Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS (DDNS) capability available in NetApp ONTAP to easily advertise both data UFs to their clients.Currently. DNS is only responding with one data LIF. DDNS is enabled on the domain controllers. Referring to the exhibit, which two actions should be performed to enable DDNS updates to work?(Choose two.)

Disable the -vserver-fqdn parameter for the SVM DDNS services.

Enable the -is-enabled parameter for the SVM DDNS services

Disable the -vserver-fqdn parameter for the SVM DDNS services.

Remove the NFS protocol from the cifs_01 data LIF.

Enable the -use-secure parameter for the SVM DDNS services.

Enable the -is-enabled parameter for the SVM DDNS services

A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM. Referring to the Information shown in the exhibit, what Is the source of the problem?

The databases On Node03 must be Switched from secondary to master.

The aggregate aggr2 has a failed disk.

The databases On Node03 must be Switched from secondary to master.

The broken disk in Node03 is the source of the problem.

You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination system. They are worried about high CPU and disk usage without any user operations.In this situation, what should you tell the customer?

Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.

Explain that background tasks such as SnapMirror throttle up in the absence of user workload.

Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.

Explain that only user workload should use the CPU and Investigate further.

You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail over across subnets.How would you accomplish this task?

Configure an equal number of UFs on each subnet.

Configure a I IF failover policy for each subnet inside a single broadcast domain.

Which two statements about NetApp Cloud Volumes ONTAP licenses ate true? (Choose two.)

Capacity-based license packages support only single-node configurations.

BYOL licenses are purchased directly from NetApp.

Having an Essentials package enables you to convert to another licensing option.

Capacity-based license packages support only single-node configurations.

BYOL licenses are purchased directly from NetApp.

AWS Marketplace contracts cannot be mixed with BYOL.

Your customer complains that u host will constantly report losing a connection to the iSCSl target and then report that the session was reestablished. As shown in the exhibit, what is a cause of this flapping?

A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are accessing the same LUN.

A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the same IQN.

A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are in different initiator groups.

A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are accessing the same LUN.

A host with an IP address of 172.20.10.80 and a second IP address of 10.10.20.60 is accessing different LUNs.

A storage administrator reports that a monitoring toot is reporting that the storage controller reads between 90% to 93% CPU use. You run the sysstat -m command against the node in question. Referring to the exhibit, which statement is correct?

You should immediately investigate further by gathering perfstat data and opening a support case.

The customer should be advised to exclude certain workflows to reduce use.

High network exempt use could be a problem.

You should immediately investigate further by gathering perfstat data and opening a support case.

The CPU Is not a first-order monitoring metric for ONTAP.

Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer version. After investigating the event logs and the SnapMirror history, you see information about delayed updates of theSnapMirror relationships.How would your customer prevent such problems in the future?

Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.

Quiesce the SnapMirror relationships before upgrading the ONTAP software.

Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.

Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.

Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.

A customer enabled NFSv4.0 on an SVM and changed the client mount from NFSv3 to NFSv4.Afterwards, the customer found that the directory owner was changed from root to nobody.In this scenario, which statement is true?

The export policy is not configured properly.

The customer did not configure name services on the SVM.

The clients must be restarted to start using NFSv4.

The export policy is not configured properly.

The ID mapping domains do not match between the client and server.

You have a NetApp ONTAP cluster consisting of four NetApp FAS8200 controllers with two NetApp CN1610 cluster switches running ONIAP 9.8 software. You are receiving several alert messages stating that the cluster network has degraded. After troubleshooting, you determine that the errors are being generated from Node 2, interface e0b.In this scenario, what should you do first to solve this problem?

Replace the motherboard on Node 2.

Replace the Twinax cable between Node 2, Interface e0b. and the NetApp CN1610 switch.

Replace the motherboard on Node 2.

Replace both NetApp CN1610 switches.

Replace the NetApp CN1610 switch that connects to Node 2, interface e0b.

You have a customer complaining of long build times from their NetApp ONTAP-based datastores.They provided you packet traces from the controller and client. Analysis of these traces shows an average service response time of 1 ms. QoS output confirms the same. The client traces are reporting an average of 15 ms in the same time period.In this situation, what would be your next step?

The client that reports high latency should be investigated.

The cluster is responding slowly and requires further investigation using performance archives.

The client that reports high latency should be investigated.

The cluster interconnects should be investigated.

A sync core should be triggered.

