ExamGecko
Search Search Login
Home Home / Citrix / 1Y0-241
Ask QuestionAsk Question

Citrix 1Y0-241 Practice Test - Questions Answers, Page 2

Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command: > show csvserver CSV CSV (10.1.100.100:443) – HTTPS Type: CONTENT State: UP Last state change was at Mon Jun 29 15:20:43 2020 Time since last state change: 1 day, 06:47:58 610 Client Idle Timeout: 180 sec Down state flush: ENABLED Disable Primary vServer On Down: DISABLED Appflow logging: ENABLED Port Rewrite: DISABLED State Update: DISABLED Default: Content Precedence: URL vServer IP and Port insertion: OFF Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance Backup: vServer–LB–2 Listen Policy: NONE IcmpResponse: PASSIVE RHIstate: PASSIVE Traffic Domain: 0 Based on this output, where will the subsequent request be redirected?
Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold. How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually – accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed. To achieve these requirements, which parameter can the administrator configure while disabling the service?
Where do the monitor probes originate by default, after creating and correctly configuring a custom user monitor?
In a global server load balancing (GSLB) active-active environment, the connection proxy is used as the site persistence method. What is used to source the traffic when the connection is proxied?
How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to1.0 in every request?
Scenario: To receive data alerts for failures, a Citrix Administrator is configuring SNMP on the Citrix ADC. The administrator is confident that the manager, alarms and SNMP traps are configured correctly. The following week, there is a Citrix ADC-related outage and the administrator does NOT receive any alerts. What could be the reason for this alert failure?
Scenario: A load-balancing vServer is configured to utilize the least bandwidth load-balancing method. A service attached to this vServer is brought into the effective state during production hours. During the startup of a vServer, which load-balancing method is used by default?
Scenario: A Citrix Administrator manages a Citrix SDX appliance with several instances configured. The administrator needs to enable Layer 2 mode on two instances. When using a shared network interface, what must the administrator do to ensure that traffic flows correctly?

Question 11

Report
Export
Collapse

Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.

Which feature should the administrator configure to accomplish this?

A.
DNS Preferred Location
A.
DNS Preferred Location
Answers
B.
DNS Record
B.
DNS Record
Answers
C.
DNS View
C.
DNS View
Answers
D.
DNS Proxy
D.
DNS Proxy
Answers
Suggested answer: C

Explanation:

Reference: https://support.citrix.com/article/CTX130163

asked 16/09/2024
Jeff Benson
44 questions

Question 12

Report
Export
Collapse

Scenario: The Citrix Administrator of a Linux environment needs to load balance the web servers.

Due to budget constraints, the administrator is NOT able to implement a full-scale solution.

What can the administrator purchase and install to load balance the webservers?

A.
Citrix ADC MPX
A.
Citrix ADC MPX
Answers
B.
Citrix ADC VPX
B.
Citrix ADC VPX
Answers
C.
Citrix ADC SDX
C.
Citrix ADC SDX
Answers
D.
Citrix ADC CPX
D.
Citrix ADC CPX
Answers
Suggested answer: D

Explanation:

Reference: https://www.citrix.com.br/products/citrix-adc/cpx-express.html

asked 16/09/2024
Serhan Azdiken
42 questions

Question 13

Report
Export
Collapse

What is the effect of the “set cs vServer-CS-1 –redirectURL http://www.newdomain.com/mysite/”command?

A.
If the vServer-CS-1 encounters a high connection rate, then users will be redirected to http://www.newdomain.com/mysite/.
A.
If the vServer-CS-1 encounters a high connection rate, then users will be redirected to http://www.newdomain.com/mysite/.
Answers
B.
If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain.com/mysite/.
B.
If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain.com/mysite/.
Answers
C.
All the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
C.
All the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
Answers
D.
All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
D.
All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
Answers
Suggested answer: B

Explanation:

https://support.citrix.com/article/CTX108946/how-to-configure-redirect-url-on-adc-virtual-serverwhen-virtual-server-is-not-available

asked 16/09/2024
haythem BRIGUI
31 questions

Question 14

Report
Export
Collapse

Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard Platform license and remote employees in the environment. The administrator wants to increase access by 3,000 users through the Citrix Gateway using VPN access.

