A customer wants to use a Cisco Nexus 93180YC-FX switch to support the FC protocol for booting from SAN without having to deploy additional Cisco 900 Series MDS switches in their FlexPod Datacenter configuration.In this scenario, what is required for this solution?

The customer must directly connect the NetApp AFF system to the Cisco UCS Fabric InterconnectsD. The customer must add an expansion FC module to the 93180YC-FX switch

The customer must enable the FC license on the 93180YC-FX switch

The customer must deploy the 93180YC-FX switch as part of a Cisco ACI fabric

The customer must directly connect the NetApp AFF system to the Cisco UCS Fabric InterconnectsD. The customer must add an expansion FC module to the 93180YC-FX switch

You are designing a multi-site FlexPod Datacenter solution for a customer using MetroCluster over IP. The design should include a single set of compliant switches for the environment.Which two features are required to satisfy this requirement? (Choose two.)

support for Fibre Channel ports

support for an MTU size of 9216

support for unified switch ports

You are sizing a FlexPod Virtual Desktop solution for a customer with 500 virtual desktops in a shared Remote Desktop Services (RDS) topology.In this scenario, which Cisco best practice should you use?

You should avoid over-committing physical CPU resources for virtual machines

You should avoid placing more than 20 users per physical host

You should avoid over-committing physical CPU resources for virtual machines

You should avoid changing the virtual host disk queue depth

You should avoid multiple vCPUs per individual virtual machine

You have a FlexPod solution that consists of a NetApp AFF A800 storage system, a Cisco MDS 9148S switch, and a Cisco UCS 6232 Fabric Interconnect. You want to upgrade NetApp ONTAP software on the AFF A800 to take advantage of a new feature.In this scenario, which three tools would enable you to verify if the upgrade would be performed safely? (Choose three.)

NetApp Interoperability Matrix Tool

Cisco Data Center Network Manager

NetApp Interoperability Matrix Tool

Cisco Data Center Network Manager

Cisco UCS Hardware and Software Compatibility List

NetApp Active IQ Upgrade Advisor

What are three requirements for all FlexPod Datacenter solutions?(Choose three.)

a pair of Fabric Extenders in a redundant configuration

two Cisco UCS 6200, 6300, or 6400 Series Fabric Interconnects in a redundant configurationE. redundant boot-from-SAN LUN paths

two NetApp storage controllers in a high-availability (HA) pair configuration

a separate 100 Mbps Ethernet/1 Gbps Ethernet out-of-band management network

a pair of Fabric Extenders in a redundant configuration

two Cisco UCS 6200, 6300, or 6400 Series Fabric Interconnects in a redundant configurationE. redundant boot-from-SAN LUN paths

A customer wants to deploy a FlexPod Datacenter solution in a limited amount of rack space. After planning for the networking and storage devices required for the deployment, they realize they have six rack units of space remaining. They need to install as many servers as possible in this available rack space.In this scenario, which solution allows them to accomplish their objective?

eight Cisco UCS B200 M5 blade servers

three Cisco UCS C4200 rack servers

four Cisco UCS B480 M blade servers

six Cisco UCS C220 M5 rack servers

eight Cisco UCS B200 M5 blade servers

A customer is deploying a FlexPod Datacenter and planning to boot from SAN each their UCS blades using the Fibre Channel Protocol.In this scenario, which three actions would accomplish their objective? (Choose three.)

Use only a pair of Cisco Nexus 9318YC-FX switches

Create an igroup on the NetApp ONTAP storage system with the appropriate IQNs

Create an igroup on the NetApp ONTAP storage system with the appropriate WWPNs

Use only a pair of Cisco Nexus 9318YC-FX switches

Create an igroup on the NetApp ONTAP storage system with the appropriate IQNs

Use only a pair of Cisco Nexus 9336C-FX2 switches

Use a pair of Cisco MDS 9148T and a fair of Cisco 9336C-FX2 switches together

Create an igroup on the NetApp ONTAP storage system with the appropriate WWPNs

A customer is unhappy with their current data center infrastructure. They want to purchase a FlexPod system to replace it. The customer asks you to help them understand the benefits of Solution Support to determine which support model would suit them best.In this scenario, which three statements are correct? (Choose three.)

You have a single point of contact for all cases

Solution Support is a lower-cost support option

Issues are solved by solution experts

You have a single point of contact for all cases

Solution Support is a lower-cost support option

There is no need to diagnose the problem before you call support

Customers do not need to open tickets; all issues are automatically reported

Issues are solved by solution experts

Your environment currently has a 12-node NetApp cluster serving iSCSI. You need to add at least four more nodes to serve FC to your environment.In this scenario, what should you do?