Your customer wants to access a LUN on a FAS 8300 system from a VMware ESXi server through the FC protocol. They already created a new SVM, volume. LUN, and igroup for this purpose. The customer reports that the server's FC HBA port Is online, but the LUN does not show up. Referring to the exhibit, what is the reason for this problem?

The LUN Is not mapped to the correct SCSI ID.

The FC service has not been configured on the SVM.

The zoning on the FC switches Is Incorrect.

The LUN Is not mapped to the correct SCSI ID.

The esxserver igroup contains incorrect IQNs.

You recently discovered the error message shown below in your ONTAP logs. What should be your first action to correct this Issue?

Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol volume.

Determine the root cause behind the inconsistency before attempting any recovery procedure.

Use the storage takeover command on the storage controller that contains my_data_vol.

Use the wafliron command against my_data_vol to solve the inconsistency on the volume.

When an administrator tries to create a share for an existing volume named voll, the process fails with an error. Referring to the exhibit, what Is the reason for the error?

The volume has not been mounted.

The volume must have a type of DP.

The volume has not been mounted.

The CIFS service is not authenticating properly with the domain controller.

The CIFS service is not in workgroup mode.

The motherboard of Node-01 is being replaced. To perform this task, a takeover was Initiated from Node-02. Node-02 panics showing the string below.PANIC; Permanent errors on all HA mailbox disks (while marshalling header) in SKprocess fnmbx_instanceWorker on release 9.5P8 (C) What has happened in this situation?

While in maintenance mode, the fcadmin device_map command was executed.

While in maintenance mode, the sldiag device show command was executed.

While in maintenance mode, the fcadmin device_map command was executed.

While in maintenance mode, the HA_config show command was executed.

While in maintenance mode, the mailbox destroy local command was executed.

You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive the message shown below.Credential authentication failed for x.x.x.x with: HostConnectionFailed In this scenario, how would you correct this problem?

Change the IP address of the ONTAP Select Deploy VM.

Change the gateway address of the ONTAP Select Deploy VM.

Change the IP address of the vCenter server.

You created a new NetApp ONTAP FlexGroup volume spanning six nodes and 12 aggregates with a total size of 4 TB. You added millions of files to the FlexGroup volume with a flat directory structure totaling 2 TB, and you receive an out of apace error message on your host.What would cause this error?

The inode limit is exceeded in the ONTAP software.

The maximum number of volume constituents has been reached in the ONTAP software.

All constituent volumes are full.

The inode limit is exceeded in the ONTAP software.

The maxdirsize Is exceeded in the ONTAP software.

Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?

Enter the metrocluster switchback command on Site A.

Enter the metroclustor switchback command on Site B.

Enter the metrocluster switchback command on Site A.

Enter the storage failover giveback command on Site B.

Enter the storage failover giveback command on Site A.

Your customer mentions that they have accidentally destroyed both root aggregates in their twonode cluster.In this scenario, what are two actions that must be performed? (Choose two.)

Rejoin the second node to the re-created cluster.

Install ONTAP from a USB device.

Rejoin the second node to the re-created cluster.

Re-create the cluster from the local backup.

Install ONTAP from a USB device.

Re-create the cluster from the remote backup.

You have recently discovered that NetApp ONTAP Cloud Manager is not sending AutoSupport messages to NetApp.In this scenario, what would solve this Issue?

Verify that your data LIFs allow traffic to mysupport .netapp.com on port 443.

Verify that your AWS credentials are correctly added to Cloud Manager.

Verify that your NetApp Support site credentials are correctly added to Cloud Manager.

Verify that your data LIFs allow traffic to mysupport .netapp.com on port 443.

Verify that the inbound and outbound rules allow AutoSupport on port 80.

Your customer calls you because one application is not able to access a NetApp ONTAP S3 bucket.While reviewing the EMS log on the cluster, you see the following message: The same credentials work in another application.In this scenario, what would cause this problem?

The application is trying to log in as an anonymous user.

The application is using v2 signatures.

The application is using v4 signatures.

The application is trying to access using the HTTP protocol.

You Just used the CLI to create a NetApp ONTAP FlexGroup Volume on a NetApp Cloud Volumes ONTAP instance. After creation, you notice odd behavior in NetApp Cloud Manager.In this scenario, what Is the reason for this behavior?

Cloud Manager must be used to provision the FlexGroup volume.

Cloud Volumes ONTAP does not support FlexGroup volumes.

The Capacity Management Mode within Cloud Manager should be set to Manual.

The Capacity Management Mode within Cloud Manager should be set to Automatic.

