Which Aruba Mobility Controller (MC) command should an administrator execute to determine whether an ArubaOS-Switch successfully registers to an MC?

show tunneled-node-server state

Refer to the exhibit. An administrator implements AP licensing on a Mobility Master (MM).Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses in CampusC are allocated.Each campus is responsible to purchase its own AP licenses.There are 900 AP licenses deployed in the global pool.There are three dedicated pools.From the global pool, 300 AP licenses are assigned to each dedicated pool.What can the administrator do to add capacity for CampusA in alignment with campus policies?

Move 100 licenses from the CampusC pool to the global pool.

Allow CampusA to share from the CampusC pool.

Add 100 more AP licenses and assign them to the CampusA pool.

Move 100 licenses from the CampusC pool to the global pool.

Add 100 more AP licenses to the global pool.

An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.What must the administrator do to solve this problem?

Add the MultiZone APs to the data zone's CPSec whitelist.

Enable CPSec in the MultiZone profile for both the primary and data zone.

Enable MultiZone booting in the MultiZone AP apboot configuration mode.

Add the MultiZone APs to the data zone's CPSec whitelist.

Use different AP Group names for the two zones.

An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication passes, but the 802.1X user authentication fails for a user who connects?

Machine authentication default machine role

Machine authentication default user role

An administrator supports a group of engineers that commonly troubleshoot company problems from any location without wired connectivity. They need secure connectivity to a corporate webbased portal with their Android smartphones.Which solution should the administrator recommend to solve the engineer's connectivity problem?

Deploy Mobile Device Management

An administrator wants to implement the MultiZone feature in a company's network to segregate corporate and guest traffic. Corporate traffic will have APs establish connections to a cluster managed by a Mobility Master (MM), and guest traffic will have the same APs establish connections to a standalone controller at the company's DMZ.What is true about the implementation of MultiZones in this scenario?

The primary zone maintains full control of AP management and configuration.

The MultiZone feature must be enabled in the data zone.

The primary zone maintains full control of AP management and configuration.

The primary and data zones must be in the same L2 subnet.

A MultiZone AP can initially connect to any zone to obtain its configuration.

An administrator configures a port on a RAP through the association of an AAA profile with 802.1X authentication to a RAP Ethernet port. This port connects to a switch with user desktops attached.The administrator notices that when users connect wirelessly to the RAP, a user role correctly restricts their traffic. But, when users connect with their wired desktops, they are assigned an initial role and routed to a Captive Portal page.What must the administrator do to enable desktop usage based on the user's role assignment?

Identify the RAP port as untrusted.

Implement ACLs on the RAP port.

Apply a server-derived role policy to the RAP port.

Identify the RAP port as untrusted.

Map the RAP port to an authentication profile.

An administrator makes a configuration change on a Mobility Master (MM) that causes a Managed Controller to lose connectivity with the MM. The MC attempts auto roll-back, but this fails.How should the administrator recover from this problem?

Access the CLI of the MC, execute the disaster-recovery command, and undo the changes.

Access the CLI of the MC and execute the no command to revert the changes.

Access the CLI of the MC and identify the previous configuration file the MC should use.

Reboot the MC to force auto-roll back to occur.

Access the CLI of the MC, execute the disaster-recovery command, and undo the changes.

An administrator sets up a network scan set in AirWave to scan a subnet to identify devices for a firmware upgrade. The scan completes and AirWave successfully uses the SNMP credentials to validate SNMP access. However, SSH access fails and the administrator must manually configure the SSH credentials used for all of these devices.What should the administrator have done before running the network scan?

Change the default credentials of the devices.

Define a scan credentials set for the devices.

Monitor the devices for needed firmware upgrades.

Change the default credentials of the devices.

Manually upgrade the firmware of the devices.

An administrator needs to add connectivity between two buildings that are within 15 meters of each other on a company's campus. The administrator decides to implement Aruba's wireless mesh feature between an AP in each building. How should the administrator deploy the two APs to implement the mesh feature?

one as a Mesh Portal AP and one as a Mesh Point AP

one as a Mesh Portal AP and one as a Remote Mesh Point AP

one as a Mesh Portal AP and one as a Mesh Point AP

one as a Remote Mesh Portal AP and one as a Remote Mesh Point AP

one as a campus AP and one as a Mesh Point AP

An administrator wants to implement a cluster of Aruba Mobility Controllers (MCs). Which guideline should be followed?

Verify that all the controllers run the same release of software.

Implement Virtual Mobility Controllers and Mobility Controllers in the cluster to provide scalability.

Verify that all the controllers run the same release of software.

Purchase a cluster license to enable clustering

Implement High Availability (HA) AP Fast Failover for redundancy.

Refer to the exhibit. An administrator wants to verify the operation of MultiZone in a network. The administrator uses the command show ap debug multizone to generate the output shown in the exhibit.Based on the output, which statement is true?

The primary zone has limited the data zone to one WLAN.

Zone 1 is the primary zone, and zone 0 is the data zone.

The primary zone has limited the data zone to one WLAN.

The maximum VAPs in the MultiZone is 15.

The MultiZone APs are in a cluster.

An administrator supports an Aruba wireless network. The administrator configures as AAA profile referenced in a WLAN profile, where:The initial role assigned in the AAA profile is logonThe MAC authentication default role is guestThe 802.1X authentication role is authenticated ClearPass is used to verify the 802.1X user credentials. A user authenticates and is assigned the authenticated default role instead of the role assigned in the ClearPass server configuration.What must the administrator do so that the ClearPass role is assigned to the user?

Select the Server-derived roles in the Server Group section.

Select the Server-derived roles User Role in the AAA profile.

Verify the role exists on the controller.

Create the Download Role from CPPM User Rule.

Select the Server-derived roles in the Server Group section.

Refer to the exhibit. What is true about the operation of the Aruba Mobility Controller (MC) shown in the exhibit?

The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.

The Mobility master is in disaster recovery mode and will push changes to a Managed Controller.

The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.

The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.

The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.

An administrator enables AP load balancing for a cluster of Mobility Controllers (MCs). APs connected to the cluster have an LMS IP address configured in their AP Group configuration. No other parameters are changed in the cluster.If the two load AP thresholds are reached, what occurs?

The users and APs are rebalanced across the cluster.

The APs are rebalanced across the cluster.

The APs always stay connected to the LMS IP address configured in the AP Group profile.

The users are rebalanced across the cluster.

The users and APs are rebalanced across the cluster.

An administrator implements per-user tunneled node that involves ArubaOS-Switches and Aruba Mobility Controllers (MCs). What always happens when a wired client connects to the network?

Wired users map to an AAA profile on the controller.

All switch traffic is tunneled to the controller.

The switch performs user authentication.

The tunnel fails unless VMCs are used.

Wired users map to an AAA profile on the controller.

HP HPE6-A71 Practice Test 4 - Free Online Exam Questions 121-160

An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.

Which process should the administrator perform to reset the AP back to its initial default state?

Become a Premium Member for full access

Unlock Premium Member

HP HPE6-A71 Practice Test 4

Question

HP HPE6-A71 Practice Tests

Practice Tests