ExamGecko
Home Home / Huawei / H12-891

Huawei H12-891 Practice Test - Questions Answers, Page 46

Question list
Search
Search

List of questions

Search

Regarding the tag space for MPLS, the description is incorrect

A.
When the penultimate hop LSR performs a label swap, if the swapped tag value is found to be
A.
When the penultimate hop LSR performs a label swap, if the swapped tag value is found to be
Answers
B.
the tag is popped up by default and the message is sent to the last hop
B.
the tag is popped up by default and the message is sent to the last hop
Answers
C.
Above 1024 is the tag space shared by dynamic signaling protocols such as LDP, RSVP-TE, MP-BGP, etc
C.
Above 1024 is the tag space shared by dynamic signaling protocols such as LDP, RSVP-TE, MP-BGP, etc
Answers
D.
16-1023 is a label control shared by static LSPs and static CR-LSPs
D.
16-1023 is a label control shared by static LSPs and static CR-LSPs
Answers
Suggested answer: B

The following statement about ISIS (IPv6) is correct?

A.
In order to support the processing and calculation of IPV6 routes, IS-IS has added TLV232, 236
A.
In order to support the processing and calculation of IPV6 routes, IS-IS has added TLV232, 236
Answers
B.
By default, IS-IS has the multi-topology feature turned on
B.
By default, IS-IS has the multi-topology feature turned on
Answers
C.
IS-IS works at the data link layer and only needs to add a new TLV to support IPv6
C.
IS-IS works at the data link layer and only needs to add a new TLV to support IPv6
Answers
D.
To support the processing and computation of IPv6 routes, IS-IS has added NLPID to the 129TLV
D.
To support the processing and computation of IPv6 routes, IS-IS has added NLPID to the 129TLV
Answers
Suggested answer: A, C, D

When the load is an ICMPv6 message, what is the numeric value of the Next Header field in the IPv6 header if the presence of an extended header is not taken into account?

A.
58
A.
58
Answers
B.
78
B.
78
Answers
C.
55
C.
55
Answers
D.
68
D.
68
Answers
Suggested answer: A, C, D

QinQ technology is a technology that extends the VLAN space by adding a layer of 8021Q tag messages to the extended VLAN. The function of space, the following statement about QInQ is mispronounced?

A.
basic QinQ is implemented based on the interface orientation
A.
basic QinQ is implemented based on the interface orientation
Answers
B.
QinQ increases the number of VLANs to 4095*4095
B.
QinQ increases the number of VLANs to 4095*4095
Answers
C.
Flexible QinQ can be based on different inner layerS Tag and different outer layers of Tag, for user VL The division of AN is more granular
C.
Flexible QinQ can be based on different inner layerS Tag and different outer layers of Tag, for user VL The division of AN is more granular
Answers
D.
QinQ technology enables private VLANs to pass through the public Network
D.
QinQ technology enables private VLANs to pass through the public Network
Answers
Suggested answer: B

Traditional BGP-4 can only manage IP4 unicast routing information, and MP-BGP extends BGP-4 to provide support for multiple network layer protocols. Among them, MP-BGP's support feature for IPv6 unicast networks is called BGP4+,

BGP4+ via NextHop The route next hop address information is carried by the attribute.

A.
TRUE
A.
TRUE
Answers
B.
FALSE
B.
FALSE
Answers
Suggested answer: A

OSPF fast convergence is an extended feature to improve the convergence speed of routing, in which PRC works by speeding up routing computation by performing path calculations only on the affected nodes when the network topology changes.

A.
TRUE
A.
TRUE
Answers
B.
FALSE
B.
FALSE
Answers
Suggested answer: B

The router port to which the policy is applied has been idle for about 10 seconds, and there is a huge burst of c1 type coming in an instant, so how many bytes will the packets that are colored green?

A.
256K bytes
A.
256K bytes
Answers
B.
48128 bytes
B.
48128 bytes
Answers
C.
32K bytes
C.
32K bytes
Answers
D.
80128 bytes
D.
80128 bytes
Answers
Suggested answer: C

In ospf broadcast networks, there are 4 routers RTA, RTB, RTC, and RTDs within the same network segment The DR priorities are 2, 1, 1, and O, and the Router ID is respective 1921681.1, 19216821, 19216831, and 19216841 If the OSPF protocol is enabled on both of these four routers, ospf selects the BDR as

A.
RTB
A.
RTB
Answers
B.
RTC
B.
RTC
Answers
C.
RTD
C.
RTD
Answers
D.
RTA
D.
RTA
Answers
Suggested answer: B

In an MPLSVPN network, when a packet enters the Internet and is forwarded, it is encapsulated with two layers of MPLS tags, and the processing of the packet in the following options is described correctly?

A.
The penultimate hop device receives packets with an outer label of 3
A.
The penultimate hop device receives packets with an outer label of 3
Answers
B.
The Egress PE appliance receives an UNlabeled IP packet
B.
The Egress PE appliance receives an UNlabeled IP packet
Answers
C.
The Egress PE device correctly sends packets to the appropriate VPN
C.
The Egress PE device correctly sends packets to the appropriate VPN
Answers
D.
based on the inner tag The packet pops up the outer label on the penultimate hop device and forwards it to the Egress PE device
D.
based on the inner tag The packet pops up the outer label on the penultimate hop device and forwards it to the Egress PE device
Answers
Suggested answer: A, C, D

There are three port roles defined in RSTP, with alternative ports and backup ports flags in STP messages The port role values within the fields are consistent, all of which are 01

A.
TRUE
A.
TRUE
Answers
B.
FALSE
B.
FALSE
Answers
Suggested answer: A
Total 610 questions
Go to page: of 61