You want to perform online data migration using Foreign LUN Import. In this scenario, which two conditions are required to support this task? (choose two)

FCP protocol LIFs must be added to the data SVM

FCP initiator ports must be available

ISCSI protocol LIFs must be added to the data SVM

ISCSI targets must be added to the ONTAP ISCSI initiator

FCP protocol LIFs must be added to the data SVM

FCP initiator ports must be available

A customer wants to deploy NVMe/FC along with an existing FC SAN fabric using ONTAP 9.8. In this scenario, which two actions are correct? (choose two)

Use existing zoning on fabric switches

Enable NVMe/FC on the existing FC SVM

Use existing zoning on fabric switches

Enable NVMe/FC on the existing FC SVM

Upgrade your FC switches from 16GB to 32GB

Create new zoning on fabric switches

File deletions from a SAN-attached host that is using Windows Server 2016 are not freeing up space in LUN lun3. Referring to the exhibit, which setting is preventing the SCSI UNMAP operation?

Space Allocation is set to disabled

Space reservation honored is set to false

Space reservation is set to disabled

Clone Autodelete Enabled is set to false

Space Allocation is set to disabled

You created a LUN in a new volume on your Netapp ONTAP cluster. You enabled the default snapshot schedule and enabled snapshot autodelete on the volume. In this scenario, in which three situations does the snapshot autodelete feature automatically delete snapshot copies in the volume? (choose three)

The snapshot reserve space is nearly full

The overwrite reserve space is full

The snapshot reserve space is nearly full

The overwrite reserve space is full

You are installing an AFF A250 system with ONTAP 9.8 software. Your customer asks you about the recommended LIF configuration for the ISCSI protocol. In this scenario, which two statements are correct(choose two)

Each node in an ISCSI configuration must be connected to a minimum of two ethernet switches

Each SVM in an ISCSI configuration must have a minimum of two LIFs per node

Each node in an ISCSI configuration must be connected to a minimum of two ethernet switches

All LIFs from the SVM are connected to a single Ethernet switch

Each SVM in an ISCSI configuration must have a minimum of two LIFs per node

Each SVM in an ISCSI configuration must have a minimum of one LIF per node

You are configuring a new Netapp ONTAP cluster and are connecting the nodes to Cisco MDS SAN switches. You connect one of the nodes to switch port fc1/11 and run the commands that are shown in the exhibit. The SAN LIFs are enabled but are not operationally online, and none of the SAN hosts can access their LUNs on the ONTAP cluster.In this scenario, which configuration would cause this problem?

NPIV is not enabled on the switches

Interoperability mode is not enabled on the switches

The in-order guarantee is not enabled on the switch

NPV is not enabled on the switches

NPIV is not enabled on the switches

An administrator enabled the FCP protocol on an SVM and created a boot LUN for a Windows Server 2019 server host. The host is attached using multiple paths to the storage SVM. After correctly adding the LUN to the igroup and setting its LUN ID to 1, the host is unable to boot using the installed FC HBA.

During the boot process, using FCP is not supported by Netapp

During the boot process, using FCP is not supported by Microsoft

An administrator is configuring their existing Ethernet network switches to provide ISCSI LUNs to several servers. The network switches are also used for other traffic from various hosts. In this scenario, which statement is true?

Use multiple VLANs to isolate traffic from other network traffic

Increase the ratio of access ports to trunk ports to 2:1

Configure the MTU size to be larger on the switch and storage than on the host.

Use multiple VLANs to isolate traffic from other network traffic

Netapp recommends using the same LIFs for NFS and ISCSI traffic

You need to migrate boot LUNs from a third-party array onto a Netapp FAS8700. Which three actions are required to complete this task? (choose three)

Verify third-party array support by using the Interoperability Matrix Tool (IMT)

Convert a single FC port on each controller to an FC initiator port

Create zoning between the third-party array to the FAS8700

Reboot the third-party SAN to prepare for the LUN Import

Verify third-party array support by using the Interoperability Matrix Tool (IMT)

Convert every FC target port on each controller to an FC initiator port

Convert a single FC port on each controller to an FC initiator port

Create zoning between the third-party array to the FAS8700

You want to use ANA on SUSE Enterprise Linux. Which two components need to be verified in this scenario? (choose two)

Verify the version of SUSE Enterprise Linux

Verify that ALUA must be enabled

Verify that the ANA driver is installed

You are configuring a VMware sphere host for FC access to a Netapp ONTAP cluster. In this scenario, which two tasks does Netapp recommend performing on the Vsphere host? (choose two)

Use the Netapp Virtual Storage Console to configure the host settings

Set the queue depth on the host to 8

Zone the host by using the host WWNNs

Use the Netapp Virtual Storage Console to configure the host settings

An administrator has migrated an ISCSI LUN with Foreign LUN Import (FLI) tool. The migrated LUN is presented on the new system, but it is not visible to the host. In this scenario which additional action must be completed to make theLUN visible?

