How should a BIG-IP Administrator control the amount of traffic that a newly enabled pool member receives?

set the Priority Group Activation

A BIG-IP Administrator contacts F5 Support, which identifies a suspected hardware failure. Which information should the BIG-IP Administrator provide to F5 Support?

Qkview, UCS archive, core files

Qkview, part numbers for failed components

Qkview, packet capture, UCS archive

The BIG-IP Administrator needs to ensure the correct health monitor is being used lor a new HTTP pool named P_example.Where should the BIG-IP Administrator validate these settings in the Configuration Utility?

Local Traffic > Pools > P_ example

Local Traffic > Nodes > Default Monitor

Local Traffic > Profiles > Services > HTTP > http

Local Traffic > Monitors > http

Local Traffic > Pools > P_ example

A BIG-IP Administrator needs to check the memory utilization on a BIG-IP system. Which two methods can the UIG IP Administrator use? (Choose two.)

Run the tmsh show/sys memory command

Go to Statistics > Module Statistics > Memory in the configuration utility

Run the tmsh show/sys memory command

Run the tmsh show/sys traffic command

Go to Statistics > Module Statistics > Traffic Summary in the configuration utility

Go to Statistics > Module Statistics > Memory in the configuration utility

Go to System > Disk Management in the configuration utility

A BIG-IP Administrator wants to add the ASM Module to an HA pair of BIG-IP devices. The BIG-IP Administrator has already installed a new Add-On License on both devices in the HA pair. What should the BIG-IP Administrator do next to use the module?

Provision the new module on both BIG-IP device's

Synchronize both BIG-IP devices

Reactivate the Licenses on both BIG IP devices

A BIG-IP Administrator notices that one of the servers that runs an application is NOT receiving any traffic. The BIG-IP Administrator examines the configuration status of the application and observes the displayed monitor configuration and affected Pool Member status. What is the possible cause of this issue?

The Node Health Monitor is NOT responding.

The application is NOT responding with the expected Receive String.

HTTP 1.1 is NOT appropriate for monitoring purposes.

The BIG-IP device is NOT able to reach the Pool.

DNS queries from two internal DNS servers are being load balanced to external DNS Servers via a VirtualServer on a BIG-P device. The DNS queries originate from 192.168.101.100 and 192.168.101.200 and target 192.168.21.50All DNS queries destined for the external DNS Servers failWhich property change should the BIG-IP Administrator make in the Virtual Server to resolve this issue?

Protocol Profile (Client) to DNS-OPTIMZED

Source Address to 192.168.101.0/24

A 816-IP Administrator recently deployed an application Users are experiencing slow performance with the application on some remote networks.Which two modifications can the BIG-IP Administrator make to address this issue? (Choose two)

Apply f5-tcp-wan profile to the Virtual Server

Apply f5-tcp-lan profile to the Virtual Server

Apply dest addr profile to the Virtual Server

Apply f5-tcp-wan profile to the Virtual Server

Apply f5-tcp-lan profile to the Virtual Server

Apply source_addr profile to the Virtual Server

Apply fasti_4 profile to the Virtual Server

Refer to the exhibit. A BIG-IP Administrator needs to fall over the active device. The administrator logs into the ConfigurationUnity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed outWhat is causing this issue?

The BIG-IP Administrator is on the Standby Device

The BIG-IP Administrator is NOT logged into command line to tail over

The BIG-IP Administrator is on the Standby Device

The BIG-IP Administrator is logged in as root

The BIG-IP Administrator is logged in as administrator

A BIG-IP Administrator is working with a BIG-IP device and discovers that one of the Interfaces on aTrunk is DOWN.What is the reason for this Interface status?

The switch is NOT connected to the Interface

There is NO transceiver installed on the Interface

There is NO default route configured for this trunk

The media speed of the interface has NOT been set

A BIG-IP Administrator creates a new VLAN on BIG-IP Cluster Member A and attaches an Interface to it. Although the Auto Config Sync is in place, the new VLAN does NOT show up on Cluster Member B. What should the BIG-IP Administrator do to ensure the new VLAN is configured on each Cluster Member?

Configure the new VLAN manually on Cluster Member B.

Reset the Device Trust of the BIG-IP Cluster on either Cluster Member.

Configure a Default Route for the new VLAN on Cluster Member A.

Enable the Interface that is attached to the new VLAN on Cluster Member A.

A BIG-IP Administrator must determine if a Virtual Address is configured to fail over to the standby member of a device group in which area of the Configuration Utility can this be confirmed?

Local Traffic > Virtual Servers

Device Management > Traffic Groups

Local Traffic > Virtual Servers

A development team needs to apply a software fix and troubleshoot one of its servers. The BIG-IP Administrator needs to immediately remove all connections from the BIG-IP system to the back end server. The BIG-IP Administrator checks the Virtual Server configuration and finds that a persistence profile is assigned to it. What should the 8IG-IP Administrator do to meet this requirement?

Set the pool member to a Forced Offline state and manually delete easting connections through the command line.

Set the pool member to a Forced Offline state.

Set the pool member to a Disabled state.

Set the pool member to a Disabled state and manually delete existing connections through the command line.

The owner of a web application asks the 8IG-IP Administrator to change the port that the BIG-IP device sends traffic to. This change must be made for each member in the server pool named app_pool for their Virtual Server named app_vs. In which area of the BIG-IP Configuration Utility should the BIG-P Administrator make this change?

