You received from a customer the requirements shown below.-- 25 servers-- 25GbE connectivity-- NFS and iSCSI protocols-- 30 TB flash storage-- 50 TB hybrid storageIn this scenario, which FlexPod solution would satisfy the requirements?

Cisco UCS 6332 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS8300

Cisco UCS 6454 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS2750

Cisco UCS 6332 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS8300

Cisco UCS 6454 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS8300

Cisco UCS 6324 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9300 Series, NetApp AFF A400, and FAS2750

A customer wants to upgrade their current VMware vSphere 6.5 environment to vSphere 7.x.Where would you go to determine which Cisco UCS configurations support this goal?

Cisco UCS Hardware and Software Compatibility List

NetApp Product Documentation Guides and Resources

A customer wants a low latency and high IOPS FlexPod solution and decides on an end-to-end NVMe design.In this scenario, which three components are required to accomplish this task? (Choose three.)

NetApp AFF with a 32Gbps FC HBA

Cisco UCS Virtual Interface Card (VIC) 1400 series

NetApp FAS with a 32Gbps FC HBA

Cisco Application Policy Infrastructure Controller (APIC)

NetApp AFF with a 32Gbps FC HBA

Cisco UCS Virtual Interface Card (VIC) 1400 series

A customer wants to refresh their FlexPod solution by moving from 10 Gbps to 40 Gbps networking. They use FCoE to boot from SAN.In this scenario, which statement is true?

FCoE is supported on only 10 Gbps unified adapters

FCoE is supported for 32 Gbps adapters B.FCoE is supported for 25 Gbps adapters

FCoE is supported for 40 Gbps adapters

FCoE is supported on only 10 Gbps unified adapters

You want to use Cisco UCS Manager on the Fabric Interconnects to manage attached C-Series servers.Which two connection topologies would satisfy the requirements? (Choose two.)

Servers directly connected to the Fabric Interconnects

Fabric Interconnects uplinked to MDS switches

Fabric Interconnects uplinked to Nexus switches

Servers directly connected to the Fabric Interconnects

Fabric Interconnects uplinked to MDS switches

Fabric Interconnects uplinked to Fabric Extenders

A customer wants to deploy Cisco Intersight into their FlexPod environment. The customer is using the Cisco Intersight SaaS model.In this scenario, which two virtual machines are required to support this requirement? (Choose two.)

NetApp Active IQ Unified Manager

Cisco Intersight Virtual Appliance

NetApp Active IQ Unified Manager

Cisco Intersight Virtual Appliance

In which two sources would you verify scale out maximums for NetApp and Cisco UCS environments? (Choose two.)

Cisco UCS Hardware and Software Compatibility List

A customer is performing a server refresh of their FlexPod solution to accommodate business growth. The customer is interested in using Cisco C-Series servers, and supporting multiple 40 Gbps link to each server, upgrading from the existing 10 Gbps links.Which two VICs support these requirements? (Choose two.)

Cisco UCS 1497 VIC C. Cisco UCS 1495 VIC

During a design meeting, a customer states that their goal is to deliver continuous availability across both network and storage during business continuity events. The customer has two data centers that are 80 km apart, and they want the configuration to be as logically unified across both sites as possible.In this scenario, which FlexPod data protection solution achieves this goal?

FlexPod with NetApp MetroCluster IP

A customer has reviewed the latest vSphere CVD and asks you if they can use their older Cisco servers in the new FlexPod solution and still have supported configuration.Which statement is true in this scenario?

FlexPod configurations are fully supported if they follow a specific Cisco Validated Design.

FlexPod configurations are fully supported if they follow the technical specifications and compatibility matrices.

FlexPod configurations are fully supported if they follow a specific Cisco Validated Design.

FlexPod configurations are fully supported regardless of the equipment used.

FlexPod configurations are fully supported if they follow a specific NetApp Verified Architecture.

You have taken over management of an existing FlexPod system as part of a new job role. You want to find details of existing support and service contracts available for the system.Which two resources would you use to find this information? (Choose two.)

NetApp Interoperability Matrix Tool

Cisco Device Coverage Checker Tool

Network Appliance NS0-175 Practice Test 2 - Free Online Exam Prep & Questions

Click the Exhibit button.

Network Appliance NS0-175 image Question 41 79133 09232024011621000000

You are building a new FlexPod system booting from SAN.

Referring to the exhibit, how many paths will there be to the target LUN?

Become a Premium Member for full access

Unlock Premium Member

Network Appliance NS0-175 Practice Test 2

Question

Network Appliance NS0-175 Practice Tests

Practice Tests