You can safely add up to 4 more storage controllers in the current cluster

You can safely add up to 6 more storage controllers in the current cluster

You must create a new cluster with the new storage controllers

You can safely add up to 12 more storage controllers in the current cluster

A customer plans to decommission a Cisco UCS B-Series server, as part of this action, the customer disassociates the service profile from the currently assigned server.Which action is performed by UCS Manager in this scenario?

It reboots the primary Fabric Interconnect immediately

It recalculates the power allotment for each blade server within the chassis

It reboots the secondary Fabric Interconnect immediately

You want to ass a customer's NetApp storage controllers into their Cisco Intersight management portal.In this scenario, which IP address would you choose to add?

NetApp Active IQ Unified Manager IP address

NetApp SVM management IP address

NetApp Active IQ Unified Manager IP address

NetApp Virtual Storage Console IP address

You are asked to ensure link redundancy to your hosts using Virtual Port Channel (vPC). You are creating a vPC on a pair of Cisco Nexus switches.In this scenario, which two steps are required to accomplish this task? (Choose two.)

Configure the vPC peer keep-alive link

Set all vPC ports to switchport mode access

Configure the vPC peer keep-alive link

A partner wants to develop a FlexPod Datacenter solution for a customer that will use Cisco ACI.In contrast to a FlexPod solution with NX-OS, which two additional requirements must be satisfied? (Choose two.)

Use two Cisco Application Policy Infrastructure Controllers (APICs)

Deploy the Cisco Nexus 900 Series Switches in a leaf-spine topology

Use two Cisco Application Policy Infrastructure Controllers (APICs)

Deploy the Cisco Nexus 900 Series Switches in a core-edge topology

Deploy the Cisco Nexus 900 Series Switches in a leaf-spine topology

Use three Cisco Application Policy Infrastructure Controllers (APICs)

You have designed a FlexPod configuration with VXLAN configured on Cisco Nexus 9000 Series switches operating in NX-OS mode.Which two statements are true in this scenario? (Choose two.)

VXLAN supports the Spanning Tree Protocol for loop prevention

VXLAN is a Layer 2 overlay scheme over a Layer 3 network

VXLAN segments are independent of the underlying network topology

VXLAN is supported only on Cisco MDS 9000 Series switches

VXLAN supports the Spanning Tree Protocol for loop prevention

VXLAN is a Layer 2 overlay scheme over a Layer 3 network

You are working with a customer on a new FlexPod solution. The customer advises you that they want a single point of contact for support issues.In this scenario, which two support solutions should you offer the customer? (Choose two.)

NetApp Solution Support for FlexPod

A customer wants to deploy a FlexPod Datacenter solution that supports a secure multitenant design with VMware vSphere 6.x as the hypervisor. The customer wants to ensure that virtual machines are encrypted in transit and at rest and restricted to their specified tenant.Which component should the customer use to implement this capability?

VMware vSphere virtual machine encryption

Which two support account levels are minimally required when you deploy a FlexPod Datacenter solution?(Choose two.)

NetApp SupportEdge Advisor 24x7x4

Cisco SmartNet Total Care 24x7x4

NetApp SupportEdge Advisor 24x7x4

What are the 1U, rack mountable, Fabric Extenders (FEX) used for in a FlexPod environment?

to allow for the UCS C-Series to be connected to the Fabric Interconnects

to allow for the UCS S-Series to be connected to the Fabric Interconnects

to allow for extra UCS Blade Chassis to use the Fabric Interconnects

to allow for the UCS B-Series to be connected to the Fabric Interconnects

Which three cables are allowed to be used between a NetApp cluster node and a Nexus switch for use with a port channel?(Choose three.)

seven meter Active Optical Cable (AOC)

five meter OM4 fiber optic cable

seven meter OM4 fiber optic cable

seven meter Active Optical Cable (AOC)

five meter OM4 fiber optic cable

seven meter passive Twinax cableD. five meter passive Twinax cable

seven meter OM4 fiber optic cable

Network Appliance NS0-175 Practice Test 1 - Free Online Exam Prep & Questions

You are sizing a FlexPod Datacenter solution for multitenancy use.

What are two important platform scaling considerations in this scenario? (Choose two.)

maximum NetApp ONTAP cluster limits

maximum NetApp ONTAP storage VM limits

maximum Cisco vPC interfaces between Fabric Interconnects

maximum Cisco L1, L2 interfaces between Fabric Interconnects

Comment (0)

Network Appliance NS0-175 Practice Test 1

Question

Network Appliance NS0-175 Practice Tests

Practice Tests