Refer to the exhibit. An engineer must configure Cisco IM and Presence server high availability so that the publisher node fails over to the subscriber node if the publisher node becomes unavailable On the Presence Redundancy Group Configuration page the engineer receives this message ‘High availability is not enabled for this cluster " Which two actions must the engineer perform to resolve the issue? (Choose two.)

Add IMPSub as a secondary presence server in the redundancy group

Select Enable High Availability and dick Save.

Add IMPSub as a secondary presence server in the redundancy group

Click Save and restart the Cisco Presence Engine.

Replace iMPPub with IMPSub m the redundancy group.

Add a new presence redundancy group and click Save

Select Enable High Availability and dick Save.

What are two characteristics of Smart Card Authentication for Cisco UC Applications? (Choose two.)

requires a PIN password or passphrase

is supported on all devices and operating systems

uses single-factor authentication

is less secure than form-based authentication

A collaboration engineer is troubleshooting a Cisco Jabber IM and Presence issue Cisco TAC asked the engineer to generate a client-side problem report Which set of actions must the engineer perform to find and download the problem report logs?

Click the Help menu select Report a problem and follow the instructors

Click Settings Help and follow the instructions

Click Settings Help Reports and follow the instructions

Click Admin select Logs and follow the instructions

A collaboration engineer is troubleshooting an issue with Cisco Jabber for Windows clients Users in a new branch location report that 'cannot locate server is displayed when they launch the client When the engineer manually configures the server settings on a client, the dient logs in successfully. TheCisco IM and Presence servers are located across the WAN at the corporate HQ Which action resolves the issue?

Add a _cisco-uds_tcp company com SRV record to the branch DNS server

Reinstall the Jabber clients with UPN_DISCOVERY_ENABLED=false

Add a firewall rule to allow TCP/8443 from the branch to HQ

Add a _collab-edge _Us.company com SRV record to the branch DNS server

Add a _cisco-uds_tcp company com SRV record to the branch DNS server

A collaboration engineer is implementing toll fraud prevention on Cisco Unity Connection. The engineer wants to block calls to 9005551234 for any caller that reaches the Caller System Transfer conversation. Which configuration accomplishes this goal?

900 blocked on the default Transfer Restriction Table

9005551234 blocked the Default System Transfer Restriction

9005551234 blocked the Default Outdial Restriction Table

900 blocked on the default Transfer Restriction Table

900 blocked on the Default Outdial Restriction Table

A collaboration engineer is troubleshooting Cisco IM and Presence high availability. The system is version 10.x. The engineer has confirnd that the server recovery manager service is configured using system defaults. The engineer notices that user sessions have not fallen back to the homed nodes. What is the cause this Issue?

The failed service Of server was offline longer than the Client Re-Login upper Lint setting.

The engineer did not click the Fallback button for the redundancy group

The user accounts were moved to the redundant server,

The failed service Of server was offline longer than the Client Re-Login upper Lint setting.

The failed service or server has not been active for at least 30 minutes.

On a Cisco IM and Presence deployment, chat settings are edited, or one or more aliases are added to a chat node, but the changes are not reflected for users. Which service must be restarted for changes to be reflected?

Cisco XCP Text Conference Manager Service

IM and Presence Manager Service

A collaboration engineer is troubleshooting MWl issues with Cisco Unity Connection and Cisco UCM. Users report that MWl lights do not work when a new message is received. After doing a packet capture, the engineer notices that Unity Connection sends a SIP Notify to Cisco UCM for MWI.Cisco UCM responds with a SIP 503 Service Unavailable message. Which action resolves the issue?

Configure the SIP server list on the Cisco Unity Connection port group to match the Cisco UCM device pool settings on the SIP trunk.

Assign the proper voicemail profile to the directory numbers on Cisco UCM.

Uncheck'Send Message Counts' on the phone system settings on Cisco Unity Connection.

Uncheck'Accept unsolicited notifications' on the SIP trunk security profile.

A company deployed the Cisco Webex App with single sign-on enabled using the internal ldP, but users receive the error 'Single Sign On Failed.Invalid Status code in Resume' when trying to log in through the security assertion markup language SSO. Which action must an administrator taketo resolve the issue?

