Refer to the exhibit. What can be determined from the command output shown in the exhibit?

The synchronization period is at its default value.

The synchronized data is protected by VRRP.

The command was executed on the standby Mobility Master (MM).

The synchronization period is at its default value.

The other Mobility Master (MM) is the active license server.

Refer to the exhibit. An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. The RAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot to add the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.What should the administrator implement to allow the RAP to connect to the MC at the Secondary DMZ site while the outage at the primary site persists?

Static configuration from apboot mode

Dynamic discovery through DHCP Option 43

Static configuration from apboot mode

Dynamic discovery through DHCP Option 60

Dynamic discovery through multicast ADP

An administrator implements a ClearPass solution to authenticate Aruba wireless users. The Aruba wireless solution is an ArubaOS 8.x Mobility Master (MM) deployment. ClearPass sends an Aruba VSA role name for an authenticated user.However, the administrator notices that the role assigned to the user is different from the one assigned by the ClearPass server.Which two items should the administrator verify that might be the cause of this problem? (Choose two.)

Spelling of the role on the ClearPass server

Role existence on the Managed Network

Enablement of user roles on the controller

Spelling of the role on the ClearPass server

Server-derived role assignment on the ClearPass server

Role existence on the Managed Network

Order assignment that the controller uses to select a user role

Refer to the exhibit. What is true about the configuration shown in the exhibit?

This is an ArubaOS-Switch configured for per-port tunneled node.

This is an ArubaOS-Switch configured for per-user tunneled node.

This is an ArubaOS controller configured for per-user tunneled node.

This is an ArubaOS-Switch configured for per-port tunneled node.

This is an ArubaOS controller configured for per-user tunneled node.

A company opens a new branch office and a RAP is used to connect to a corporate office Aruba Mobility Controller (MC). The company needs to provide connectivity to the office across the street.There is an AP across the street. However, there is no wired connectivity between the buildings.Which actions can the administrator select to provide the required connectivity? (Choose two.)

Provision all Aps at the branch office as Mesh Points.

Provision the RAP as a Mesh Portal.

Provision all Aps at the branch office as Mesh Points.

Provision all Aps at the branch offices as Mash Portals.

Implement one of the Aps as a Mesh Point.

Provision the RAP as a Mesh Portal.

A company has a wireless network that contains a cluster of four Aruba 7030 Mobility Controllers(MC) managed by a Mobility Master (MM) located in the data center. The company has Aps deployed that are nearing the capacity of the cluster. The administrator wants to increase AP capacity.How can the administrator solve the problem?

Add a new controller to the Mobility Master.

Add a Virtual Mobility Controller to the existing cluster.

Add a 7030 controller to the existing cluster.

Add a 7220 controller to the existing cluster.

A group of users on the same floor of a campus residence experience connectivity problems continuously throughout the morning. The administrator suspects that it is a L1 problem with physical interference.What can the administrator do to find the cause of this problem?

Access a controller's spectrum analysis data directly from AirWave with Quick Links.

Access RAPIDS data from AirWave's RAPIDS section.

Access RAPIDS data from AirWave's dashboards, under Home.

Access a controller's spectrum analysis data from AirWave's dashboards, under Home.

An administrator at Campus A manages Aruba Mobility Controllers (MCs). The administrator defines a server group that includes a local ClearPass server and a remote Microsoft RADIUS server. The ClearPass server has the credentials for users at Campus A and the Microsoft RADIUS server has the credentials for users at Campus B. Users at Campus A successfully authenticate and connect to the Campus A wireless network. However, when users from Campus B visitCampus A they fail authentication.What can the administrator do to solve this problem?

Enable FastConnect on the Campus A Mobility Controllers.

Enable machine authentication on the Mobility Controllers.

Enable EAP-TTLS with EAP Termination on the Mobility Controllers.

Enable EAP termination on the ClearPass server.