Local Traffic > Virtual Servers

A BIG-IP Administrator assigns the default http health monitor to a pool that has three members listening on port 80 When the administrator connects to each pool member via the CURL utility, two of the members respond with a status of 404 Not Found while the third responds with 200 OK. What will the pool show for member availability?

Two members offline and one member online.

Two members online and one member offline.

A BIG-IP Administrator needs to apply a health monitor for a pool of database servers named DB_Pool that uses TCP port 1521.Where should the BIG-IP Administrator apply this monitor?

Local Traffic > Pools > DB Pool > Properties

Local Traffic > Profiles Protocol > TCP

Local Traffic > Nodes > Default Monitor

Local Traffic > Pools > De Pool > Members

Local Traffic > Pools > DB Pool > Properties

A BIG-IP Administrator finds the following log entry after a report of user issues connecting to a virtual server:01010201: 2: Inet port exhaustion on 10.70.110.112 to 192.28.123.250:80 (proto 6)How should the BIG-IP Administrator modify the SNAT pool that is associated with the virtual server?

Add an address to the SNAT pool.

Remove the SNAT pool and apply SNAT Automap.

Remove an IP address from the SNAT pool.

Add an address to the SNAT pool.

Increase the timeout of the SNAT addresses.

A BIG-IP Administrator configures remote authentication and needs to make sure that users can still login even when the remote authentication server is unavailable.Which action should the BIG-IP Administrators in the remote authentication configuration to meet this requirement?

Enable the Fallback to Local option

Configure a second remote user directory

Refer to the exhibit. During a planned upgrade lo a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby Reverting the flower resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next for over event?

The Tag voice on the Standby device

The interface on the Active device to 1.1

The Tag value on the Active device

The Interface on the Standby device to 1.1

A 8IG-IP device is replaced with an RMA device. The BIG-IP Administrator renews the license and tries to restore the configuration from a previously generated UCS archive on the RMA device. The device configuration is NOT fully loading. What is causing the configuration load to fail?

The Device Group is NOT configured for Full Sync.

The US does NOT contain the full config

To increase available bandwidth of an existing Trunk, the BIG-IP Administrator is adding additional interfaces.Which command should the BIG-IP Administrator run from within bosh shell?

tmsh modify /net trunk trunk_A interfaces add {1.3.1.4}

tmsh create /net trunk trunk_A interfaces add {1.3.1.4}

tmsh create/sys trunk trunk_A interfaces add {1.3.1.4}

tmsh modify/sys trunk trunk^A interfaces add {1.3.1.4}

tmsh modify /net trunk trunk_A interfaces add {1.3.1.4}

Refer to the exhibit. A BIG-IP Administrator configures a Virtual Server to handle HTTPS traffic. Users report that the application is NOT working.Which actional configuration is regard to resolve this issue?

Configure Protocol Profile (Server)

A BIG-IP Administrator needs to have a BIG-IP linked to two upstream switches for resilience of the external network. The network engineer who is going to configure the switch instructs the BIG-IP Administrator to configure interface binding with LACP. Which configuration should the administrator use?

A Trunk containing an interface connected to each switch.

A virtual server with an LACP profile and the switches' management IPs as pool members.

A virtual server with an LACP profile and the interfaces connected to the switches as pool members.

A Trunk listing the allowed VLAN IDs and MAC addresses configured on the switches.

A Trunk containing an interface connected to each switch.

A BIG-IP Administrator finds the following log entry:tnm tmm[7141]: 011e0002:4: sweeperjjpdate: aggressive mode activated.Which action should the BIG-IP Administrator to mitigate this memory issue?

Configure the serve to use Connection Mirroring

Configure the redundant par to be active-active

Decrease the TCP profile ide Timeout value

increase the TCP profile ide Timeout value

Configure the serve to use Connection Mirroring

A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to remediate these vulnerabilities.Which action should the BIG-IP Administrator recommend?

Generate a view and upload to Heath

Verify the TMOS version and review the release notes

Create a UCS archive and upload to Health

Create a UCS archive and open an F5 Support request

Generate a view and upload to Heath

A BIG-IP Administrator needs to apply a license to the BIG-IP system to increase the user count from the base license.Which steps should the BIG-IP Administrator?

System License > Re-activate> Add-On Registration> Edit

System > License > Re-activate > Base Registration> Edit

Device Management > Devices > Select BIG-IP System > Update

System > Configuration >Device > General

A BIG-IP device is configured with both an internal external and two Corporate VLANs. The virtual server has SNAT enabled and is set to listen on all VLANs Auto Last Hop is disabled. The Corporate users are on 10.0.0.0./24 and 172.16.0.0/12. The BIG-IP has a Self-IP on the 1.0.0.0.0./24 subnet.Internet users are able to access the virtual server. Only some of the Corporate users are able to connect to the virtual server A BIG-IP Administrator performs a tcpdump on the BIG-IP and verifies that traffic is arriving from users in 10.0.0.0/24.What should the BIG-IP Administrator do to correct this behaviour?

Add a static route for the 172.16.0.0/12 subnet

Disable the server on the internal VLAN

Add a static route for the 172.16.0.0/12 subnet

Change the default route to point to the extra firewall

Modify the default route of the servers to point to the BIG-IP device

F5 201 Practice Test 3 - Free Online Exam Questions 81-120

A BIG-IP Administrator upgrades the BIG-IP LTM to a newer software version. After the administrator reboots into the new volume, the Configuration fails to load. Why is the Configuration failing to load?

Become a Premium Member for full access

Unlock Premium Member

F5 201 Practice Test 3

Question

F5 201 Practice Tests

Practice Tests