Cloud Manager must be used to provision the FlexGroup volume.

You have a 2-node NetApp FAS2750 switchless cluster with twenty-four 1.8 TB disks that is experiencing performance issues. Upon investigation, you discover several type B consistency points. Referring to the exhibit, which corrective action would address these consistency points?

Add an additional shelf of twenty-four 1.8 TB disks.

Convert the 2-node switchless cluster to a 2-node switched cluster.

Add an additional shelf of twenty-four 1.8 TB disks.

Replace the twenty-four 1.8 TB disks with twelve 4 TB disks.

A customer's storage administrator Informs you about the deactivated Automatic Switchover (AUSO) feature on their MetroCluster IP environment.What Information would you tell your customer in this scenario?

The AUSO feature cannot be activated due to a non-mirrored aggregate.

The AUSO feature is not available in Metrocluster IP installations by design.

A faulty link automatically deactivated the AUSO feature.

This is a configuration failure, you can activate that feature for the customer.

You have a new VMware vSphere cluster with ESXI 7.0U2 hosts. The hosts are connected to a 4-node AFF A400 NetApp ONTAP 9.8 cluster with FC LUNs. You have a requirement to identify and follow I/Os from each VM on the shared FC LUN-backed datastores for troubleshooting purposes.In this scenario, which VMware feature Is supported by ONTAP software to accomplish this task?

vSphere Cluster Services (vCLS)

After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for wafl.dir.size.max logged for the volume of the SVM to which the share points.In this scenario, which action should you take to solve this issue?

Increase the maximum number of files for the volume.

Delete unneeded files from the directory.

Move the volume to a different aggregate.

Increase the maximum number of files for the volume.

Increase the maximum directory size for the volume.

After a normal power down of both nodes for building maintenance, Node01 of a 2-node cluster cannot be powered back up; however, all disk shelves are powered.Which action should be performed to bring the cluster online and allow Node02 to serve data?

Recreate the cluster with the system configuration recovery cluster recreate -from node command.

Reboot the node With the system node reboot -node Node02 -bypass-optimization true command.

Perform a takeover with the storage failover takeover -ofnode Node01 -option force command.

Reinitialize the cluster with option 4a from the boot menu.

A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message in the SP log.Which FIFO message Is useful for Investigating this Issue?

before Reset BBSP:C=00 L=00 FIFO:

before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 AB . BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11

before Reset BBSP:C=00 L=00 FIFO:

ONTAP Shutdown BBSP:C=00 L=2F FIFO:

An administrator receives the following error message: What are two causes for this error? (Choose two.)

There Is excessive SSD load causing the wear leveling to become unbalanced.

There is excessive SATA HDD load.

There Is excessive SSD load causing the wear leveling to become unbalanced.

There is excessive SATA HDD load.

An SSD disk is performing garbage collection to create a dense data layout.

After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is accessed indirectly. The system node run -node -command netstat command shows retransmits and packet drops on the LIFs.The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP 9.8 software.In this scenario, what is causing this problem?

The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.

AFF A300 and AFF A700 node mixing Is not supported in ONTAP 9.8 software.

The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.

There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supported version.

A 2-node cluster hosts only NAS data UFs. All nodes lose access to the cluster network. Referring to the exhibit, which statement is correct?

All nodes in the cluster reset and NAS data UFs are not accessible after reboot.

Both nodes race to takeover the other, one node will takeover the other node.

No takeover event will occur and NAS data UFs will not be accessible.

All nodes in the cluster reset and NAS data UFs are not accessible after reboot.

NAS data UFs are accessible on only the node that has Epsilon.

You receive the "Unable to connect to the management gateway server" error when trying to connect to a node management IP.In this situation, how do you determine whether core dumps are generated for the mgwd user space process?

Log in to the service processor and collect the core dumps from the service processor.

Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.

Log in to the service processor and collect the core dumps from the service processor.

Log in to the clustershell using the node console and collect the core dumps from the clustershell.

Log in to the systemshell and collect core dumps from the systemshell.

Network Appliance NS0-593 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type consistency points (CPs) found occurring on the loot aggregate.

In this scenario, how will performance of the client operations on the data aggregates be affected?

During B2B processing, clients will be unable to write data.

Data aggregates will not be affected by B2B processing on another aggregate.

During B2B processing, all I/O to the node is stopped.

During B2B processing, clients will be unable to read data.

Comment (0)

Network Appliance NS0-593 Practice Test 1

Question

Network Appliance NS0-593 Practice Tests

Practice Tests