Configure SSO in Control Hub ADFS.

Configure SSO in Control Hub with Cisco DUO.

Configure SSO in Control Hub with Microsoft Azure.

Configure SSO in Control Hub with Okta.

Configure SSO in Control Hub ADFS.

A user is experiencing video quality issues and wants to verify packet loss, jiter, and codecs in use. Where can the user find this information in the Webex App for Windows during a call?

Settings, Status, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+S

Settings, Health Checker, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+D

Help, Health Checker, and press Diagnostics in the Webex App or Ctrl+Shit+Alt+D

Help, Health Checker, and press Status in the Webex App or Ctrl+Shit+Alt+S

Refer to the exhibit. A company deployed the Cisco Webex calling with Cisco Unified Border Element as a local gateway for PSTN calls and a firewall to restrict and control the HTTP-based traffic that leaves and enters the network. However, Alice in LA cannot dial 82024001 to reach Charlie in NY. Which action must an administrator take to resolve the issue?

Open TCP port 8934 outbound on the firewall.

Open UDP port 5062 outbound on the firewall.

Open TCP port 5062 outbound on the firewall.

Open TCP port 8934 outbound on the firewall.

Open UDP port 8934 outbound on the firewall.

What are two benefits of deploying OAuth in a Cisco UCM environment that uses Cisco Jabber or Cisco Webex for on-premises calling?(Choosetwo.)

It removes the need for Jabber and Webex clients to re-authenticate frequently.

It provides seamless access to resources over the life of the refresh token.

Layers of security are added due to forced user password prompt.

It removes the need for Jabber and Webex clients to re-authenticate frequently.

It provides seamless access to resources over the life of the refresh token.

Token expiration can never take place, which ensures that users stay logged in.

A company is setting up B2B instant messaging capability using a secure client integrated into the on-premises Cisco communication platform. During the setup, the engineer discovers that external Usages from other businesses do not seem to reach the Cisco Expressway for instant messaging, but B2B calling seems to be working Internal chat between clients and chat toward clients is king m home offices using Mobile and Remote Access The engineer verified that the correct ports have been configured on the Cisco ASA, and the firewall rules on the expressway show no cation of any traffic What is the cause of the issue?

The SRV record for XMPP is not configured or is misconfigured.

The XMPP service is not activated on the Cisco Expressway

The Cname record for XMPP is not configured or is misconfigured.

The SRV record for XMPP is not configured or is misconfigured.

The XMPP service is not running under services in Cisco IM and Presence Server

Collaboration engineer is troubleshooting an issue with Cisco Jabber for Windows. Users report that they are prompted to accept or decline an invalid certificate when they attempt to log in to the client, r server certificates have been signed by a public CA. The engineer wants to resolve this issue by importing a CA root certificate to the client into which certificate store must the engineer import the certificate?

Trusted Root Certification Authorities store

Trusted Publishers Certification store

Intermediate Certification Authorities store

Trusted Root Certification Authorities store

An engineer must configure XMPP federation on a Cisco Instant Messaging and Presence Service node, but the XCP XMPP Federation Connection Manager service fails to start. Which action must the engineer take to resolve the issue?

Restart the Cisco XCP Router service

Activate XMPP federation service

Enable TLS m the XMPP Federation settings.

Restart the Cisco XCP Router service

Restart the Cisco IM and Presence service.

An engineer is informed that high availability for a Cisco IM and Presence server fails While the engineer examines the Cisco UCM presence redundancy group in the Ul. they discover that the first .. is in the Idle state, and the second node is in the running in backup mode state Which action must the engineer take to place both nodes back in the normal state?

Click Failover in the Server Action field

Restart the first node of the IM and Presence server

Click Fallback in the Server Action field

Reinstall the first node of the IM and Presence server.

Refer to the exhibit. Refer to the exhibit A collaboration engineer is troubleshooting an issue with MWIs not working for SIP-integrated Cisco Unity Connection users on Cisco UCM Calls to the Cisco Unity Connection work. but MWIs do not light This problem affects all users on the system Which action resolves the issue?

Configure the Message Waiting Numbers on Cisco UCM

Modify the SIP Trunk Security Profile on Cisco UCM.