Install ANA software on the host

What are two benefits of implementing VLANs for ISCSI configuration? (choose two)

Reduced number of broadcast domains

Referring to the exhibit, which two actions would you perform to ensure that each host has valid multipathing? (choose two)

Verify that the VLANs are properly configured on the switches

Verify that the VLANs are properly configured on the ONTAP cluster

Verify that the VLANs are properly configured on the switches

Verify that the VLANs are properly configured on the ONTAP cluster

Verify that ALUA is enabled on the switches

Verify that ISCSI service is started on the ONTAP cluster

You install an ASA AFF A400 system with 32 GB FC SFP+ modules in port 0e and 0f. After creating the SVM and configuring the FCP protocol, the physical port stays offline. Referring to the exhibit which statement is correct?

The current mode to the ports must be configured as an FC port

The current type of the ports must be configured as an initiator

The current mode to the ports must be configured as an FC port

The current mode for the ports must be set as an NVMe/FC port

The admin status is manually set to down

In an NVMe/FC environment, the host cannot discover the namespace on the AFF system. Referring to the exhibit, what is the problem?

The host MPIO drivers are not installed

NVMe is not supported on the FC adapter

The NVMe service is not running on the SVM

After performing failover testing on a newly deployed MetroCluster configuration, some aggregates remain in a degraded state. Referring to the exhibit, which statement is true?

The MetroCluster Tiebreaker software is misconfigured

The ONTAP Mediator service is misconfigured

A cluster switch is powered off

While changing the network connections on your ONTAP cluster from twinax to fiber, the ports experience network connectivity issues. You want to verify which speeds the ports support and ensure that you have supported transceivers. In this scenario which two actions would accomplish this task (choose two)

Use hardware universe to determine the supported transceivers

Use hardware universe to determine the supported port speeds

Use hardware universe to determine the supported transceivers

Use the interoperability matrix tool to determine the supported port speeds

Use hardware universe to determine the supported port speeds

Use the interoperability matrix tool to determine the supported transceivers

You are testing FCP paths failures on a 2-node Netapp AFF All SAN Array and verify that persistent ports are correctly enabled. Before testing, a host sees four optimized paths to a LUN. You perform a node takeover and re-check the host.Which statement is true after the node takeover?

The host sees four optimized paths to the LUN

The host sees two non-optimized paths and two dead paths to the LUN

The host sees two optimized paths and two non-optimized paths to the LUN

The host sees two optimized paths and two dead paths to the LUN

You upgraded your Linux hosts to SUSE Enterprise Linux 15. In this scenario, which two actions should you perform before you test asymmetric namespace access (ANA)? (Choose two)

Verify if the NVMe service has started

Verify if the version of Netapp ONTAP software is 9.5 or later

Verify if the NVMe service has started

Verify if the LUNs and namespaces are in the same volume.

Verify if the version of Netapp ONTAP software is 9.5 or later

Verify if there is only one LIF in the SVM

You want to move a SAN LIF and preserve its configuration information and avoid rezoning the switch fabric. In this scenario, which two steps must be performed to fulfill this goal? (Choose two)

Take the SAN LIF offline before it is moved

Move the SAN LIF to another node in a cluster on existing storage virtual machine (SVMs)

Move the SAN LIF to another node in a cluster on a different storage virtual machine (SVMs)

Keep the SAN LIF online before it is moved

Take the SAN LIF offline before it is moved

Move the SAN LIF to another node in a cluster on existing storage virtual machine (SVMs)

During testing, an administrator notices that the wrong subsystem was returned using the NVMe discover command. The administrator was expecting test0_subsystem as the subsystem Referring to the exhibit, what would cause the discrepancy?

The wrong NQN was mapped to the subsystem

The wrong WWPN was used in the discovery command

Asymmetric Namespace Access (ANA) was not properly configured

The NVMe was not configured on the test0 SVM

Your customer asks you to configure a newly installed FAS8300 for an FC host connection.Referring to the exhibit, which step accomplishes this task?

Configure the ports 0e and 0f as type of target

Configure the ports 0e and 0f as a mode of CNA

Configure the ports 0e and 0f as type of target

Configure the ports 0e and 0f as status admin up

Configure the ports 0e and 0f as status admin down

A database administrator needs to ensure that snapshot copies of database files across multiple LUNs are taken at the same point in time. Which action achieves this outcome?

Create each LUN within the same FlexVol volume

Create each LUN on the same Fabric Pool aggregate

Add each LUN volume to the same snapshot schedule

Create each LUN within the same FlexGroup Volume

Your customer asks you how to connect a host for SAN access to the newly installed AFF A400 system. In this scenario, which two statements are correct? (choose two)

Direct Connection to the nodes from the hosts with ISCSI is supported

Direct Connection to the nodes from the hosts with FC is not supported

Direct Connection to the nodes from the hosts with ISCSI is supported

Direct Connection to the nodes from the hosts with ISCSI is not supported

Direct Connection to the nodes from the hosts with FC is not supported

Direct Connection to the nodes from the hosts with FC is supported

You have finished deploying a Netapp AFF All SAN Array Cluster and want to test the persistent ports feature. In this scenario, how would you accomplish this task?

Disconnect an FCP initiator port

Network Appliance NS0-520 Practice Test 6 - Free Online Exam Prep & Questions

You are configuring a Windows Server 2019 system to attach to an ISCSI presented LUN. There are multiple physical paths from the Windows Server to the Netapp Cluster. Which two changes are required to the Windows Server to enable multipath? (choose two)

Become a Premium Member for full access

Unlock Premium Member

Network Appliance NS0-520 Practice Test 6

Question

Network Appliance NS0-520 Practice Tests

Practice Tests