Which license should the administrator recommend purchasing?

A.
Citrix ADC Burst Pack
A.
Citrix ADC Burst Pack
Answers
B.
Citrix Gateway Express
B.
Citrix Gateway Express
Answers
C.
Citrix Gateway Universal
C.
Citrix Gateway Universal
Answers
D.
Citrix ADC Upgrade
D.
Citrix ADC Upgrade
Answers
Suggested answer: C

Explanation:

Reference: https://docs.citrix.com/en-us/citrix-gateway/current-release/citrix-gatewaylicensing.html

asked 16/09/2024
Matthew Montgomery
32 questions

Question 15

Report
Export
Collapse

Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.

Why is the administrator unable to see all 100 virtual servers?

A.
The nsroot passwords are NOT the same across all the Citrix ADCs.
A.
The nsroot passwords are NOT the same across all the Citrix ADCs.
Answers
B.
Citrix ADM is using a free license.
B.
Citrix ADM is using a free license.
Answers
C.
Additional Citrix ADM systems need to be deployed to see all virtual servers.
C.
Additional Citrix ADM systems need to be deployed to see all virtual servers.
Answers
D.
The Citrix ADC and Citrix ADM firmware versions are NOT the same.
D.
The Citrix ADC and Citrix ADM firmware versions are NOT the same.
Answers
Suggested answer: B

Explanation:

Free (default) License limits the number of managable objects.

asked 16/09/2024
Ricardo Chapa
40 questions

Question 16

Report
Export
Collapse

Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.

The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.

Why has the Citrix ADC lost the newly added configurations?

A.
The junior administrator made the changes and did NOT force a failover to save the configuration.
A.
The junior administrator made the changes and did NOT force a failover to save the configuration.
Answers
B.
The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
B.
The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
Answers
C.
Both Citrix ADCs in the HA pair restarted overnight.
C.
Both Citrix ADCs in the HA pair restarted overnight.
Answers
D.
The Citrix ADC appliances have different firmware versions.
D.
The Citrix ADC appliances have different firmware versions.
Answers
Suggested answer: B

Explanation:

"You are connected to the secondary node..." when first login to the NSIP and after saving the configuration

asked 16/09/2024
Anand R
37 questions

Question 17

Report
Export
Collapse

Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.

The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.

Which does the administrator need to configure to meet this requirement?

A.
set transform action “host change” –priority 10 –reqUrlFrom “https://vpn.citrix.com/*” –reqUrlInto “https://server1.citrix.com/*” –resUrlFrom “https://server1.citrix.com/*” –resUrlInto“https://vpn.citrix.com/*”
A.
set transform action “host change” –priority 10 –reqUrlFrom “https://vpn.citrix.com/*” –reqUrlInto “https://server1.citrix.com/*” –resUrlFrom “https://server1.citrix.com/*” –resUrlInto“https://vpn.citrix.com/*”
Answers
B.
set transform action “host change” –priority 10 –reqUrlFrom “https://server1.citrix.com/*” –reqUrlInto “https://vpn.citrix.com/*” –resUrlFrom “https://server1.citrix.com/*” –resUrlInto “https://vpn.citrix.com/*”
B.
set transform action “host change” –priority 10 –reqUrlFrom “https://server1.citrix.com/*” –reqUrlInto “https://vpn.citrix.com/*” –resUrlFrom “https://server1.citrix.com/*” –resUrlInto “https://vpn.citrix.com/*”
Answers
C.
set transform action “host change” –priority 10 –reqUrlFrom “https://server1.citrix.com/*” –reqUrlInto “https://vpn.citrix.com/*” –resUrlFrom “https://vpn.citrix.com/*” –resUrlInto “https://server1.citrix.com/*”
C.
set transform action “host change” –priority 10 –reqUrlFrom “https://server1.citrix.com/*” –reqUrlInto “https://vpn.citrix.com/*” –resUrlFrom “https://vpn.citrix.com/*” –resUrlInto “https://server1.citrix.com/*”
Answers
D.
set transform action “host change” –priority 10 –reqUrlFrom “https://vpn.citrix.com/*” –reqUrlInto “https://server1.citrix.com/*” –resUrlFrom “https://vpn.citrix.com/*” –resUrlInto“https://server1.citrix.com/*”
D.
set transform action “host change” –priority 10 –reqUrlFrom “https://vpn.citrix.com/*” –reqUrlInto “https://server1.citrix.com/*” –resUrlFrom “https://vpn.citrix.com/*” –resUrlInto“https://server1.citrix.com/*”
Answers
Suggested answer: A
asked 16/09/2024
Louis Reeves
44 questions

