ExamGecko
Home Home / Cisco / 500-220

Cisco 500-220 Practice Test - Questions Answers, Page 7

Question list
Search
Search

List of questions

Search

The WAN connection of a Cisco Meraki MX security appliance is congested, and the MX appliance is buffering the traffic from LAN ports going to the WAN ports. High, normal, and low priority queue buffers are all full. Which proportion of the normal traffic is forwarded compared to the other queues?

A.

4/10 packets

A.

4/10 packets

Answers
B.

2/7 packets

B.

2/7 packets

Answers
C.

2/10 packets

C.

2/10 packets

Answers
D.

5/15 packets

D.

5/15 packets

Answers
Suggested answer: B

Explanation:

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping

Which enrollment method must be used when containerization is required on BYOD Android devices managed by Systems Manager?

A.

Android Enterprise utilizing a Work Profile

A.

Android Enterprise utilizing a Work Profile

Answers
B.

Systems Manager network ID

B.

Systems Manager network ID

Answers
C.

Android Business utilizing a BYOD Profile

C.

Android Business utilizing a BYOD Profile

Answers
D.

Systems Manager container ID

D.

Systems Manager container ID

Answers
Suggested answer: A

Explanation:

https://documentation.meraki.com/SM/Device_Enrollment/Containerization_with_Systems_Manager

What is out of scope when considering the Best practices for high-density wireless designs?

A.

maximum beamforming

A.

maximum beamforming

Answers
B.

band selection

B.

band selection

Answers
C.

minimum bitrate

C.

minimum bitrate

Answers
D.

number of SSIDs

D.

number of SSIDs

Answers
Suggested answer: A

Explanation:

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/High_Density_Wi-Fi_Deployments

Refer to the exhibit.

Why does the end user complain of poor wireless performance?

A.

Channel 48 utilization is at 84 percent.

A.

Channel 48 utilization is at 84 percent.

Answers
B.

Non-802.11 traffic of 18 percent indicates poor AP placement.

B.

Non-802.11 traffic of 18 percent indicates poor AP placement.

Answers
C.

The client is connected to the secondary radio of the AP instead of the primary radio

C.

The client is connected to the secondary radio of the AP instead of the primary radio

Answers
D.

The client is using a 20 MHz channel width to connect.

D.

The client is using a 20 MHz channel width to connect.

Answers
Suggested answer: A

A Cisco Meraki MX security appliance is trying to route a packet to the destination IP address of 172.18.24.12. Which routes contained in its routing table does it select?

A.

Auto VPN route 172.18.0.0/16

A.

Auto VPN route 172.18.0.0/16

Answers
B.

static route 172.16.0.0/12

B.

static route 172.16.0.0/12

Answers
C.

non-Meraki VPN route 172.18.24.0/24

C.

non-Meraki VPN route 172.18.24.0/24

Answers
D.

directly connected 172.18.16.0/20

D.

directly connected 172.18.16.0/20

Answers
Suggested answer: C

Explanation:

Route Priority

Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:

Directly Connected

Client VPN

Static Routes

AutoVPN Routes

Non-Meraki VPN Peers

BGP learned Routes

NAT*

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior


A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.

Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?

A.

zone exclusion

A.

zone exclusion

Answers
B.

privacy window

B.

privacy window

Answers
C.

area or interest

C.

area or interest

Answers
D.

sensor crop

D.

sensor crop

Answers
E.

restricted mode

E.

restricted mode

Answers
Suggested answer: B

Explanation:

https://documentation.meraki.com/MV/Initial_Configuration/Privacy_Windows

Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

A.

MS Switch

A.

MS Switch

Answers
B.

Meraki Insight

B.

Meraki Insight

Answers
C.

MR Access Point

C.

MR Access Point

Answers
D.

MV Smart Camera

D.

MV Smart Camera

Answers
Suggested answer: C

Explanation:

https://documentation.meraki.com/MR/MR_Splash_Page/Systems_Manager_Sentry_Enrollment

Which information do the MXs in a High Availability pair share?

A.

spanning-tree state

A.

spanning-tree state

Answers
B.

time synchronization state

B.

time synchronization state

Answers
C.

DHCP association database

C.

DHCP association database

Answers
D.

stateful firewall database

D.

stateful firewall database

Answers
Suggested answer: C

Explanation:

DHCP Synchronization To prevent a scenario in which an IP address is assigned by the primary via DHCP and then that same address is assigned to another client by the secondary after a failover, the DHCP lease table is synchronized regularly between the primary and secondary over UDP port 3483. https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?

A.

highest VLAN ID that is configured and set to NO to use VPN

A.

highest VLAN ID that is configured and set to NO to use VPN

Answers
B.

lowest VLAN ID that is configured and set to YES to use VPN

B.

lowest VLAN ID that is configured and set to YES to use VPN

Answers
C.

highest VLAN ID that is configured and set to YES to use VPN

C.

highest VLAN ID that is configured and set to YES to use VPN

Answers
D.

lowest VLAN ID configured and set to NO to use VPN

D.

lowest VLAN ID configured and set to NO to use VPN

Answers
Suggested answer: C

Explanation:

See Behavior - Firmware MX 15.11 or Lower section For MXs running firmware MX15.11 or below, the source IP that MX uses while pinging a destination is the MX IP of highest VLAN ID. If the destination is across a VPN, the MX uses the MX IP of highest VLAN ID participating in VPN. For MXs running firmware MX 15.12+, additional ping options have been added to the live tool. The ping tool now has a drop down to select the source IP address for pinging destinations from the MX. https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Ping_Live_Tool

A new application needs to be pushed to all iOS devices. Some devices report ''NotNow'' in the event log and do not install the application.

What does the ''NotNow'' event indicate?

A.

The application requires the most recent iOS version.

A.

The application requires the most recent iOS version.

Answers
B.

The device is locked with a passcode.

B.

The device is locked with a passcode.

Answers
C.

The device cannot connect to Apple servers.

C.

The device cannot connect to Apple servers.

Answers
D.

The device cannot connect to Cisco Meraki servers.

D.

The device cannot connect to Cisco Meraki servers.

Answers
Suggested answer: B

Explanation:

The error message ''NotNow'' is seen in the Event Log on an iOS device's details page when an action cannot be performed because the device is locked with a passcode. These actions include pushing managed apps, installing profiles, and other actions. When this occurs the device will attempt to re-connect with the MDM server as soon as the device is unlocked in order to retry the action. https://documentation.meraki.com/SM/Monitoring_and_Reporting/Status_of_%22NotNow%22_in_Systems_Manager_Event_Log

Total 72 questions
Go to page: of 8