You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)

Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.

Configure an authentication tunnel through an existing CIFS SVM.

Configure an authentication tunnel through an admin SVM.

Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.

Use the vserver active-directory create command to create a computer account on the domain for a CIFS SVM.

Configure an authentication tunnel through an existing CIFS SVM.

You need to Increase the number of files that can be created In a volume. Which two methods enable you to achieve this goal? (Choose two.)

Increase the number of files permitted on the volume.

Increase the size of the volume.

Increase the number of files permitted on the volume.

Set the space guarantee to 'volume".

Set the fractional reserve to "0".

Increase the size of the volume.

A volume Is set to use Adaptive QoS with the default policy.In this scenario, which change would affect the QoS throughput ceiling?

Disks are added to the volume's aggregate.

More clients access the volume.

You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.In this scenario, which NetApp tool would apply the best practice settings?

SnapCenter Plug-in for VMware vSphere

Exhibit. You have an ONTAP 9.8 cluster. After network maintenance, the LIF that is shown in the exhibit is not always on a correct port and is unreachable by users until the LIFs are moved to port eOc or eOd on either storage node.In this scenario, which action should you take to ensure that the LIF only fails over to the correct ports?

Create a DNS load balancing zone.

Change the LIF's failover policy to sfo-partner-only

Exhibit. A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.Referring to the exhibit, what is the problem?

The volume is not mounted In the namespace.

The host IP address does not match the export policy rule.

The volume is not mounted In the namespace.

The logical Interface does not allow the NFSv3 protocol.

Your company runs a NetApp AFF A220 cluster as a file server for NFS and SMB. You want to use one of the unused ports to connect a single Windows host directly, using FC. You have converted the UTA2 ports e0e and e0f to FC and equipped them with a 16-Gbps FC transceiver. Your Windows host fails to connect to the storage.In this scenario, which action solves the problem?

Use an FC switch between storage and host.

Use the arbitrated loop topology on storage and host.

Use the point-to-point topology on all ports.

Use an Ethernet switch between storage and host.

Which statement Is correct about Temperature Sensitive Storage Efficiency (TSSE)?

TSSE operations on a AFF array are automatically throttled depending on whether data Is hot or cold.

TSSE Is enabled automatically on newly created thick provisioned volumes.

TSSE operations on a AFF array are automatically throttled depending on whether data Is hot or cold.

TSSE operations on Cloud Volumes ONTAP are automatically throttled depending on whether data is hot or cold.

TSSE operations on ONTAP Select are automatically throttled depending on whether data is hot or cold.

Exhibit. You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SMS) for the data volumes In NFS-SVM-01.In this scenario, which solution Is supported to enable SMS in ONTAP 9.8 software?

Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.

Set up new SM-S relationships from the AFF A220 to a new destination.

Set up new SM-S relationships from the FAS2720 to a new destination.

Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.

Modify the existing SVM-DR policy to use sync mode.

When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true?(Choose two.)

The update history is available within the ONTAP System Manager interface.

The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.

The latest available Images will appear In the ONTAP System Manager interface.

The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.

The update history is available within the ONTAP System Manager interface.

The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.

Which two storage efficiency features are enabled by default on AFF systems? (Choose two.)

aggregate-level inline deduplication

volume-level Inline deduplication

aggregate-level inline deduplication

volume-level Inline deduplication

Exhibit. A user cannot save a file on an ONTAP SMB share.Referring to the exhibit, which action allows the user to save the file?

Let the user save the file to a writeable location.

Allow the file type, file In the CIFS Server policy.

Let the user save the file to a writeable location.

Synchronize the ONTAP Cluster time to the Active Directory time.

Set the user permission for the share to write.

Click the Exhibit button.(missing)A company has three servers that are using the iSCSI protocol to connect to a 2 node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. When you check the ONTAP cluster, you notice that the servers are togging into only the first controller.Referring to the exhibit, which two steps do you take to troubleshoot the issue? (Choose two.)

Verify that the ISCSI data protocol has been enabled on the ports.

Verify that each server has been rebooted.

Verify that the controller has not been taken over.

Which two storage efficiencies are enabled by default on NetApp AFF systems? (Choose two.)

postprocess zero block detection

A customer has a 2-node AFF A220 cluster and needs to enable the FC protocol. The onboard UTA2 ports are configured for 10Gbps Ethernet. In this scenario, what are two different methods to use FCP over the UTA2 ports? (Choose two.)

Connect onboard UTA2 ports to a Nexus switch and enable FCP.

Swap the Ethernet transceivers in the UTA2 ports for FC transceivers, and configure the ports as target ports.

Swap the Ethernet transceivers in the UTA2 ports for 1Gbps transceivers, and configure the ports as target ports.

Connect onboard UTA2 ports to a Nexus switch and enable FCP.

Swap the Ethernet transceivers in the UTA2 ports for FC transceivers, and configure the ports as target ports.

