When booting your NetApp storage system for the first time the system fails to boot.What should you do first to address this problem?

You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.

You turn off your storage system and disk shelves, and then turn on the disk shelves. You then check the quick reference card that came with the disk shelf for information about LED responses.

You re-download the boot image to the compact flash card, then reboot the system.

You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.

You verify disk shelf compatibility and check the disk shelf IDs to verify that the disk shelf 1 (for DS14 series) must be connected to your system.

Which configuration for primary block (FC and iSCSI) data does NetApp best practices recommend?(Choose two.)

dual controller multiple shelves

single controller multiple shelves

dual controller multiple shelves

You are about to replace a failed Brocade Fibre Channel switch. Which three steps do you take prior to connecting the switch in the SAN? (Choose three.)

Change the domain ID of the replacement switch to the domain ID of the failed switch.

Clear all zoning configurations on the replacement switch.

Change the core PID format of the replacement switch to the core PID format of the failed switch.

Force the new switch to be the principle switch.

Change the domain ID of the replacement switch to the domain ID of the failed switch.

Clear all zoning configurations on the replacement switch.

Change the core PID format of the replacement switch to the core PID format of the failed switch.

Preload the zoning information from the fabric onto the new switch.

Which commands allow you to enable NetApp deduplication and verify space savings?

sis on <vol>, sis start <vol>, df s <vol>

asis on <vol>, asis start <vol>, df s <vol>

sis on <vol>, sis start <vol>, df r <vol>

Which row of items should you look up in the IMT (Interoperability Matrix Tool) when designing a NetApp Storage Solution for a customer?

Host OS & patches, HBA driver, Volume Manager, File System, Clustering

Host OS & patches, FC WWPN, Volume Manager, File System version

Host OS, iSCSI IQN, Volume Manager, Clustering

Host OS & patches, HBA driver, Volume Manager, File System, Clustering

Host OS, HBA driver, Host Memory & CPU Speed, File System, Clustering

Which statement is correct regarding virtual machine alignment on VMware ESX?

Alignment issues can occur on any protocol including FCP, iSCSI, FCoE, and NFS

RDM LUNs do NOT suffer from alignment problems because they are accessed directly by VMs.

A VMFS LUN with a LUN type of VMware, will always have properly aligned VMs.

Alignment issues can occur on any protocol including FCP, iSCSI, FCoE, and NFS

msinfo32 or mbrscan can be run for the ESX service console to check for proper alignment of VMs.

A customer has an existing legacy ISCSI storage environment that is connected to upstream network switches with various Windows hosts. The customer wants to purchase a new Netapp array to migrate their dat a. In this scenario which two tools would help to validate the prerequisites for this Netapp configuration? (choose two)

Interoperability Matrix Tool (IMT)

You have implemented FabricPool on your AFF ASA ONTAP 9.8 Cluster. An archived database has become very active, and it requires FabricPool adjustments.Which two steps are required to address this issue? (Choose two)

Use the promote cloud-retrieval-policy

Set the space-guarantee on the volume

You have deployed an AFF 400 systems for ISCSI workloads and want to ensure maximum performance to the hosts.In this scenario, which two steps should be configured? (Choose two)

Enable Jumbo frames on the network switch

Enable Jumbo frames on the broadcast domain

Enable Jumbo frames on the network switch

Enable Jumbo frames on the broadcast domain

Enable Jumbo frames on the IPspace

You are a system administrator and responsible for a Netapp AFF A800 2-node ONTAP 9.8 cluster that is used only for SAN. Your SAN uses FC and FCoE on the same Cisco switches. You want to add NVMe from the ONTAP controller to the same Cisco fabric. Which two statements are correct in this scenario? (choose two)

The same SVM can serve both the FC and the FCoE protocols

FC and NVMe can share the same 32 GB physical port

The same SVM can serve both the FC and the FCoE protocols

The same SVM cannot serve both the FC and the NVMe protocols

FCoE and NVMe can share the same physical port

FC and NVMe can share the same 32 GB physical port

You want configure namespaces to support NVMe over Fibre Channel (NVMe/FC) using ONTAP 9.8.Which action will accomplish this task?

Configure a LIF for the NVMe protocol

Add FC to the list of SVM protocols

Remove any protocols from the SVM before adding the NVMe protocol

Enable ALUA on the namespaces that should use the NVMe protocol

Configure a LIF for the NVMe protocol

Referring to the exhibit, which security feature would guarantee that the host A system that is mapped to LUN XYZ on the NetApp storage system is the only host that access the LUN?

CHAP configured on HOST A and the NetApp Storage System

igroup setup with the IQN of the ISCSi software initiator on Host A.

CHAP configured on HOST A and the NetApp Storage System

IPsec configured on both host A and the NetApp Storage System

You are asked to configure a small environment for a branch office. The customer has two new VMware ESXI hosts and a Netapp FAS2750 for the site. They want to allocate 10 GB for their ISCSI network to be used for datastores.However, they do not want to purchase any new switches for the environment. In this scenario, Which statement is correct?

Configure direct attached connections between the two hosts and storage

The SMB protocol will need to be used

10 GB switches are required for this configuration

The environment will have to be configured with 1 GB networking

Configure direct attached connections between the two hosts and storage

You have a two node Netapp ONTAP cluster that is hosting FC LUNs for 90 SAN hosts. The hosts are experiencing occasional performance problems and receiving QFULL responses from the cluster nodes. Which action would solve this issue?

Configure additional FC target ports

Increase the queue depth on the target ports

Configure additional FC target ports

Increase the queue depth on the initiator ports

Configure additional FC ports on the hosts

An administrator is asked to provision a SAN environment in which host applications can monitor LUN space and performance space reclamation.Which LUN type would satisfy these requirements?

NetApp thick provisioned volume

Which two requirements must be satisfied to run an Upgrade Advisor report on a Netapp All SAN Array? (choose two)

The cluster nodes must have a valid support contract

The vsadmin account must be enabled

The Connectivity, Liveness, Availability Monitor (CLAM) must be enabled

During maintenance of an AFF A250 node, you want to move the SAN LIFs that are members of a port set. In this scenario, which two statements are true? (choose two)

The LIF must be removed from the port set

You must take the SAN LIF offline

You must disable SLM for the node that hosts the LIF

You need to disable the zoning of the LIF WWPN

The LIF must be removed from the port set

You must take the SAN LIF offline

Which FC service is used by a host for discover service to locate FC targets that are available?

The fabric configuration server

Network Appliance NS0-520 Practice Test 5 - Free Online Exam Prep & Questions

You are booting a NetApp storage system for the first time. In which order should the various components be powered on?

Become a Premium Member for full access

Unlock Premium Member

Network Appliance NS0-520 Practice Test 5

Question

Network Appliance NS0-520 Practice Tests

Practice Tests