Increase the Delay Between Requests timer on Cisco Unity Connection

Assign a Calling Search Space to the SIP Trunk on Cisco UCM

Configure the Message Waiting Numbers on Cisco UCM

What is a step when integrating Cisco UACA with Cisco UCM?

create a CTI route point template that will be used by Cisco UACA

create a SIP trunk between Cisco UACA and Cisco UCM

create a CTI port template that will be used by Cisco UACA

create a new end user account to be used by Cisco UACA

create a CTI route point template that will be used by Cisco UACA

Which benefit do administrative applications provide when SAML SSO is configured for Cisco Unified Solutions?

cross-domain and cross-product SSO

seamless synchronization of users

authentication toward one local Cisco Unified server for clients

cross-domain and cross-product SSO

Collaboration engineer is enabling interdomain federation for Cisco IM and Presence The engineer has been asked to enable federation with Office 365 Which service must the engineer enable to meet this requirement?

Cisco XCP XMPP Federation Connection Manager

Cisco XCP Test Conference Manager

Cisco XCP XMPP Federation Connection Manager

Cisco XCP Web Connection Manager

Cisco XCP SIP Federation Connection Manager

Cisco Unity Connection system is integrated with two Cisco UCM clusters cluster A and duster B Voicemail is working perfectly for users on cluster A Users on cluster B report Message Waiting factor (MWI) lights are not working at all. however they can still send/receive messages. Which action resolves the issue?

Select the 'Use Same Port for Enabling and Disabling MWIs' check box under Telephony Integrations > Phone System.

Disable 'Force AJI MWIs Off for This Phone System' under Telephony Integrations > Phone System > Phone System Basics

Check and reseat the RS-232 serial cable connection on the master PIMG/TIMG

Enable 'Message Count Totals' for cluster B users Playback Message Settings

Select the 'Use Same Port for Enabling and Disabling MWIs' check box under Telephony Integrations > Phone System.

An engineer in a company have access to voice calling and voicemail from desktop phones As the company transitions to remote work, users are utilizing the Cisco Jabber client through Mobile and Remote .. to access company phone services. Users cannot access voicemail through the Cisco Jabber client, even though voicemail is functioning in the office on the desk phone. Cisco Jabber works IM and Presence, including calling through Mobile and Remote Access What is the cause of the issue?

Cisco Unity Connection is missing from the internal Cisco UCM clusters.

Cisco Unity Connection is missing from the internal Cisco UCM mobility profiles

Cisco Unity Connection is missing from the internal Expressway-C clusters.

Cisco Unity Connection is missing from the internal Cisco UCM clusters.

Cisco Unity Connection is missing from the Expressway-E clusters for external communication.

Collaboration engineer is troubleshooting an issue with Cisco Jabber for Windows clients Users report that they receive the error message 'cannot find your services automatically. All users on the collaborate network with an on-premises Cisco IM and Presence server report this issue. Which action resolves the issue?

Add _cisco-uds and _cuplogin SRV records to the internal DNS server.

Set the AUTHENTICATOR CLI argument for the Jabber clients

Add _collab-edge SRV records to the external DNS server

Add _cisco-uds and _cuplogin A records to the internal DNS server

Add _cisco-uds and _cuplogin SRV records to the internal DNS server.

Collaboration engineer is troubleshooting a Cisco Jabber for Windows client issue The end user reports that they cannot control their desk phone from the Cisco Jabber client. Which action must the engineer take to verify the service connections of the Cisco Jabber client?

Click Help and dick Show Connection Status

Click Help and dick XML settings

Click XML settings and click Help

Click TFTP settings and click Help

Cisco 300-810 Practice Test 5 - Free Online Exam Questions 161-200

Refer to the exhibit A collaboration engineer is troubleshooting a Cisco Jabber for Windows client issue The end user reports that they cannot control their Cisco 8845 IP Phone from the Cisco Jabber client Which configuration addition to the end user profile resolves the issue?

Cisco 300-810 image Question 161 114854 10102024232813000000

Become a Premium Member for full access

Unlock Premium Member

Cisco 300-810 Practice Test 5

Question

Drag and Drop

Hot Area

Cisco 300-810 Practice Tests

Practice Tests