Change the existing UTA2 ports from 10 Gbps speed to 8 Gb speed.

The source NAS volume of a SnapMirror relationship is unavailable due to networking issues at your organization's primary data center. You want to make the destination NAS volume writable so that clients are able to access their data.Which two steps do you need to take to solve the issue? (Choose two.)

Break the SnapMirror relationship using the snapairrcr break command from the destination cluster.

Use the volume mount command to mount the NAS volume In the NFS namespace.

Break the SnapMirror relationship using the snapairrcr break command from the destination cluster.

Delete the SnapMirror relationship from the destination cluster.

Use the volume mount command to mount the NAS volume In the NFS namespace.

Break the SnapMirror relationship using the snapmirror break command from the source cluster.

You have a 4-node cluster with a NetApp AFF A400 HA pair and a NetApp FAS8700 HA pair running NetApp ONIAP 9.8 software. You are required to set up 2-factor authentication for the ONTAP CU.Which two authentication methods are required in this scenario? (Choose two.)

Security Assertion Markup Language (SAML)

Auditing has been enabled and configured on your ONTAP storage system. You have also created audit policies to monitor files and folders. Auditing has been running for over six months. You want to ensure that there have been no improper file access attempts.How would you accomplish this task?

Import EVTX files Into Microsoft Event Viewer.

Import EVTX files into Microsoft SQL.

Import EVTX files Into Microsoft Event Viewer.

Use Microsoft System Center to read EVTX files.

Use the Active IQ Web site to read EVTX files.

Exhibit You have a 4-node ONTAP cluster and use FCP to access several LUNs. You perform a volume move to move a LUN (/vol/sql01_sysdb/lun) from node na01-01 to na01-03. After the move, you perform an HBA rescan from the host, butALUA Is now seeing twice the number of paths to the LUN.Referring to the exhibit, which action would solve the problem?

Update the Selective LUN Map configuration for the LUN mapping.

Change the MPIO policy on the host.

Ensure that the fabric zoning is correct.

You are performing an ONTAP upgrade with an intercluster data protection SnapMirror relationship in this scenario, which two steps must be performed before an NDU? (Choose two.)

SnapMirror operations must be suspended.

The destination cluster must be upgraded first.

SnapMirror operations must be suspended.

The destination cluster must be upgraded first.

The source cluster must be upgraded first.

SnapMirror operations must be broken.

You have two ONTAP clusters and are setting up a new SnapMirror SVM replication (SVM DR) relationship. Which two statements are true in this scenario? (Choose two.)

The target SVM subtype must be dp-destination.

The target SVM subtype must be sync-destination.

The target SVM subtype must be dp-destination.

The source SVM subtype must be default.

The target SVM subtype must be sync-destination.

The source SVM subtype must be sync-source.

A node fails on an HA configuration. A successful failover occurs, but your clients that are using the SMB protocol complain that they are not able to access their data.In this scenario, what caused the problem?

The surviving node is not licensed for CIFS.

One of the cluster Interconnect ports on the surviving node failed.

The quota for the qtree has been reached.

The disk ownership did not transfer correctly.

Click the Exhibit button.You have an AFF A400 HA pair serving SMB locally and a FAS8300 HA pair serving SMB over FlexCache Both clusters are running ONTAP 9.8 software.In this scenario, which two protocol features are supported at the remote cache? (Choose two.)

SMB3 continuously available (CA) shares

Exhibit You have Installed a new ONTAP 9.8 cluster and want to move the e0e and e0c ports into a new broadcast domain. Referring to the exhibit, which action satisfies this requirement?

Use the broadcast-domain split command.

Use the irrDadcast-domain create command

Use the broadcast-domain split command.

Use ONTAP System Manager to create a new broadcast domain.

Use the broadcast-domain= merge command.

After deploying an AFF A400, you want to deploy a storage virtual machine (SVM) to serve SMB dat a. Which three conditions must exist in this scenario? (Choose three.)

You must have sufficient space for the root volume.

You must synchronize the cluster time.

You must have configured the export policies.

You must have sufficient space for the root volume.

You must have a non-root aggregate in the online state.

You must have encryption enabled on the root volume.

You must synchronize the cluster time.

You must have configured the export policies.

Exhibit You have a 2-node FAS8300 switchless cluster. You ran the performance capacity report to see the last hour of performance Referring to the exhibit, which two statements describe the performance? (Choose two.)

The CPU has been over utilized.

A storage failover event will cause performance issues.

The CPU has been underutilized.

The CPU has been over utilized.

A storage failover event will cause performance issues.

A storage failover event will have no performance degradation.

Network Appliance NS0-162 Practice Test 2 - Free Online Exam Prep & Questions

Which security method would be used to authenticate targets and Initiators In an ISCSI environment?

Become a Premium Member for full access

Unlock Premium Member

Network Appliance NS0-162 Practice Test 2

Question

Network Appliance NS0-162 Practice Tests

Practice Tests