Install the SnapMirror Sync license on the cluster.

Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.

Use ONTAP Select Deploy to Install the nodes on the physical hardware.

An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.Which NetApp solution would you propose to fulfill these requirements?

SnapMirror Business Continuity (SM-BC)

Exhibit. The availability of the remote cluster in the peering relationship shows "Partial." Referring to the exhibit, what is the reason for this status message?

Some nodes in the local cluster are not able to contact some or all nodes in the remote cluster.

The remote cluster does not have its cluster license applied properly.

The local cluster is unable to authenticate successfully to the remote cluster.

Some nodes in the local cluster are not able to contact some or all nodes in the remote cluster.

The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.

You are currently using SnapMlrror Synchronous (SM-S) to protect a critical workload at your organization and you want to convert the SnapMlrror policy from Sync to StrictSync.In this scenario, which procedure allows you to achieve this task?

Recreate the SnapMirror relationship, specifying the strictsync policy, then re-synchronize it.

Modify the existing SnapMirror relationship specifying the strictsync policy, then re-synchronize It.

Recreate the SnapMlrror relationship, specifying the strictsync policy, then promote It.

Modify the existing SnapMirror relationship specifying the strictsync policy, then promote It.

Windows 2019 reports 500 GB of free space on a disk; however, on the storage side, the LUN has 0 bytes free. When the host deletes files on the disk, auto reclaim on the thin-provisioned LUN does not occur.In this scenario, which action should you take to enable space reclamation?

Set the space allocation option to enable.

Set the space allocation option to disable.

Set the space allocation option to enable.

Enable space guarantees on the volume.

Enable space guarantees on the LUN.

You have created a new FlexCache cache volume and want to warm the cache before clients access the cache volume for the first time. In this scenario, how would you accomplish this task?

Prepopulate the cache volume with data from the origin volume using the flexcache prepopulate start command.

Enable block-level Invalidation using the volume flexcache origin config modify command.

Copy the data from the origin volume to the cache volume with the NetApp XCP Migration Tool.

Synchronize the origin and cache first with the volume flexcache sync-properties command.

Exhibit. You create a storage virtual machine (SVM) called SVM500 that is provisioned for iSCSI. After creating a LUN in the SVM and mapping it to an igroup, the attached VMware hosts are unable to mount the LUN.Referring to the exhibit, what is the issue?

The igroup contains multiple Initiators.

The igroup contains the wrong protocol.

The igroup contains multiple Initiators.

The initiator is a member of igroups of different OS types.

The igroup does not contain the appropriate initiators.

After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)

Create a LIF for SVM management.

Set a password for the vsadmin user account.

Create the vsadmin user account in the new SVM.

Create a LIF for SVM management.

Configure role-based access control (RBAC) for the vsadmin user account.

Set a password for the vsadmin user account.

Your company wants to Increase access security In both their NFS and ISCSI environments. Currently ISCSI Is not authenticated and NFS relies only on export policies for security.Which two enhancements do you use to satisfy this new criteria? (Choose two.)

Enable Kerberos for NFS exports.

Enable Challenge-Handshake Authentication Protocol (CHAP) for ISCSI LUN access.

Enable Kerberos for NFS exports.

Enable Kerberos for iSCSI LUN access.

Enable Challenge-Handshake Authentication Protocol (CHAP) for NFS exports.

Enable Challenge-Handshake Authentication Protocol (CHAP) for ISCSI LUN access.

After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports. In this scenario, which two methods would accomplish this task? (Choose two.)

Use the command line interface.

Network Appliance NS0-162 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

Exhibit.

Network Appliance NS0-162 image Question 1 78761 09232024011601000000

You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN In a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.

Network Appliance NS0-162 Practice Test 1

Question

Network Appliance NS0-162 Practice Tests

Practice Tests