A customer with an FC MetroCluster configuration that is running NetApp ONTAP 9.8 software experienced a site outage and wants to know why the MetroClusler configuration did not switch over to the other site.What are two reasons for this problem? (Choose two.)

There was a failed PSU in the switchover site.

The site had unmirrored aggregates.

There was a failed PSU in the switchover site.

The ISLs were down between the sites.

The site had unmirrored aggregates.

An ISL link was not operating at 16Gbps.

You ate connecting a Windows Server 2019 host to ISCSI LUNs on a 4-node AFF A250 cluster running NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log has the message shown below.ISCSI: network interface identifier disabled for use; incoming connection discarded In this scenario, what is the cause of this connection issue?

The WWPN was not added to the initiator group.

iSNS is not enabled on the storage virtual machine.

The WWPN was not added to the initiator group.

The iSCSI service is not enabled on the interface.

CHAP is not configured correctly for the specified initiator.

A user mentions that their home drive, that Is an export within a volume, is no longer allowing them to save files. The drive reports that it Is full, even though It shows that minimal data is written to it.Which statement would explain this behavior?

Other files within the volume are also owned by the user, exceeding the user quota.

The mount is stale and uses a cached version of the volume.

Other users wrote to this user's home drive.

Other files within the volume are also owned by the user, exceeding the user quota.

The client system needs to remount the export to show the proper space.

You are optimizing your Cloud Volumes ONTAP. For interoperability and consolidation purposes, you need to know the storage limits.In this scenario, which source should be reviewed?

NetApp Cloud Volumes ONTAP Release Notes

Interoperability Matrix Tool (IMT)

You receive the panic message shown in the exhibit. In this scenario, which component should you troubleshoot first?

the MetroCluster FC-Vl card in slot 6

You are trying to deploy a Connector in the AWS cloud from NetApp Cloud Manager. The deployment fails and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS access key and the AWS secret key.In this scenario, what Is the reason that the deployment failed?

The user lacks the permission to deploy within Cloud Manager.

No AWS Marketplace subscription is associated with Cloud Manager.

The required Identity and Access Management (IAM) policies were not Installed.

The user lacks the permission to deploy within Cloud Manager.

The Connector can be deployed only in AWS GovCloud (US).

Your customer added a new DS4246 shelf to their FAS2750 single-node system and created a new aggregate on the new shelf. Two weeks later, they log into Active IQ and discover the Medium Impact error shown below. Shelves with both connections via the same SAS path detected Referring to the exhibit, which statement is correct?

This situation is normal for a FA57750 single-node system.

In a FAS2750 system, the internal shelf is only seen on one path, and the external shelves are seen on two paths.

The cables are cabled Incorrectly on the SAS stack.

This situation is normal for a FA57750 single-node system.

Active IQ Is not aware of the shelf configuration for a single-node system.

You notice poor performance on your FlexGroup and execute the system node run -node * flexgroup show command for more Information. You notice the "Urge" column has non-zero values.In this scenario, which statement is true?

The aggregate is completely full.

The constituent volumes are out of Inodes.

The constituent volumes are completely full.

After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that ports 0e and 0f are unable to connect to the fabric. The ports report "offline".What would you examine first to troubleshoot the issue?

storage port show command output

vserver fcp wwpn-alias show command output

system node hardware unified-connect show command output

storage port show command output

vserver fcp interface show command output

A customer reports that some of their client computers are unable to access a FlexGroup over CIFS.This problem involves only their older Windows XP clients and some printers and scanners.In this scenario, which statement Is correct?

FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not support.

FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.

FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not support.

These systems use the SMQI protocol which Is an unsupported feature in FlexGroup

These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.

Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system.In this scenario, what Is the cause of this problem?

Snapshot copies were manually removed from the destination after the resync.

Newer Snapshot copies than the common snapshot that was chosen for resync were removed automatically at the destination.

The autodelete option removed Snapshot copies before the resync.

Snapshot copies were manually removed from the destination after the resync.

NetApp ON TAP System Manager removed these snapshot copies due to a snapshot schedule.

A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G Ethernet card in slot 4 for this purpose. The link comes up fine on node 2, but it will not come up on node 1. You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit. What is the cause of the customer's problem?

The ports are configured for 4x10Gbit instead of 40Gbit.

The cable is plugged in upside down.

The ports are configured for 4x10Gbit instead of 40Gbit.

The port has an incorrect SFP inserted.

A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume. When opening the file later from a Windows system, it was not the file that they wanted.The file that they wanted was named TEST~1.TXT.Which statement explains this behavior?

A Snapshot copy preserved two versions of the file.

UNIX name mapping updated the filename.

A Snapshot copy preserved two versions of the file.

Windows Volume Shadow Copy Service stored an older version of the file.

Case Insensitivity of SMB clients caused the file to be displayed with a different name.

Your customer is running a NetApp AFF A800 system with NetApp ONTAP 9.8 software and states that their NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an identification of "1.SHFHUXXXXXXXXXX." What is the cause of the reported Issue?

A new shelf was added to the controller.

The shelf has been power cycled.

A new shelf was added to the controller.

The shelf had a disk replaced too quickly.

The shelf was cabled Incorrectly.

A customer reports that while Installing Windows updates on their external Vscan servers, clients could not access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The customer wants to prevent this issue from happening during the next patch window.In this scenario, what are two ways to accomplish this task? (Choose two.)

Enable the -scan-mandatory flag in the Vscan policy.

Modify the CIFS shares to be continuously available (CA) shares.

Enable the -scan-mandatory flag in the Vscan policy.

Update the Vscan servers one at a time.

Modify the CIFS shares to be continuously available (CA) shares.

Disable the -scan-mandatory flag in the Vscan policy.

Network Appliance NS0-593 Practice Test 2 - Free Online Exam Prep & Questions

You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet trace.

In this scenario, after you generate the packet trace, where do you find the trace file?

Become a Premium Member for full access

Unlock Premium Member

Network Appliance NS0-593 Practice Test 2

Question

Network Appliance NS0-593 Practice Tests

Practice Tests