An administrator troubleshoots a roaming problem where a user loses connectivity to the network during the roaming process. To help troubleshooting this problem, which device or devices in a wireless network initiates the roaming process?

Both the client and the controller

Refer to the exhibit. The branch office RAP shown in the exhibit provides secure wireless employee access. Because of security concerns, the company's security policy does not allow wireless guest access. Some customers that visit the Branch office need Internet access. A RAP's Ethernet Port 3 is used for wired guest access and Port2 is used for wired employee access. When employees connect to Port2, they are authenticated successfully and split-tunnel policy allows them access to both corporate and Internet resources from the Branch office. Guest users, however, cannot access Internet resources on Port 3.How can the administrator provide guest users Internet access?

Configure a bridge role for the wired RAP port.

Implement ClientMatch to handle the employee and guest user traffic correctly.

Implement the MultiZone feature on the RAP.

Configure a bridge role for the wired RAP port.

Create a guest VAP that allows wired RAP port access.

Refer to the exhibit. An administrator implements the MultiZone feature. The administrator sets up five zones as shown in the exhibit in this configuration:-Zone A has six controllers that form a cluster.-Zone B has three controllers that from a cluster.-Zones C, D, and E have a single standalone controller each.A total of 13 VAPs are created across the five zones. Aruba Mobility Controllers (MCs) in Zones A, B and C run ArubaOS 8.1.0.1 MCs in zones D and E run ArubaOS 8.1.0.2. Some APs do not join their respective data zones.What could cause this problem?

The MCs run different versions of the ArubaOS code.

The number of controllers exceeds the maximum for MultiZone.

The MCs run different versions of the ArubaOS code.

The number of zones exceeds the maximum for MultiZone.

The number of VAPs exceeds the maximum for MultiZone.

A guest establishes an authenticated wireless session to an Aruba Mobility Controller (MC). The controller uses a ClearPass server for all AAA functions.Which AAA component disconnects the user when the guest exceeds their allowed duration?

Active Directory Session Limits

In the WebUI of an Aruba Mobility Controller (MC), where recommended approach for this process generate a tech support file that the Aruba Technical Support team can use to help customers?

Diagnostics> Technical Support> System Information

Maintenance> Copy logs> download logs

Diagnostics>Technical Support> Copy Logs

A Microsoft RADIUS server is used to centralize AAA functions by a company. Upon a successful authentication lookup performed by an Aruba Mobility Controller (MC), the administrator wants to have the RADIUS server pass back the correct post-authentication role name that the controller should apply to the user's traffic.Which additional task must the administrator perform for the controller's configuration to implement this process?

Configure the server-derived rules on the controller.

Install ClearPass's VSA file on the controller.

Install Microsoft's VSA file on the controller.

Configure the server-derived rules on the controller.

An administrator needs to support Unified Communications and Collaboration (UCC) in a company's network. The network infrastructure requires the OpenFlow protocol to support SDN-capable applications.Which controller topology meets these requirements?

Mobility Master-Mobility Controller

Refer to the exhibit. An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown in the exhibit?

User load balancing is enabled.

This is an L2-connected cluster.

This is an L3-connected cluster.

An administrator defines credentials in the Mobility Master> Configuration> System section to configure a Mobility Master (MM). The administrator then accesses AirWave and adds the MM in Monitor-Only mode. The administrator expects AirWave to automatically discover the Aruba Virtual Mobility Controllers (VMCs) also managed by the MM, but does not see these under APs/Devices> New section in AirWave.What should the administrator do to solve this problem?

Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and have AirWave repoll the Mobility Master.

Enable Automatic Device Authorization for the Group the Mobility Master belongs to in AirWave.

Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and then scan for the Virtual Mobility Controllers in AirWave.

Define the AirWave communication parameters on the Virtual Mobility Controllers, and then scan for the Virtual Mobility Controllers in AirWave.

Define AirWave communication parameters for the Virtual Mobility Controllers on the Mobility Master, and have AirWave repoll the Mobility Master.

