You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.Which action must be taken to solve the problem?

Install the reference configuration file.

Install the CSHM configuration file.

Install the reference configuration file.

You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither "un-failing" nor reseating the drive helped to repair it.You must ensure proper replacement of the failed drive.In this scenario, which two actions should you take? (Choose two.)

Ask the customer for a drive with the same capacity and replace it.

Run Active IQ Config Advisor to collect all the logs on the system.

Ask the customer to open a technical case with NetApp Support.

Ask the customer for a drive with the same capacity and replace it.

Run Active IQ Config Advisor to collect all the logs on the system.

Power off the system until the drive has been replaced.

Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)

The LIFs must use the default intercluster service policy.

The LIFs must be in dedicated broadcast domains an IPspaces.

The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.

The LIFs must use the default intercluster service policy.

The LIFs must be in dedicated broadcast domains an IPspaces.

At least one LIF per node is required on each cluster.

Your customer wants to know more about the network configuration within the cluster.In this scenario, which statement is correct about a LIF?

A LIF is an IP address or a WWPN that is associated with a port.

A LIF is a port that provides physical connections.

A LIF is created within a broadcast domain and contains a pool of IP address.

A LIF is an IP address or a WWPN that is associated with a port.

A LIF separates network domains to access cluster data.

Click the Exhibit button. Immediately after installing a 4-node FAS8200 cluster, you discover that node, "cluster1-02", must be removed from the cluster. You want to use the cluster remove-node command to remove the node.Referring to the exhibit, which two statements are correct? (Choose two.)

Verify that high availability is configured for failover to the HA partner, then remove the node.

Move Epsilon to cluster1-02, then remove the node.

Verify that high availability is configured for failover to the HA partner, then remove the node.

Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.

Move Epsilon to cluster1-02, then remove the node.

Remove the node, then the cluster will elect a new master to remain in quorum.

Your customer plans to expand a 2-node FAS2750 switched cluster with two new controllers.In this scenario, which two prerequisites should you examine in advance? (Choose two.)

Verify that the existing cluster has a minimum 10 GB of free space for root volumes.

Verify that the platform of the new controllers can be mixed with the cluster's existing controllers.

Verify that the hard drives of the new controllers are compatible with the old controllers.

Verify that the existing cluster has a minimum 10 GB of free space for root volumes.

Verify that the existing switches support the additional controllers.

Verify that the platform of the new controllers can be mixed with the cluster's existing controllers.

You are setting up a peer relationship between two ONTAP clusters.In this scenario, which two statements are true regarding authentication?

Peering authentication status can be verified with the cluster peer show command.

Peering authentication can use an ONTAP generated passphrase.

Peering authentication status can be verified with the cluster peer show command.

Peering authentication can be configured using LDAP users and groups.

Peering authentication is required before enabling peering encryption.

Peering authentication can use an ONTAP generated passphrase.

After adding two nodes to an FC-enabled cluster, the storage administrator wants to ensure that existing LUNs can use paths on the new nodes.What is required to complete this task?

Use the storage port rescan command.

Use the lun mapping add-reporting-nodes command.

Use the storage port rescan command.

Use the lun mapping add-reporting-nodes command.

Use the lun bind create command.

Rescan the bus on the hosts by using the rescan-scsi-bus.sh script.

On which type of network interfaces are the cluster interconnect LIFs created?

on a UTA port shared with other LIFs

A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2- node FAS8300 cluster. The storage administrator wants to preserve the existing data.In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

the ability to create a 4-node MetroCluster across the four nodes

the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

the ability to move the volumes from the old nodes to the new nodes

the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s

the ability to create a 4-node MetroCluster across the four nodes

the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

Network Appliance NS0-184 Practice Test 2 - Free Online Exam Prep & Questions

A customer is asked to install a new AFF ASA A700 system. During the installation, the customer asks if ONTAP 9.8 is supported with their host's OS version running Windows 2016.

In this scenario, which NetApp tool would verify supportability?

Become a Premium Member for full access

Unlock Premium Member

Network Appliance NS0-184 Practice Test 2

Question

Network Appliance NS0-184 Practice Tests

Practice Tests