Question 18

Report
Export
Collapse

Which step can a Citrix Administrator take to use default compression policies?

A.
Select the compression algorithm (gzip/deflate/identity).
A.
Select the compression algorithm (gzip/deflate/identity).
Answers
B.
Disable the Citrix ADC compression feature at a global level.
B.
Disable the Citrix ADC compression feature at a global level.
Answers
C.
Enable compression on the associated bound services.
C.
Enable compression on the associated bound services.
Answers
D.
Bind the default compression policies to the vServer.
D.
Bind the default compression policies to the vServer.
Answers
Suggested answer: C

Explanation:

To put a compression policy into effect, you must bind it either globally, so that it applies to all traffic that flows through the Citrix ADC, or to a specific virtual server, so that the policy applies only to requests whose destination is the VIP address of that virtual server.

By default, compression is disabled on the Citrix ADC. You must enable the feature before configuring it. You can enable it globally so that it applies to all HTTP and SSL services, or you can enable it just for specific services.

https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advancedsettings/enable-compression-on-service.htm

asked 16/09/2024
samresh mahata
36 questions

Question 19

Report
Export
Collapse

Scenario:

POLICY 1: add rewrite action ACT_1 corrupt_http_header Accept-Encoding add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1 POLICY 2: add rewrite action ACT_2 insert_http_header Accept-Encoding “\”identity\”” add rewrite policy POL_2 “HTTP.REQ.IS_VALID “ ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?

A.
bind lb vServer lb_vsrv –policyName POL_1 –priority 110 –gotoPriorityExpression NEXT –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST
A.
bind lb vServer lb_vsrv –policyName POL_1 –priority 110 –gotoPriorityExpression NEXT –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST
Answers
B.
bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression NEXT –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST
B.
bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression NEXT –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST
Answers
C.
bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression END –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 80 –gotoPriorityExpression NEXT –type REQUEST
C.
bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression END –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 80 –gotoPriorityExpression NEXT –type REQUEST
Answers
D.
bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –type REQUEST
D.
bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –type REQUEST
Answers
Suggested answer: B

Explanation:

- Pol1 has a prio of 90 so it's evaluated first

-gotoPrioExpression NEXT means that it will evaluate next item in the policy list

- Pol2 has a prio of 100, so it"s avaluated after Pol1

asked 16/09/2024
Gregory Pollack
32 questions

Question 20

Report
Export
Collapse

Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible.

There is no Citrix ADC backup.

What does the administrator need to do to recover the configuration quickly?

A.
Restart the Citrix ADC.
A.
Restart the Citrix ADC.
Answers
B.
Restore from the revision history.
B.
Restore from the revision history.
Answers
C.
Run saved versus running configuration.
C.
Run saved versus running configuration.
Answers
D.
Run highly availability (HA) file synchronization.
D.
Run highly availability (HA) file synchronization.
Answers
Suggested answer: B
asked 16/09/2024
Mariusz Lewandowski
38 questions
Total 112 questions
Go to page: of 12
ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy policy
Terms
Disclaimer
Refund policy
Copyright
Twitter X
Facebook
Medium