An administrator has multiple AAA servers, some Microsoft RADIUS and some ClearPass. When 802.1X users authenticate, the administrator wants to ensure that the authentication requests are handled by the appropriate AAA server.Users enter their username in this format: username@domain_name.What must the administrator implement to ensure the correct AAA server processes the authentication request?

server matching rules for the server group

server matching rules for the VAP profile

server matching rules for the server group

server matching rules for the AAA profile

server matching rules for the 802.1X profile

Refer to the exhibit. An administrator configures policies to allow RAPs to connect to the corporate office and remote users to access resources. Which function does the VPN address pool serve in this situation?

Assigns an inner IP address to the RAP used within the VPN

Assigns a public IP address that the RAP should use on its internet port

Assigns IP addresses for remote users

Assigns a DHCP address pool for the RAP

Refer to the exhibit. An administrator configures a policy for an AP Group. Port 3 of a RAP is a trunk that connects to a switch at a branch office. VLAN 1 is untagged and VLANs 10 (for data) and 11 (for voice) are tagged.The administrator applies an ACL inbound on Port 3 of the RAP.How does this configuration affect traffic on Port 3?

It filters traffic from VLANs 1, 10, and 11.

It filters traffic from VLAN 10 and 11, but allows traffic from VLAN1.

It filters traffic form VLAN 1, but allows traffic from VLANs 10 and 11.

It allows all traffic form VLANs 1, 10, and 11.

It filters traffic from VLANs 1, 10, and 11.

An administrator purchases a RAP and has it shipped directly to a branch office. The branch office plugs in the RAP and the RAP contacts Aruba Activate. The RAP learns the Mobility Controller (MC) IP address and connects to it. However, the connection fails.Upon verifying the MC IP address in Aruba Activate, what should the administrator do to allow the RAP connection to succeed?

Whitelist the RAP's certificate on the MC.

Whitelist the RAP's IP address on the MC.

Define the RAP's IPSec pre-shared key in Activate.

Whitelist the RAP's certificate on the MC.

Configure a VPN address pool in Activate.

An administrator has a standalone controller that runs ArubaOS 8.x software and wants to upgrade it to a newer release. The upgrade will be performed from the front panel of the physical controller.The administrator places the new software in the root directory of a USB drive. On the controller's LCD panel, no image is found.What is the cause of this problem?

The image must be placed in the /ArubaImage subdirectory.

The image must be placed in the /Upgrade subdirectory.

The image must be placed in the /Images subdirectory.

The image must be placed in the /ArubaImage subdirectory.

The upgrade must be performed from the controller's WebUI.

What is true about Aruba controllers under normal operations in a Mobility Master (MM)-Mobility Controller (MC) architecture?

The Mobility Master can push a full configuration to a Mobility Controller.

ARM must be used to optimize wireless performance.

The APs can terminate on both Mobility Masters and Mobility Controllers.

Any controller can perform local configurations.

Refer to the exhibit. An administrator configures a cluster with only the members shown in the exhibit. AP load balancing is enabled. There are no other cluster parameters configured. What occurs when a cluster member experiences a failure?

Connected users are de-authenticated

High value sessions are synchronized.

APs and clients are fully replicated.

Connected users are de-authenticated

APs reboot and rejoin the cluster.

Refer to the exhibit. Controllers are configured in a cluster as shown in the exhibit. These are the network details.-A Mobility Master (MM) managers the cluster.-The cluster contains two controllers: C1 and C2.-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (SAAC).-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.

The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.

The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.

The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.

The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.

HP HPE6-A71 Practice Test 1 - Free Online Exam Questions 1-40

An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs).

Which role should be assigned to an administrator who needs to only generate reports and monitor WLANS and ports?

Location-api-management

Network-operations

Root

AP-provisioning

Comment (0)

HP HPE6-A71 Practice Test 1

Question

HP HPE6-A71 Practice Tests

Practice Tests